Specifications Max. Weight Capacity 110 lbs (50kg) Speed 25mm/s Input Voltage 120-240 V Min. Height 29.5" (749mm) Max. Height 47.2" (1200mm) Duty Cycle 10% (Working 2 minutes then stop 18 minutes) Certification FCC Accessory Package PLEASE NOTE: Check that you have received all components and hardware before assembling. If you are missing any parts, please contact us for replacement parts. A.3/4"Medium Machine Screw -8 D.6x14mm Screw - 2 E.----- - 4 H.Wrench - 1 B.
Diagram of Components 3 2 1 4 5 6 7 9 8 9 11 10 12 12
Parts PartsIncluded Included NO. Parts Qty NO.
STEP 1 2 L.Cam Lock - 6 1 Arrow Hole The arrow in the HIDDEN CAM must point toward the K.Cam Screw - 3 J.Wood Dowel - 6 4 2 1 L.Cam Lock - 16 3 J.Wood Dowel - 8 K.
STEP 2 C.9/16" Medium Wood Screw E.----- - 4 -8 4 2 1 3 F. 6x28mm Screw- 4 C.
STEP 3 G.8x10mm Screw-4 H.
STEP 4 Before installing part 10 , press the metal bar all the way down. 10 11 B.1/2"Small Machine Screw - 6 H.
STEP 5
STEP 6 40-60MM 2
STEP 7 9 9 C.9/16" Medium Wood Screw -8 B.1/2"Small Machine Screw - 4 H.
STEP 8 D.6x14mm Screw - 3 R.
STEP 9 12 12 A.3/4"Medium Machine Screw -8 H.
STEP 10 Interface for handset cable Power Cord Interface for motor cable
STEP 11 2 1 3 Tighten the strap Peel off sticker Tighten Up Screws (Optional) N.3/8" Small Wood Screw - 2 Insert cable through the strap O.
STEP 12 P.
STEP 13 The 'Child Lock' button is for height position lock and factory reset purpose. Factory reset is required for first time initialization Connect Power Cable to Power Adapter S.
Handset Instruction Functionality Button REMINDER button, to activate the " Long-Time Sitting Reminder " function UP Button, to lift the desk surface DOWN Button, to lower the desk surface LED Display Position 1, User saves the 1st Height Position Position 2, User saves the 2nd Height Position Position 3, User saves the 3rd Height Position Child Lock , to Lock/Unlock height position, and factory reset purpose. Operation Guide Reset Process a.
This list is used for checking and solving common faults and errors. The LED displays an error code with warning sound when problem occurs. In most cases, problem should be resolved by reconnecting cables and run a factory reset mode. If problem you encounter is not on the list below, please contact the manufacturer for assistance.
Attention ·Power supply: AC120V ± 10%, frequency 60HZ; ·Working environment: 32º - 1 0 4º F ; ·Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the connection line and keep the plug in a safe position. ·Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.