Instructions / Assembly
kovaproducts.com Rev. 0.1 | 2020.02
information.
CAUTION: Follow all lamp manufacturer’s warnings, recommendations and
restrictions for: driver type, burning position, mounting locations/methods,
replacement, and recycling.
CAUTION: Wearglovesandsafetyglassesatalltimeswhenremovingthexturefrom
the carton, installing, servicing, or performing maintenance.
CAUTION: Riskofburn.Disconnectpowerandallowthexturetocoolbefore
servicing or performing maintenance.
CAUTION: Avoiddirecteyeexposuretothelightsourcewhileitison.
CAUTION: Account for small parts and destroy packing material, as these may be
hazardous to children.
• Suitable for dry or damp locations.
• The green ground screw is in the proper location. Do not relocate.
• Specicationsanddimensionssubjecttochangewithoutnotice.
Pre-Installation
Tools Required (not included)
Gloves Safety goggles Electrical tape
Wire nut
General Wiring
LED DRIVER
Black (Line)
White (Neutral)
Green (Ground)
120-277v
Dimming wire
to 0-10v IEC
compliant control
Lead wire to
LED load
Purple (Dim+)
Grey (Dim-)
Blue (-)
Red (+)
Product Description
A
C
Packing List
Part Description Qty.
A Fixture 1
B Outlet/J-BoxCoverPlate 2
C Mounting Brackets 2
D Outlet/J-BoxCoverPlateScrews 4
E Mounting Bracket Screws 2
F Mounting Screw Drywall Anchors 2
G Installation Sheet 1
Before You Begin
WARNING: Ensure power is turned off at the circuit breaker.
1 Mount the Light Fixture
Surface Mounting
F
E
1
C
D
B
1. Use screws (E) to secure the
mountingbrackets(C)tothe
mounting surface (1).
2. Screwtheoutletboxcovers(B)
onto the back of the housing.
IMPORTANT: Different mounting screws may be needed if the mounting screws
provided are not adequate for the mounting suface.
Suspended Mounting
2
A
C
1
1. Clipthemountingbrackets(C)
to the slots on both ends of the
xture(A).
2. Attach v-hooks to the mounting
brackets(C).
3. Attach chain (2) to the v-hooks
and mounting surface (1).
IMPORTANT: V-hooks and suspension chains not included.
2 Connect the Electrical Wires
Black
White
Green (Ground Wire)
IMPORTANT: Donotallowthexturetohangfromthewires.
Surface Mounting
1. Holdthexturermly.
2. Connecttheblackxturewiretotheblacksupplywireusingawirenut.
3. Connectthewhitexturewiretothewhitesupplywireusingawirenut.
4. Connectthexturegroundwiretothesupplygroundwireusingawirenut.
5. Wrap all wire connections with electrical tape to ensure a secure connection.
6. Tuckallwiresbackintotheoutletbox.
7. Clipthelightxtureintothemountingbracketsonthemountingsurface.
Chain Suspended Mounting
1. Connectthesupplywirestothexturewiresthroughaexiblemetalconduit.
CAUTION: If house wiring does not include a ground wire, consult your local electrical
code for approved grounding methods.
Care and Maintenance
Wipethesurfaceofthexturewithawithaclean,drycloth.
Product and Warranty Information
For product and warranty information please visit kovaproducts.com.
Safety Information
WARNING: Topreventelectricalshock,turnpoweroffatthefuseboxbefore
installation and maintenance.
WARNING: Topreventwiringdamageorabrasion,donotexposewiringtoedgesof
sheetmetalorothersharpobjects.
WARNING: Riskofreorelectricshock.Installationofthissurfacemountassembly
requires a person familiar with the construction and operation of the
luminaires’selectricalsystemandthehazardinvolved.Ifnotqualied,do
notattemptinstallation.Contactaqualiedelectrician.
WARNING: Riskofreorelectricshock.Donotalter,relocate,orremovewiring,
lampholders, power supply, or any other electrical component.
WARNING: Not for emergency lighting.
WARNING: Installationshouldbeperformedbyaqualiedelectricianinaccordance
with the National Electrical code and relevant local codes.
WARNING: All wiring connections should be capped with UL approved wire
connectors.Connectxturetosupplywiresratedforaminimumof194°F
(90°C).Donotexceedmaximumwattagemarkedonluminaireslabel.The
xtureisintendedtobeconnectedtoaproperlyinstalledandgroundedUL
listedjunctionbox.
WARNING: Toreducetheriskofdeath,personalinjuryorpropertydamagefromre,
electric shock, falling parts, cuts/abrasions, and other hazards read all
warningsandinstructionsincludedwithandonthextureboxandall
xturelabels.
WARNING: Before installing, servicing, or performing routine maintenance upon this
equipment, follow these general precautions.
WARNING: Commercialinstallation,serviceandmaintenanceofluminairesshouldbe
performedbyaqualiedlicensedelectrician.
WARNING: Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
CAUTION: Verify that supply voltage is correct by comparing it with the luminaire label
INSTALL INSTRUCTIONS
Product
Dimmable LED Strip Light
KPN Model Number
K0000019875 / K0000019876 / K0000019877