Notes on this Manual » Copying or reproduction of all or part of the contents of this manual without MONICA MINOLTA Sen Sings permission is strictly prohibited » The contents of this manual ure subject to change without prior notice. + Every effort has beer made in the preparation of this manual to ensure the accuracy of its contents. However, should you have any questions or find any errors, please contact a MONICA MINOLTA SENSING-authorized service facility.
» Transshipment disinterestedness md sound 10 comply with the nadirs for s Class 8 digital Revives pursuant to Pats of the Peo Rules! These Tins are designed for provide reasonable protection against hangnail interference ina residential installation: This equipment generates, sass and can radiate radio fre ency synergy and, instrumentalist and used encase discordance with the inst ructions. ‘may came harmful interference to radio communications.
Safety Symbols The following symbolize need fn this manual to prevent accidents which maleficent as rise of incontinence of the instr Denotes a sentence regarding a safety warming or note, Read the sentence carefully to ensure safe and comet vse. Denotes a prohibited operation. The operation must never been performed. Denotes an instruction. The instruction must be strictly adhered to. Denotes a prohibited operation, Never disassemble the instrument. Denotes an instruction.
Safety Precautions Retirement correct Use of this firmament, chad the following point carefully and adhere to then. After you have read this manual, keep it in a safe place where it can be referred to anytime a question arises. /\ WARNING {Failure to adhere to the following points may result in death or seniors injury.) O Do not use the instrument m places where flammable or combustible gases (gasoline etc.) are present. Doing so may cause a fire.
E-2 Introduction Thank you for purchasing the CM-F00dEU04, hiss precise; lightweight and compact speeriophatcivisrer developed for coral and differences measurement of reflective objective colors in various industries, Packing materials of the product Be sure to keep all packing materials used for shipping the product {cardboard box, cushioning material, plastic bags, etc}. The is a precision measuring instrument.
Plover: Soiree He Taken prove Sara SL OER On hews the COVETOUSNESS BE HOE a GE THECNMETOOAG00 Gi BY covered from edition the AT Adapter LATASHA) 6P AAS lain e vr kike eyeball die eT tae able Hall elliptic NOE; Howe er Ia Vou Can of USe ile AU ApH to Chide shiitake. metal-hydroxide rechargeable batteries installed tn the instrument. Always use the AC adapter supplied as a standard accessory {AC-A305} and connect outlet of the sated voltage and frequency.
E-4 The White: Calibration Plate attached fo the White: Calibration Cap may become discolored if feb exposed to Fight. Therefore, make sure taf the cap de verier when 1 fv nod fn use so laid White Liberalization Plies or papyrus to mane light; “The Target Masking discolor i then let exposed lobs When hey aerie Hume, thicken i aide PCE 1G Pr even Eos 16 TEI RTS Protect Hh Tron Sor alien és wid das Be sure to keep all packing materials {cardboard box, cushioning material, plastic bags, effete.
Contents Safety Precautions E:1 Introduction. E-2 Notes on Use L2 Motes on Storage £3 Notes on Cleaning, . B-4 Disposal Method 1-4 Conventions E-8 Chapter 1 Before Using the Instrument. Accessories Standard Accessories Optional Accessories Names and Functions of Parts Preparation . ‘White Calibration Cap CM-A177 Attaching/Removing a Target Mask | Cleaning Parts Attaching Wrist Strap fo the Instrument Inserting the Batteries Connecting the AC Adapter Turning Power ON/OFF System Diagram ..
TECHIE SETH BILLY orocorvmcesrmosomencsxerassonensrs sees mess enc ers perch reds xs sear semaphore se raeememmesaeexeanarsenens. -JAG Setting the Display Tangible R66 Setting the Date and Time ET Setting this Power Eve Mode Be Ui 1) Initialization... . E-72 Chapter 3 Measurement Measurement E74 Displaying the Measurement Re: . B75 Measured Data... . E78 Pass/Fail Judgment . E76 Color Difference Graph . ET Spectral Reluctance Graph . E77 Switching the Display Contents of the Measurement Results | .
E-8 Conventions This manual describes how to safely operate the using a inspection procedure to proforma segmented: * Page layout Symbols used in this mammal are explained below. *Note that the page shown in the frustration is for explanatory purposes only, and snot an actual page from this Manuel, (Mesmerism Gives sensual Information and additional explanations.
Accessories Standard-am optional accessories are available with the instrument. Standard Accessories Make sure that all the following items we present. ‘White Calibration Cap MEALTIME (w/ white calibration date CD-R) Target Mask Used to switch the {lamination area (specimen measuring port size) according to the specimen.
Optional Accessories Accessories 1 You may purchase the following accessories if necessary. Era Calibration Box CM-A182 Used to perform zero calibration. Color Data Solitaire SpectraMagic™ NX CM S100w Used to operate the instrument from a PC for data processing and file management. Hard Case CM-A176 Used to store the instrument together with accessories. *Po not use the hard case for transportation purposes. Target Mask ¢ 8 mm (with glass) CM-A183 Used to measure viscous or damp specimens.
Names and Functions of Parts b> LCD screen Displays setting items, measurement results and messages. Control panel Used to switch screens or select/detenmmine/save setting items. For details, refer to page E-23 “Control Buttoned”. AC adapter terminal When using the supplied AC adapter (CM-A305), connect the adapters plug to this terminal. USE connection terminal Used to connect the instrument to a PC with the supplied USB cable (IF-A17).
Names and Functions of Parts 1 8 Measurement area selector Used to change the lens position according to the iN measurement area. SAY MAY Mer The CM-600d does not have this switch. 9 Battery chamber cover BB The cover of the battery chamber. Four AA-size batteries must be set in the battery chamber with the correct polarity alignment. 10 Battery chamber cover button Press this button to open or close the battery chamber cover, 11 READY Lamp Ready to measure (and folly charged) when green.
E-14 Preparation White Calibration Cap CM-A177 The instrument is shipped with a White Calibration Cap and white calibration data CD-R. The White Calibration Cap has the structure shown below. 1 should be attached to the instrument. before white calibration. Ng ~The White Calibration Cap sst be weal in combination with the transient that bears he same pairing number. When the White Calibration Cap is not in se, invert it so that the Wii Calibration Plate is uot posed i ambient ght or dust.
Preparation 1 Attaching/Removing a Target Mask The must be used with a Target Mask conforming to the selected lens position and measurement condition To attach/remove a Target Mask, follow the procedure given below.
i Preparation Cleaning Parts This section explains how to clean the White Calibration Cap. Target Mask and the inside of the integrating sphere. ‘White Calibration Cap « When the White Calibration Plate becomes dirty, gently wipe the dirt off with soft dry cloth. If the dirt ix diffident to remove, wipe it off with 4 cloth dampened with commercially available lens cleaning solution. Then remove the solution with a cloth dampened with water, and leave the paled to dry.
Preparation 1 Attaching Wrist Strap to the Instrument ‘When measuring by hand, attach Wrist Strap and put your arm through Wrist Strap to prevent dropping of the instrument. [Procedure] 1 Pass one end of Wrist Strap through the strap holder of the instrument. 2 Pass other end of Wrist Strap through the ring, and pass the strap that passed through the strap holder through the ring too. 3 Pass one end of Wrist Strap that passed through the ring through the buckle.
i Preparation Inserting the Batteries For the the supplied AC adapter {AC-A305) or four AA-size batteries (alkaline or nickel-metal-hydroxide rechargeable batteries) inst be used as a power supply. Use either the AC adapter or batteries according to your application. EN Do not use manganese batteries. if you are not going fo wse fee CM-T0GL6000 for more than two weeks, the batteries must be removed.
Preparation 1 Connecting the AC Adapter [Meme When the external onion terminal is used for data communication or printing, more power will be required. In this case, it is recommended to use the AT adapter {AC-A305) rather than batteries, supply AC power to the instrument, always use the AC adapter {ACA 308) appliance with the instrument, © Buford connecting or disconcerting the AC adapter jack or plug, make sure tho fee instrument 5 toned OFF.
i Preparation Turning Power ON/OFF [Operating Procedure] Turning power ON Slide the Power switch to the position. The power will be timed ON {energized}. 3 [Operating Procedure] Turning power OFF 1 Slide the Power switch to the position. The power will be tamed OFF. Power Save Function The features a power save function which activates the power save mode when none of the measuring and control buttons is operated for a specified period of time.
Items You Must Know Initial Settings of the ‘When the instrument is toned ON, the screen will appear automatically in English. For normal measurement, you do not need to change the initial settings Tt is recommended that you check the date and specify the power save mode in the
Items You Must Know 1 Status Icons Status Leon Description (Status) Meaning Measurement area (Measurement i en area selector setting) MAVIS ’ Ea * The CM-700d shows either the MAY or SAY icon.
i Items You Must Know Example of assigned functions For example, when the screen shows the guidance 7 3: fidelity || Save || Hijack | | the [SAMPLE], [SAVES ar SEL] and [TARGET] buttons are assigned withe Edit, Save and 5 Back functions respectively. In this manual, when the button Be Jude name and the function assigned to the button are different. the Er Graph Spec button ame and function are described as “the [ SAMPLE] (Edit) Be facade wo) or button” or “[ TARGET] (Back) button”.
Flow of Measurement E-26 BE Optional settings B Basic procedure Turing Power ON/OFF (page E-20) J Setting the Display Language (page E-88} * Perform this step if necessary such as after initialization. Registering Conditions (Cod) {page E-56) * Perform this step if Altaching/Remuoving & Target Mask {page E-15) necessary according’ tithe Bl measurement condition & * Perform this step only if necessary, Zero Calibration (page E-27) such as after initialization.
Calibration Zero Calibration Since the stores the data of the zero calibration performed af the factory, it Is unnecessary to repeat the zero calibration every time yon turn ON the instrument. However, if the measurement conditions change greatly, or if you use the optional dust cover set or Target Mask ¢ 8 mun {with glass), you need to perform zero calibration before white calibration. Missy The effects of stray light inside the measuring part {Le.
i Calibration 3 Use the 4 button of the cross key to move the cursor to “Zero Cal.” Sadat Sean ees Gal Keaton we Eg 26 05-20: 31 Oe Feather ite Cal GINSBERG 1124 52 4 Direct the specimen measuring port to midair. «+ Dino direct the specimen measuring port toward a light source {including illumination such as a florescent lamp), * Keep the species measuring port more than 1m away from any reflective items (hands, desks, walls fc.
Calibration 1 ‘White Calibration ‘White calibration must be performed prior to start of measurement after the power is turned ON for the first time after purchase af the current settings. When white calibration finishes, 3B is displayed. Nee white calibration is completed, measurement is possible without white calibration when the instrument is muted OM the next time. However, the measurement result is not acclimate.
i Calibration 4 E-30 Properly attach the White Calibration Cap, which has the same pairing number as the instrument. Make sure that (Ready to measure} is displayed or Ready lamp is green, and then press the measuring button, h White White calibration will be performed, " The Xe lamp flashes five times for each SCT and SCE @ measurement Raring white calibration, the screen shows the number of flashes performed.
Calibration 1 User Calibration You can perform calibration by using your own reference plate and calibration data instead of the white calibration data. The calibration data for veer calibration can be specified by connecting the instrument to a PC and using the optional Color Data software © Spectacles ™ NX. Selectman whether to nse the user calibration data measurement on the
Condition Setting The requires condition settings (display and assessment conditions} before measurement can be started. More To configure condition settings, select “Dis. Cod” {display conditions} or “Meas. Cod” {measurement conditions} from the resorption serene to open an appropriate screen.
Condition Setting 1 + The Dis. Condo screen shows the current settings. Inanimate EE ele ji LE omit lor Space = XYZ Attenuation E200 Baal lor ride Wi (E3133 3 After you set the display conditions, press the [TARGET] (Back) button to return to the
i Condition Setting Dis. Type Specify items to be displayed us measurement results. [Setting Procedure] start the procedure from the dispel. Cod» screen. 1 Use the A or V button of the cross key to move the cursor to “Dis. Type.” and then press the [LIFESAVER] button. The «Dis. Types screen is displayed. Space x YZ Adequate ion dE2000 Ba Go lor 1 node WE CE3T3-730 2 Use the A or ¥ button of the cross key to TET eer eve the cursor to the desired item. rls T 7 (Meany Dis.
Condition Setting 1 Ns The pestles for “Difference”, ibs. & DUE" amd *Graph Di” will be displayed only when the target color has been specified. Press the [SELVES] button. The selection is confirmed and the screen returns to the dispel, Cod» screen, Insignia If yon press the [TARGET] (Back) button without pressing the LIFESAVER] button, yon retain fo the HB dispel. Cod» screen with owt changing the setting.
E-36 i “condition Setting Color Space Select the color space to be need, [Setting Procedure] start the procedure from the dispel. Cod» screen. 1 Use the A or 7 button of the cross key to nova the cursor to “Color Space” and then press the [SELVES] button. The «Color Spaces screen is displayed. Use the A or ¥ button of the cross key to move the cursor to the desired item.
Equation Select the color difference formula to be used. Condition Setting 1 [Setting Procedure] start the procedure from the dispel. Cod» screen. 1 Use the A or 7 button of the cross key to motivate cursor to “Equation” and then press the [SELVES] button. ‘The
Observer Condition Setting 1 Select the observer angle: 2¢ or 10%, [Setting Procedure] start the procedure from the dispel. Cod» screen. 1 Use the A or 7 button of the cross key to move the cursor to “Observer” and then press the [SELVES] button. ‘The screen is displayed. Use the A or ¥ button of the cross key to nova the cursor to the desired item. Settings 02°: 27 observer {(CTESIPHON 1) 210°: 10° observer (CIE1964} Press the [SELVES] button.
i “condition Setting Predominant 1 Select the imminent used to measure cliometric data, [Setting Procedure] start the procedure from the dispel. Cod» screen. 1 E-40 Use the A or 7 button of the cross key to move the cursor to “ruminant 1” and then press the [SELVES] button. The Illuminati 1» screen is displayed. Use the A or ¥ button of the cross key to nova the cursor to the desired item.
Predominant 2 Condition Setting 1 Select the secondary ruminant used for MI (metamorphism index) calculation, etc, [Setting Procedure] start the procedure from the dispel. Cod» screen. 1 Use the A or 7 button of the cross key to move the cursor to “ruminant 2” and then press the [SELVES] button. The Illuminati 2» screen is displayed. Use the A or ¥ button of the cross key to nova the cursor to the desired item. Settings O The setting values are the same as those for “Ruminant 17 and “Monet.
i Condition Setting Setting the Measurement Conditions To set measurement conditions, select “Meas. Cod” from the
i “condition Setting ‘Wait Time Specify the delay between the press of the measuring button and the flash of the lamp [Setting Procedure] start the procedure from the nation of the cross key to move the cursor to the digit on fhe left or right.
Condition Setting 1 Auto Averaging (Auto Ave.) Specify the number of measurements for auto averaging. [Setting Procedure] start the procedure from the
i “condition Setting Manual Averaging (Manual Ave.) Specify the number of measurements for manual averaging. [Setting Procedure] start the procedure from the screen is displayed. Use the 4 or ¥ button of the cross key to specify a value. « Use the <§ or D> button of the cross key to move the cursor to the digit on the left or right.
Color Difference Target Color Data Operation Setting a Target Color To measure the color difference between two specimens, the color of one of the specimens must be set ag the target color. The van store np to 1,000 target colors, ‘When using the instrument alone, measure a target specimen by following the procedure below and set HB the result as the target color. Mem oF Target colors are stored with sating numbers from 0001 to 100¢ being assigned.
i Color Difference Target Color Data Operation 3 Place the specimen measuring port on the specimen. 4 Make sure that & {Ready to measure} is displayed or Ready lamp is green, and then press the measuring button, The specimen is measured and the result is displayed on the BOOTEE, Nz If you selected a number to wikis target color data has already been set, a message is displayed Io confirm overwriting.
Color Difference Target Color Data Operation 1 [Setting Procedure] 1 From the screen, press the [MENU] button. The
i “color Difference Target Color Data Operation Delete Delete the target color data Nas When fhe data is protected, you carat select “Delete” on fie Mennen screen. [Setting Procedure] start the procedure from the
Color Difference Target Color Data Operation 1 ERGO 8CH 1355 Gina Use the A or ¥ button of the cross key to move the cursor to the desired item. Lic displayed at the top of the screen, yon can nse the «J or [> button of the cross key to change the combination of the secular component mode and Ruminant used for the screen display.
i Color Difference Target Color Data Operation Edit Name Meme the target color data. [Setting Procedure] start the procedure from the
Color Difference Target Color Data Operation 1 Setting the List (List) Specify the column displayed for each target color No. in the lst. [Setting Procedure] start the procedure from the