Specifications Max. Weight Capacity 110 lbs (50kg) Speed 25mm/s Input Voltage 120-240 V Min. Height 29.5" (749mm) Max. Height 47.2" (1200mm) Duty Cycle 10% (Working 2 minutes then stop 18 minutes) Certification FCC Accessory Package PLEASE NOTE: Check that you have received all components and hardware before assembling. If you are missing any parts, please contact us for replacement parts. A.3/4"Medium Machine Screw -8 D.Double End Cam Lock Screw - 6 H.Self-adhesive Cable Strap - 3 K.
Accessory Package O.Foam Tape- 12 Q.Spanner - 1 P.
Parts PartsIncluded Included NO. Parts 1 Qty NO.
STEP 1 2 1 D.Double End Cam Lock Screw - 3 E.Cam Lock - 6 05 F.
STEP 2 M.CAM SCREW- 10 L.
STEP 3 9 5 7 10 6 8 J.Wood Dowel - 8 07 N.
STEP 4 I.
STEP 5 4 3 D.Double End Cam Lock Screw - 3 E.Cam Lock - 6 09 F.
STEP 6 Before tighten all the screws , be sure check whether the hole is consistent with the correspongding position on the manual. I. 1-1/2''Flat Head Screw - 14 10 J.
STEP 7 14 18 13 18 A.3/4"Medium Machine Screw 11 -8 G.
STEP 8 Before installing part 12 , press the metal bar all the way down. 12 14 13 B.1/2"Small Machine Screw - 6 12 G.
STEP 9 1. Expand the rod's length to the end. 2. Expand the rod's length to the marked location, make sure to leave a gap in between the nut and metal rod around 40-60mm. 3. Tighten by twisting both screw nuts. 2 1 16 2 2 13 14 3 3 40-60MM 2 Q.
STEP 10 Peel off the sticker 15 15 O.
STEP 11 Before tighten all the screws , be sure check whether the hole is consistent with the correspongding position on the manual. C.
STEP 12 Before tighten all the screws , be sure check whether the hole is consistent with the correspongding position on the manual. 15 15 C.
STEP 13 B.1/2"Small Machine Screw - 4 17 G.
STEP 14 K.Grommet - 2 P.
STEP 15 17 Leveling foot adjustment 17 19 Hook - 2
STEP 16 2 1 3 Tighten the strap Peel off sticker Tighten Up Screws (Optional) Interface for motor cable Insert cable through the strap Power Cord H.Self-adhesive Cable Strap - 3 20 L.
STEP 17 The 'Child Lock' button is for height position lock and factory reset purpose.
STEP 18 Handset Instruction Functionality Button REMINDER button, to activate the " Long-Time Sitting Reminder " function UP Button, to lift the desk surface DOWN Button, to lower the desk surface LED Display Position 1, User saves the 1st Height Position Position 2, User saves the 2nd Height Position Position 3, User saves the 3rd Height Position Child Lock , to Lock/Unlock height position, and factory reset purpose. USB type-c Wireless Charger Operation Guide Reset Process a.
Troubleshooting This list is used for checking and solving common faults and errors. The LED displays an error code with warning sound when problem occurs. In most cases, problem should be resolved by reconnecting cables and run a factory reset mode. If problem you encounter is not on the list below, please contact the manufacturer for assistance.
Attention ·Power supply: AC120V ± 10%, frequency 60HZ; ·Working environment: 32º - 1 0 4º F ; ·Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the connection line and keep the plug in a safe position. ·Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.