Quick Start Guide

102MX Quick Start
P/N:
29 0 0 - 3 0 1 2 8 6 QS
Rev:
2
Scan for full manual
102MX Quick Start Guide
This guide helps you install and use your 102MX for the first time.
Go to www.kramerav.com/downloads/102MX to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
102MX 2 Channel Audio Mixer
4 Rubber feet
1 Quick start guide
1 Power supply (12V DC)
1 Bracket set
Step 2: Get to know your 102MX
#
Feature
Function
1
LINE OUT (L, R) RCA Connectors
Connect to the right and left channels of a line level stereo audio acceptor.
2
LINE 2 IN (L, R) RCA Connectors
Connect to the right and left channels of a line level stereo audio source.
3
TALK OVER Button
Press to activate the talk-over function.
4
MIC SELECT Button
Press to select the Input 1 mic level signal, release to select Input 1 line level signal.
5
COND. MIC Button
Press for a powered condenser mic, release for an unpowered dynamic mic.
6
MIC/LINE 1 IN 6mm Socket
Connect to a mic or line level source.
7
MASTER LEVEL Knob
Use to control the mixed signal output level.
8
LINE 2 LEVEL Knob
Use to control the line 2 input level.
9
MIC/LINE1 LEVEL Knob
Use to control the mic/line 1 input level and talk-over sensitivity.
10
ON LED
Lights when the unit is ON.
11
12V DC Connector
Connect to the 12V DC power supply.
Step 3: Mount 102MX
Install 102MX using one of the following methods:
• Attach the rubber feet and place the unit on a flat surface.
• Fasten a bracket (included) on each side of the unit and attach it to a flat surface
(see www.kramerav.com/downloads/102MX).
• Mount the unit in a rack using the recommended rack adapter
(see www.kramerav.com/product/102MX).
• Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.