Specifications Max. Weight Capacity 110 lbs (50kg) Speed 25mm/s Input Voltage 120-240 V Min. Height 28.5" (724mm) Max. Height 47.2" (1200mm) Duty Cycle 10% (Working 2 minutes then stop 18 minutes) Certification FCC Accessory Package PLEASE NOTE: Check that you have received all components and hardware before assembling. If you are missing any parts, please contact us for replacement parts. A.3/4"Medium Machine Screw D.Double End Cam Lock Screw - 3 H.Self-adhesive Cable Strap - 3 L.
Diagram of Components 2 1 10 4 3 7 9 7 9 6 5 8 8 Parts Included NO. Parts 1 Qty NO.
STEP 1 6 8 5 8 A.3/4"Medium Machine Screw 04 -8 G.
STEP 2 Before installing part 3 , press the metal bar all the way down. 3 6 5 B.1/2"Small Machine Screw - 6 05 G.
STEP 3 1. Expand the rod's length to the end. 2. Expand the rod's length to the marked location, make sure to leave a gap in between the nut and metal rod around 40-60mm. 3. Tighten by twisting both screw nuts. 2 1 16 2 2 13 14 3 3 40-60MM 2 M.
STEP 4 Assemble your unit on a carpeted floor or on the empty cartoon to avoid scratching your unit or the floor. 1 Please ensure handset right facing you I.Handset -1 N.3/8" Small Wood Screw - 1 07 O.
STEP 5 Before tighten all the screws , be sure check whether the hole is consistent with the correspongding position on the manual. 10 2 J J J N J N J K Power Indicator L J.1/2"Medium Wood Screw - 5 K.Power Adapter - 1 08 L.Control Box - 1 N.
STEP 6 2 1 D.Double End Cam Lock Screw - 3 E.Cam Lock - 6 09 F.
STEP 7 Before tighten all the screws , be sure check whether the hole is consistent with the correspongding position on the manual. C.
STEP 8 Before tighten all the screws , be sure check whether the hole is consistent with the correspongding position on the manual. 7 7 C.
STEP 9 B.1/2"Small Machine Screw - 4 12 G.
STEP 10 Interface for handset cable Power Cord Interface for motor cable 13
STEP 11 1 2 3 Tighten the strap Peel off sticker Tighten Up Screws (Optional) Insert cable through the strap J.1/2" Medium Wood Screw - 3 14 H.
STEP 12 9 Leveling foot adjustment 9 15 Hook - 2
STEP 13 The 'Child Lock' button is for height position lock and factory reset purpose. Factory reset is required for first time initialization Connect Power Cable to Power Adapter K.
STEP 14 Handset Instruction Functionality Button REMINDER button, to activate the " Long-Time Sitting Reminder " function UP Button, to lift the desk surface DOWN Button, to lower the desk surface LED Display Position 1, User saves the 1st Height Position Position 2, User saves the 2nd Height Position Position 3, User saves the 3rd Height Position Child Lock , to Lock/Unlock height position, and factory reset purpose. Wireless Charger Operation Guide Reset Process a.
Troubleshooting This list is used for checking and solving common faults and errors. The LED displays an error code with warning sound when problem occurs. In most cases, problem should be resolved by reconnecting cables and run a factory reset mode. If problem you encounter is not on the list below, please contact the manufacturer for assistance.
Attention ·Power supply: AC120V ± 10%, frequency 60HZ; ·Working environment: 32º - 1 0 4º F ; ·Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the connection line and keep the plug in a safe position. ·Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.