Safety Information

TIPS FOR USE
KoreTrak Gen2 is equiped with a glass touch screen and capacitive function button located at the bottom of the screen Short press the Home buttom to return to previous screen
Long press the Home button for 3 seconds to return to the main interface
The touch screen could be affected by conductive media such as water from shower or rain. Make sure the button interface is clean and dry when using.
INSTRUCTION MANUAL
The device sensors require a close skin contact on your wrist to get an accurate reading. Hold KoreTrak Gen2 in place on the outside of your wrist. Tighten the wristband until you feel it has a firm grip around your wrist, but not so tight that it cuts off circulation, then
fasten the pin-and-tuck strap. To remove the device, pin-and-tuck strap.
FASTENING THE WRISTBAND: 1. 2. 3. 4.
CHARGING THE BATTERY:
CONNECTING KORETRAK GEN2 TO YOUR SMARTPHONE: You will have to pair your KoreTrak Gen2 to your smartphone
manually the first time you use it. After that, it will connect
automatically anytime your device is within range. Your
KoreTrak Gen2 can store off-line data for up to 7 days before
syncing with your smartphone.
Long press function button to turned on the device.
If the device cannot be turned on, it is possible that t
he
battery might be low. Please charge it on a 5V rated USB
power supply for up to 3-5 minutes. Please refer to the
charging instruction on page 2.
Open the KoreTrak App on your smartphone.
Hold KoreTrak Gen2 near your smartphone and go to Device page, click “Pair Device”. Choose corresponding Bluetooth name “KoreTrak Gen2”. Connection completed.
• • •
• •
USING KORETRAK GEN2:
Download the KoreTrak App onto your iOS or Android
smartphone by scanning the QR codes below, or by
searching “KoreTrak” in the App Store or Google Play Store.
Device requirements: iOS 8.0 and above; Android 4.4 and
above.
INSTALLING THE KORETRAK APP:
Android
iOS
• •
TO TURN ON KORETRAK PRO:
HOME SCREEN The home screen displays the time, date, weather, health data
and other essential information.
To change the home screen display style, long press the home screen for 3 seconds to open Cover Style Selection. Swipe left and right to select cover design.
To cycle through modes (ie. Health data, workouts, messages and more), scroll up and down Swipe left to enter function modes
MODES
1. 2.
To prevent personal injury or damage to your KoreTrak Gen2. read the following guidelines carefully to ensure proper usage:
1. Avoid exposing KoreTrak Gen2 to chemicals, sudden impact and extreme heat. 2. When cleaning KoreTrak Gen2, do not use harsh solvents such as alcohol, benzine, acetone or thinner.
3. Do not attempt to disassemble KoreTrak Gen2 or remove the battery. 4. If you feel any discomfort while wearing KoreTrak Gen2, loosen the wristband and discontinue using. 5. This is not a medical diagnostic device.
6. Do not use in steamy environment such as sauna or hot spring. Not for swimming or diving.
IMPORTANT SAFETY INFORMATION
Warning: This device is not a toy. Keep away from children.
1. 2. 3. 4.
01 02
05
04
TIPS FOR USE
If the KoreTrak Gen2 screen does not light up immediately after being plugged in properly, the battery may be completely drained. Let it charge for at least 5 minutes. The screen should light back up within this time. If KoreTrak Gen2 still does not light up or charge after all these steps, please contact customer support.
03
06 07 08 09
FRONT SIDE
Dimensions: 9 x 9 cm CMYK & double side printing 30538 KoreTrak Gen2 IM
SKIN TEMPERATURE Records skin temp measurement.
BLOOD OXYGEN MONITOR Measures oxygen levels in your blood.
HEART RATE MONITOR Measures your heart rate in beats per
minute.
WORKOUT
Measures your performance during specific
exercises. Swipe left to select an activity (Walk, Run, Cycling,Gym, Hiking, Basketball, Soccer, Tennis, Yoga, Dance, Badminton). Select Target Setting (Distance, Duration, Calories or Open Goal) and begin workout.
Friendly Reminder The unit of measurement can be changed from °F to °C in your App.
The metal temperature sensor will need direct skin contact in order to
take an accurate reading. Water, sand or dirt between your wrist and
watch will result in inaccurate readings.
The skin temperature measurement can take up to 30 seconds to reach a stabilized measurement.
HEALTH DATA Measures your daily steps, distance, calories and activity minutes.
RELAX Set timed goal to relax. The device will lead you in a breathing exercise. SLEEP Measures your total sleep duration. It also breaks down how many hours were deep sleep, light sleep, REM sleep or awake.
HR HEALTH Measures the variation in time between each heartbeat.
Attach the bottom of the watch to the magnetic pogo pin charging dongle (see diagram to right.)
1.
KoreTrak Gen2 is equipped with a magnetic pogo pin charging dongle.
To charge, plug the dongle into a 5V 1A USB-A port (not included) or a wall socket with a USB adapter. Make sure your power source is at least 5V. It might take up to 3-5 minutes for the watch to be responsive.
2.
Allow KoreTrak Gen2 to charge for up to 2 hours or until the
battery indicator on the home screen is full.
3.
When completely charged, remove the device from charging dongle.
4.
KoreTrak Gen2 requires 20 seconds to get a heart rate or blood oxygen reading. For optimal performance, it is recommended to wear KoreTrak Gen2 on your left wrist. To keep KoreTrak Gen2 clean, wipe it down with a damp cloth once a week or after physical activities. To maintain consistent sensor reading, it is
recommended to clean the sensor at the back of the watch after use. Dirt, lotion, grease or excessive water and sweat will affect sensor
performance.
• • • •
TIPS FOR USE:
Sensor
Left Hand