0’x12’ Alexander hardtop gazebo with double roof Assembly Manual Kozyard LLC Products © Copyright 2016 - 2019 Kozyard LLC. | All Rights Reserved.
+ 1.Two or more people are required for assembly. 5.Use the hex keys in the box. 6.Please use a Phillips screwdriver. 2.You will need one or more stepladders. 3. Wearing protective gloves is recommended. 4.You may need a safety hat. 7.Do not fully tighten screws prior to complete assembly. 8.For ease of construction, you may need touse a drill. Alexander 10x12' ANCHOR BLUEPRINT 363cm/11.9' 30x30cm/11.8"x11.8" 296cm/9.7' 15cm/5.9" 266cm/8.7' 333cm/10.
J1 x4 A x4 J2 x4 B x2 B1 x2 K x1 B2 x2 K1 x1 C x2 L x4 C1 x2 M x4 C2 x2 N x4 D x2 D1 x2 D2 x2 E x2 E1 x2 E2 x2 F x4 G x4 H x4 H1 x4 page 1 ITEM A B B1 B2 C C1 C2 D D1 D2 E E1 E2 F G H H1 J1 J2 K K1 L M N DESCRIPTION Pole Beam Joint Bar Sidewall Track Beam Jointer Bar Sidewall Track Beam Jointer Bar Sidewall Track Beam Jointer Bar Sidewall Track Union Bar Corner Cover Joint Cover Joint Cover Corner Solidifyng Bar Corner Solidifyng Bar Inside Roof Connector Outside Roof Connector Base Corne
P1 x2 P x2 W3 x2 W4 x2 Q x2 Q2 x2 Q1 x2 W2 x2 R x8 W5 x2 S x104 W6 x2 W1 x2 T1 x2 T2 x2 X5 x2 X4 x2 U1 x4 U2 x4 ITEM P P1 Q U3 x4 V1 x2 Q1 Q2 U4 x4 R S T1 T2 U1 U2 U3 V2 x2 U4 U5 U6 V1 V2 V3 V4 V3 x2 V4 x2 V5 x2 V5 V6 V6 x2 W3 W4 W1 W2 W5 W6 X4 X5 AA x1 page 2 DESCRIPTION Finishing Bar Net Frame Finishing Bar Net Frame Net Frame Finishing End Spacer Finishing Bar Finishing Bar Solidifying Bar Solidifying Bar Solidifying Bar Solidifying Bar Iron Angle Iron Angle Roof Panel Roo
# x64+3 6# x8+1 X3 x2 X6 x2 7# x28+2 8# x4+1 9# x24+2 X1x2 X2 x2 X7 x2 10# x4+1 X8 x2 11# x8+1 Allen key Y x4 Wrench Y1 x4 ITEM X1 X2 Z x56 X7 Z1 x4 X8 X3 Z2 x4 X6 Y Z3 x4 Y1 Z Z1 Z2 Z4 x4 1# x206+3 2# x16+2 3# x16+2 4# x104 page 3 DESCRIPTION QTY Roof Panel Roof Panel 2 2 Roof Panel Roof Panel 2 Roof Panel 2 2 Roof Panel 2 Mosquito Sidewall Solid Sidewall 4 4 Metal Bracket 56 4 4 Metal Bracket Metal Bracket Z3 Z4 Metal Bracket Metal Bracket 1# 2# Screws 4 4 20
Step 1: Parts Required: L x4 Set up poles (Part A) with stand plates (Part L) using screws 1# as shown in diagram.
Parts Required: F x4 C x2 B x2 E x2 D x2 1# X16 B X2 C C 1# B F 1# Step 2: Connect (Part C) and (Part B) into one beam using union bar (Part F) with screws 1#. ③ D X2 E E 1# F 1# Connect Part E and Part D into one beam using union bar (Part F) with screws 1# as shown in diagram.
Parts Required: B1 x2 1# x80 C1 x2 C2 x2 B2 x2 D1 x2 E1 x2 D2 x2 E2 x2 Step 3: E1 E2 D1 D2 D E B1 B2 C1 C2 C B Connect parts (E2&D2) to the finished beam (part E& part D) using screws 1# as shown in diagram. Replicate the same steps for parts (C2 & B2), attaching them to the finished beam (C & B) using screws 1#. 1# Attach parts (E1& D1) to finished beam (E & D) using screws 1#. Attach parts (C1 & B1) to finished beam (C & B) using screws 1#.
Parts Required: 3# x16 2# x16 Step 4: 2# Use screws (2# & 3#) to connect poles and beams together as shown in diagram.
Parts Required: J1 x4 1# 1# J1 1# x32 J2 x4 1# J2 Step 5: Affix the frame with corner solidifying bars (Parts J1 & J2) using screws 1# as shown in diagram.
Parts Required: 8# x4 H x4 G x4 9# x24 9# 9# G H 9# ① ② Step 6: ① Finish connecting beams using corner covers (Part G) and screws 9# as shown in diagram. ② 8# Affix middle beams using joint cover (Part H) and screws 9# and 8# as shown in diagram.
Parts Required: 4# x104 H1 x4 ① ② E B ① ② D C After finish hooks into tracks, then put H1 to lock them.
Parts Required: AA X4 Reminder: with silicone rubber to seal after finishing the assembly it will be better for no water leaking in heavy rain.
Parts Required: P x2 M x4 K x1 1# x16 R x4 Q x2 Step 8: Set up roof frame Q M M 1# 1# P K 1# P 1# Q ② Connect the inside roof connect(Part K) with the corner roof bar (Part M)using screws 1#. M M M ② Attach finishing bar (Part P&Q)with finish end (Part R) using screws 1# to corner roof bar (Part M) as M shown in diagram.
Parts Required: 1# x16 N x4 Step 9: P1 x2 Q1 x2 N Q2 11# x8 Q2 x2 Q1 1# 1# N N 1# P1 1# Q1 Q1 Q2 N Q2 11# 1# 1 1# 1 1# N N N ① ① P1 N ① P1 P1 N 1# 11 # Attach roof bar(Part N) to inside roof connector using screws 1#, Attach net frames (Part P1,Q1&Q2) to finishing bars (Part P &Q) using screws 1#&11# as shown in diagram. Q1 Q2 N ① Attach roof bar (Part N) to main frame using screw 1# as shown in diagram.
Parts Required: K1 x1 1# x2 1# 1# K K1 Step 10:Connect outside roof connctor (Part K1)to inside roof (Part K)using screw 1# as shown in diagram.
Parts Required: Step 11: Cover metal bracket (Part Z,Z1,Z2) to roof panels as shown in diagram.
Parts Required:1# T1 x2 x8 R x4 T2 x2 R V4 T2 V5 V6 V3 R V2 T1 1# V1 T1 V1 V2 R R V3 V4 V5 1# T2 1# Step 12: Attach finishing bars (Part T1&T2)to upper roof with finish end (Part R) using screws 1#as shown in diagram. Push the roof panels (Part v1,v2,v3,v4,v5,v6)to upper roof as shown in diagram.
Parts Required: U1 x4 U2 x4 U3 x4 U4 x4 1# x24 U1 U2 U1 U2 U1 ② ② U2 U2 U1 ① Step 13: Affix solidifying bars to roof corner bar using iron angle (Part U3) and screw 1# as shown in diagram. Affix solidifying bars (Part U1&U2)together to roof bar using iron angle (Part U4) and screws 1# as shown in diagram.
Parts Required: Step 14: Cover metal bracket (Part Z,Z3,Z4) to roof panels as shown in diagram.
Parts Required: page 19
Overall roof assembly: Please put the panels on the frame anti-clockwisely W6 X1 X3 W5 X2 W4 X4 W3 X5 W2 X6 W1 X7 X8 W1 W2 W3 W4 X2 W5 X1 W6 Connect roof as below: page 20 X3 X4 X5 X6 X7 X8
Parts Required: S x104 7# x28 6# x8 5# x64 Step 15:Affix roof panels using 1 0# 6# screws and spacers (Part S) as shown in diagram. X4 Attention: Put on one roof panel and fasten it accordingly before attaching second roof panel.
Parts Required: Step 16: Hang up mosquito sidewalls and solid sidewalls as shown in diagram.
Parts Required: X4 Step 17: When you close the curtain,please tie fabric strape to fix with poles as shown in diagram. There are three ways to secrue your netting and curtains to the legs using the include 4 ties: 1.) Securing just the netting. 2.) Securing netting and curtains. 3.) Use all ties for winding conditions. In the end,Check all screws are fixed tightly before using.
66 Kozyar A Mer © W Copyright 2016 - 2019 Kozyard LLC. | All Rights Reserved.