User's Manual

European HQ:

Kontakt.io Inc., Poland

Stoczniowców 3, 30-709

Kraków, Poland

NIP UE No (VAT) PL9452176914

kontakt@kontakt.io

Heavy Duty Beacon HD18-3

User Manual

Turning on and maintenance

Kontakt.io Heavy Duty Beacons HD18-3 are maintenance-free devices. They work constantly

and they are ready to be used in ‘out of the box’ manner. There is no need to turn the beacon on

or activate it in any way. They are ready to perform once programmed and assembled. In case of

possible malfunction, their users are advised to contact technical support to receive proper

replacements (email: support@kontakt.io). Replacement policy also applies to performance

faults caused by low battery after certain operation time. The name of the device and

manufacturer are mentioned on the beacons’ label.

Installation

Kontakt.io Heavy Duty Beacon HD18-3 can be fixed on the wall by using proper screws by

means of mounting holes. A user needs to make sure to adhere a Beacon to the mounting surface

firmly. Alternatively, one can use double-side adhesive tape and stick it to a flat and smooth

surface.

WARNING

Opening beacons or fixing them is strictly forbidden.

Kontakt.io HD18-3 contain electronic elements and batteries which should be properly disposed.

If one ever needs to utilize beacons, it is advisable to contact the manufacturer first.

Switching the original battery with one of a different type might cause a risk of explosion.

PAGE 1
Heavy Duty Beacon HD18-3 User Manual Turning on and maintenance Kontakt.io Heavy Duty Beacons HD18-3 are maintenance-free devices. They work constantly and they are ready to be used in ‘out of the box’ manner. There is no need to turn the beacon on or activate it in any way. They are ready to perform once programmed and assembled. In case of possible malfunction, their users are advised to contact technical support to receive proper replacements (email: support@kontakt.io).
PAGE 2
IC Caution: RSS-Gen Issue 5 April 2018"&"CNR-Gen 5e April 2018: - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: Le présentappareilestconf orme aux CNR d' Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 3
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.