CryptoKona S CryptoKona S Plus User Guide 1.
CryptoKona User Guide • Product Specs • Master Wallet Creation • BLE Connection (for the 1st time) • Master Wallet Recovery • Receiving CryptoKona Coin • Sending CryptoKona Coin
CryptoKona User Guide Plus specification H/W S/W Display 1.43” Secure IC MCU Size (mm) Functional Temperature Connection Type SAMSUNG S3FTXXX Cortex-M4 85.5mm x 54mm x 0.84mm Contents Wireless Frequency Certification COS CryptoKona, Charge Cradle, USB Cable BLE 4.1 KC, CE, FCC, TELEC Java Card applet Java card 3.0.4, GlobalPlatform 2.2 CryptoKona secure applet Mnemonic 12~24 Supported HD wallet BIP 32, BIP43, BIP44, BIP49, ETC.
CryptoKona Master Wallet Creation 1 Press Select button to turn on the card Press Select button again to begin 2 Select ‘create’ and Press the Select 3 a new Master Wallet. • Card On/Off Button Select button to create If recovery is needed, use the • Activating functions and selections button to select ‘recover’.
CryptoKona Master Wallet Creation 7 Use the button to select the length of words to be saved on the mnemonic and press the Select button to confirm the length. Please write down the selected length and the mnemonic phrase for safekeeping. After doing so, use the Select button to proceed to selecting the phrase which matches the selected length. Press the Select Tip • Card On/Off Button Select • Activating functions and selections button to confirm.
CryptoKona BLE Connection (for the 1st time) 1 Status bar PASS KEY 498565 Please input the 6 digit PASS KEY displayed on the card onto the CryptoKona App when attempting to establish BLE connection for the first time.
CryptoKona Master Wallet Recovery 1 Press Select button to turn on the card Press Select button again to begin 2 3 If recovery is needed, use the button to select ‘recover’. • Card On/Off Button Select Select ‘create’ and Press the Select • Activating functions and selections button to create a new Master Wallet.
Receiving CryptoKona Coin 1 2 3 1 Select the receiving account. Tip - Press [ ] to open the menu. Press [Add Account] within the menu window. 2 Select the [Receive] button located in the bottom-left of the account details screen. 3 The address and QR code of the receiving account will be shown. Press [Copy] to copy the address or select [Share] to share the account information. It is also possible for the sending party to use the QR code to directly scan and quickly input the address.
Sending CryptoKona Coin (1/2) 1 2 3 1 Select the sending account. 2 Select the [Send] button located in the bottom-right of the account details screen. 3 Please input the cryptocurrency account address and fund amount to be sent within the [Send] screen. After inputting the needed information, select the desired [Network Fee].
Sending CryptoKona Coin (2/2) 4 5 6 4 Please select the desired Network fee option shown. [Standard] is recommended for faster transfer speed. 5 The [Send] button will be selectable after inputting the receiving address, amount, and Network fee. Please check the information shown before pressing the [Send] button. 6 The final confirmation pop-up will be exposed. Please check the information (address and amount) before pressing the button to select [Okay] on the BLE connected card.
Charger method A red light turn on Charger in put the Cards
Class B FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
THANK YOU
