User's Manual

Kontakt.io PUCK Beacon

User Manual

Introduction and Maintenance

PUCK Beacon works constantly and broadcasts Bluetooth signal

constantly. Device is ready to be used in an ‘out of the box’ manner.

Device is ready to perform since programmed and assembled.

In case of possible malfunctioning users are advised to contact

technical support to get assistance and replacement of devices not

working and still under warranty. Contact to support:

support@kontakt.io

The manufacturer and device name are mentioned on the original box

that device arrives in.

Size of the device: Φ50x 20.5mm; 50mm diameter, 20.5mm height

Installation

PUCK beacon can be installed using any type of adhesives materials.

In the box there is installation tape added to the product. For

installation on glass surface automotive class glue is required.

PAGE 1
Kontakt.io PUCK Beacon User Manual Introduction and Maintenance PUCK Beacon works constantly and broadcasts Bluetooth signal constantly. Device is ready to be used in an ‘out of the box’ manner. Device is ready to perform since programmed and assembled. In case of possible malfunctioning users are advised to contact technical support to get assistance and replacement of devices not working and still under warranty. Contact to support: support@kontakt.
PAGE 2
Features - Technology in device: Bluetooth 5.0 compliant - Accelerometer - three-axis accelerometer MEMS, 1Hz to 5.3kHz ODR WARNING PUCK Beacon contains electronic elements and batteries (2x ER14250) which should be properly disposed. If beacon needs to be utilised, please contact the manufacturer technical support first. FCC Caution This device complies with part 15 of the FCC Rules.
PAGE 3
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver.