USER'S MANUAL & rhs device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. ¥ Caution 1 Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment, (MO TES 1B 1.Function of the buttons 2.Icons description on LCD 3 Function selection and display in sequence 4. selection 5 Power ON/OFF selection 6.
FUNCTION OF THE BUTTONS Read button For reading message and setting conditions on LCD. Function button For selecting menu, changing digits, {unlocking messages and clearing individual message. FH Selection bunion For selecting Functions, moving and operating lamps. Badlands-World CONSIGNS DESCRIPTION ON LCD 8 0B BEREAVE ae WW Service area indication. Received message(s) locking indication. @ Automatic On/Off selection indication. ® Morning call indication.
CATION SELECTION AND DISPLAY IN SEQUENCE bd Sun «2:DEA *Current time(Starting stage) ’ v 3 display. CLERIC PERL | hd ° *All messages clearing Si Lent R tg selection display. *Vibration/Paging sound selection display. BET TIRE FP v ry *Time and a day of the week POWER OFF? selection display. *Power OFF selection display. 3. FUNCTION SELECTION AND DISPLAY IN SEQUENCE HAM On ° RUTH on # * Alarm ON * Automatic power ON selection display. selection display.
BEEP / MELODY SELECTION 1.An current time{Starting stage), push E> button one time. If you push buttonhole one time, "SILENT" will be displayed and vibration will be operated for a few seconds. If you push » button, vibration function will be selected and current time( Starting stage) will be displayed. 2.In the fig.A, if you push CE button two times, "BEEP " will be displayed on LCD and you can hear beep sound.
ill DPD mm. ®m peer”) Belay B ax » eee | BELLY 2 5.POWER ON/OFF SELECTION 1.In the current time{Starting stage), push (£2 button two times. 2. If you push
RRR FIVER POET OFF? OFF «2:00R |? 2 (SemdnazaRmcs) sun ie: ‘nor (Restrengthen ; & MESSAGE CHECKING (LOCK/UNLOCK / INDIVIDUAL CLEAR) 1.In current time{ Starting stage), if you push » button one time, received time, address and call type of the message will be displayed. 2.In the fig. A, if you push IL] button once more, the received message will be displayed and keep the » button pushing on, reading messages will be displayed continuously.
MESSAGE CHECKING (LOCK/UNLOCK INDIVIDUAL CLEAR) 3In the fig.B, if you push (ZED button one time, message will be locked and "§ * will be displayed. At this time, if you push Zed button for over two seconds continuously, message will be cleared and the next message will be displayed by pushing 1B button. 4.In the fig.C, if you pushed button once more, locking will be released and at the same time, normal messages will be stored.
7 ALL MESSAGES CLEAR (EXCEPT LOCKED MESSAGE) {In current time(Starting stage), push TE> button three times. 2.1n the fig. A, if you push
eR EES IR RARE 1.In current time{Starting stage), push FE button five times. 2.In the fig. A, if you push buttonwood one time, the fig.B will be displayed. At this time, you can change digits with Fed button and can adjust them with SES button by moving. After adjustment, if you push 13 button, alarm will be on and current time(Starting stage) will be displayed. (In power off or automatic power on/off, you can also do it.) 3.In the fig.
T O.AUTOMATIC POWER ON/OFF SELECTION 1.Int current time(Starting stage), push [FE button seven times, 2.1f you push attribution one time, selection condition will be automatic power on/off. 3.In the fig. B, you can change digits with FED button and ean amend them with buttonwood by moving. After amendment, if you push button, automatic power on/off condition will be selected and current time(Starting stage) will be displayed. Example : In case you want to select time like the fig.
T O.AUTOMATIC POWER ON/OFF SELECTION 1.Int current time(Starting stage), push [FE button seven times, 2.1f you push attribution one time, selection condition will be automatic power on/off. 3.In the fig. B, you can change digits with FED button and ean amend them with buttonwood by moving. After amendment, if you push button, automatic power on/off condition will be selected and current time(Starting stage) will be displayed. Example : In case you want to select time like the fig.
1 HEATHER MAIN DISPLAYS L.Low voltage alarming(Short alerting sound / vibration per 60 mind) —spleen replace battery to new one. (In low voltage, "LOW BATTERY" and time will be displayed in turn. When low battery is keeping on, 5 + automatically pager can't receive message. Il BATTEN The pager is not out of order and replace battery.) 2. When the same message is + locked in duplication, FE PERT "REPEAT" will be displaced. ¥ B= 3, Duplicate message receiving.
12. HOW TO REPLACE BATTERY 1.During replacing battery, all unlocked messages should be cleared. So replace battery after "LOCKING" necessary messages, 2.In low voltage, alert sound (Short alert sound/vibration per one hour) will come out and "LOW BATTERY" will be shown on LCD. In this moment, replace the battery at once. : 3. When you replace battery, push the battery locking tab back side of the pager to arrow direction as fig. A. 4.