Standing Desk K310 Any questions or issues please contact us www.kowohome.com Tel : 888-672-0882 Email:service@kowohome.
Specifications Max. Weight Capacity 110 lbs (50kg) Speed 25mm/s Input Voltage 120-240 Min. Height 28.7" (730mm) Max. Height 47.2" (1200mm) Duty Cycle 10% (Working 2 minutes then stop 18 minutes) Certification FCC PLEASE NOTE: Check that you have received all components and hardware before assembling. If you are missing any parts, please contact us for replacement parts. A.3/4"Medium Machine Screw -8 D.Self-adhesive Cable Strap - 3 G. Hooks- 2 B.1/2"Small Machine Screw - 8 E.
Diagram of Components 1 2 3 3 Parts Included NO. Parts 1 Qty NO.
STEP 1 B.1/2"Small Machine Screw - 8 04 C.
STEP 2 A.3/4"Medium Machine Screw 05 -8 C.
STEP 3 G E. 5/16"MACHINE SCREW- 4 06 G.
STEP 4 Interface for motor cable 1 Power Cord 2 3 Tighten the strap Peel off sticker Tighten Up Screws (Optional) Insert cable through the strap D.Self-adhesive Cable Strap - 3 07 F.
STEP 5 RReorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which theorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which theReorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
STEP 6 The 'Child Lock' button is for height position lock and factory reset purpose.
STEP 7 Handset Instruction Functionality Button REMINDER button, to activate the " Long-Time Sitting Reminder " function UP Button, to lift the desk surface DOWN Button, to lower the desk surface LED Display Position 1, User saves the 1st Height Position Position 2, User saves the 2nd Height Position Position 3, User saves the 3rd Height Position Child Lock , to Lock/Unlock height position, and factory reset purpose. USB Wireless Charger Operation Guide Reset Process a.
Troubleshooting This list is used for checking and solving common faults and errors. The LED displays an error code with warning sound when problem occurs. In most cases, problem should be resolved by reconnecting cables and run a factory reset mode. If problem you encounter is not on the list below, please contact the manufacturer for assistance.
Attention ·Power supply: AC120V ± 10%, frequency 60HZ; ·Working environment: 32º - 1 0 4º F ; ·Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the connection line and keep the plug in a safe position. ·Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.