Manual

P/N: 2900-000918
Your XE-13A 1:3 Audio Distributor
Congratulations on purchasing your XE-13A, which is intended for presentation and
multimedia audio distribution. Your XE-13A 1:3 Audio Distributor takes one stereo input and
distributes the signal to three identical stereo outputs. Your XE-13A 1 includes separate left
and right audio level (gain) controls.
The XE-13A uses a 12V DC power adapter that’s provided free!
Connecting the XE-13A 1:3 Audio Distributor
To setup your XE-13A, connect:
1. An unbalanced audio source to the left and right RCA connectors.
2. The OUTPUT left and right RCA connectors to up to three acceptors.
3. The 12V DC power adapter to the power socket and connect the adapter to the mains
electricity.
4. If required, adjust the LEFT and RIGHT audio signal levels.
Note:
Use good quality connection cables to avoid interference, deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables) and position your product away from moisture, excessive sunlight and dust.
Caution – No operator-serviceable parts inside unit.
Warning – Use only the XE input power wall adapter that is provided with this unit.
Warning – Disconnect power and unplug unit from wall before installing or removing device or servicing unit.
For assistance, contact your dealer. Product Warranty is for one year.