User's Manual

Installation manual

The MTWE is designed for inside / outside installations for all non pit applications.

MTWE is a long range radio Meter Transmission Unit (MTU). The MTU interrogates the

encoder register at a preprogrammed interval to obtain the most recent read, and

transmits the data to the base station receiver. Single- port and dual-port encoder type

MTUs are available.

Required tools and materials

• Wire stripping tool.

• Screwdriver – small standard head for terminal connections.

• Power drill and bit (¼”).

• 1¼ “sheet metal / wood screws.

• FTU101

• FTU100WMP

Wall mount – Installation Process

• Place the mounting bracket on intended installation location.

• Mark the location to pre drill the holes.

• Remove the bracket from the wall and use a ¼” drill bit to pre drills the holes.

• Place the bracket on the wall and align it with the holes.

• Mount the bracket to the wall using two 1¼” screws.

Figure -Error! No text of specified style in document.1: Wall Mount Installation Process

PAGE 1
Installation manual The MTWE is designed for inside / outside installations for all non pit applications. MTWE is a long range radio Meter Transmission Unit (MTU). The MTU interrogates the encoder register at a preprogrammed interval to obtain the most recent read, and transmits the data to the base station receiver. Single- port and dual-port encoder type MTUs are available. Required tools and materials • Wire stripping tool. • Screwdriver – small standard head for terminal connections.
PAGE 2
Pipe Mount – Installation Process • Place the mounting bracket on the intended installation location. • Fasten the mounting bracket on the pipe using two screws and the “omega” bracket (see figure). • Slide the MTU on the mounting bracket until the four clips lock the unit in place.