K R A ME R E LE CT R O N IC S L TD .
Contents 1 Introduction 1 2 2.1 2.2 Getting Started Achieving the Best Performance Recycling Kramer Products 2 2 3 3 Overview 4 4 Your Galil 6-C Closed-back Ceiling Speakers 5 5 5.1 5.2 5.3 5.4 5.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis.
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment i 2.1 Review the contents of this user manual Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.2 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility.
3 Overview The Galil 6-C consists of a pair of high performance closed back speakers. Mount your Galil 6-C speakers to the ceiling in one of two ways: either directly onto the ceiling or, for added protection, secure the speakers safely, using our ceiling mounting kit that is provided free (see Section 5.3). The Galil 6-C speakers feature a multi-tap power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V power settings that are suitable for an array installation.
4 Your Galil 6-C Closed-back Ceiling Speakers Figure 2 defines the Galil 6-C: Figure 2: Galil 6-C Closed-back Ceiling Speaker The following table defines the Galil 6-C hardware items (per speaker pair) for each model in the series: Description A pair of ceiling speakers (one shown) Two grilles (one shown) Cutout template This table defines the ceiling mounting kit items: Four support ring screws Two ceiling support rings (C-ring) – one shown Galil 6-C - Your Galil 6-C Closed-back Ceiling Speakers T
Each Closed-back Ceiling speaker is supported by a C-ring and two tile rails. The tile rails prevent the speakers from falling if the tile itself comes out or falls apart, as their ends catch onto the T-grid. When mounting onto the ceiling tiles, use both supports. When mounting onto a sheetrock ceiling, the C-ring alone is used to reinforce the ceiling material. i Be sure that the tiles can support the speaker. Smaller sized tiles or fiberglass-type tiles cannot support the weight of the speakers.
5 Installing the Galil 6-C Closed-back Ceiling Speakers This section explains how to install the Galil 6-C, that is: 5.1 Choosing the best place to locate your speakers (see Section 5.1) Cutting the ceiling tile (see Section 5.2) Mounting the Speakers (see Section 5.3) Setting up an array installation (see Section 5.4) Painting the speakers (see Section 5.4) Choosing the Best Location Ideally, locate the speakers above the main listening area.
4. Route the wiring from the amplifier to the speakers’ cutout holes, taking care not to place them next to electrical wires or at least at a distance of about two feet from an AC line. ! Do not nail or staple the speaker wires. If you are mounting the speakers onto a ceiling tile, remove the ceiling tiles where you plan to install the speakers. Use the template to trace and then cutout the speaker hole over an empty box.
T-channel Grid C-ring Support Ring Screws Ceiling Tile Tile Rails Figure 4: Mounting the Galil 6-C 2. Place the tile rails on the tile and snap them into the two tabs on the C-ring. Align the rails so that the ends extend over the T-channel grid. 3. Insert a screw through each tab on the C-ring to secure the rails. 4.
Figure 5: Plugging and Securing the Cable 7. Push the speaker into the ceiling hole until the front baffle rim is leveled with the ceiling. 8. Tighten the mounting tabs by turning the screw counter clockwise (see Figure 6). Turning one quarter of a circle rotates the tab outwards; after that the screw is turned to tighten the tabs to the rear side of the ceiling surface When tightening the mounting tabs, the tabs automatically turn outward, thus clamping the speaker to the wall from its rear side.
Figure 7: Adjust Tap Selector 11. Install the grilles to the speakers: Push the grille fastener into the hole in front of the baffle Press the grille into place until the front of the grille is flush with the rim of the baffle i 5.4 Check that the grille is securely seated To remove the grille, insert two bent paper clips into the holes in the grille and carefully pull it down. Repeat this around the perimeter of the grille until it is completely removed.
Figure 8: Square Layout Figure 9: Hexagonal Layout You can set the power on each speaker to get the desired power level in different installation areas.
Figure 10: Square Layout Parallel Wiring Galil 6-C - Installing the Galil 6-C Closed-back Ceiling Speakers 13
5.5 Painting the Speaker You can paint the speakers before or after they are installed. When painting before installation: Clean the rim and grille with mineral spirits or other light solvent that is unlikely to damage the surface Spray with color by holding the spray can at an angle of 45 i When spraying the grille, take care not to clog the holes in the grille as this will greatly reduce the sound quality of the speakers.
6 Technical Specifications Galil 6-C Audio and Power DESCRIPTION: 2−Way closed-back ceiling speakers FREQUENCY RESPONSE: 80Hz to 20kHz @ -10dB 95Hz to 20kHz @ ±3dB WOOFER: 6.5” (165mm) polypropylene with rubber surround TWEETER: 0.5” (13mm) Mylar dome IMPEDANCE: 8Ω (transformer tap in off position) TRANSFORMER TAPS: 70V – 3.7W / 7.5W / 15W / 30W / Off (Lo-Z) 100V – 7.5W / 15W / 30W / Off (Lo-Z) SENSITIVITY: 87dB SPL, 1W@1m MAX SPL: Continuous: 100.7dB Peak: 103.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.
