KH DVD Player Operating Instructions IB_KH6777_EN 1 23.09.
The eBench KH DVD Player incorporates a technology for copyright protection that is protected by process claims of certain US patents and/or other intellectual ownership rights of the Macrovision Corporation and other Copyright owners. The use of this technology for copyright protection must be approved by Macrovision Corporation and is exclusively intended for non-commercial use in the private area; all other uses require the explicit approval of the Macrovision Corporation.
Index 1. Technical Data Video output Audio output Digital audio output 6 6 6 6 2. Use and function 6 3. Scope of the delivery 6 4. Controls, displays and connections ... 4.1. ... on the DVD player 4.2. … at the back of the DVD player 4.3. ... on the remote control 7 7 7 8 5. Setting up the DVD Player/Safety instructions 9 6. Remote control 6.1. Loading the batteries 6.2. Using the remote control 6.3. Exchanging batteries 9 9 9 10 7. Connecting the DVD Player to a television 7.1.
12. Starting the DVD Player 22 13. Playing DVDs, VCDs or S-VCDs 13.1. Functions while a DVD, VCD or S-VCD is being played Stopping playback (Pause) Terminating playback (Stop) ... with Resume Function ...
15. Playing CD-Rs/CD-RWs with MP3 or WMA Files 15.1. Functions when playing a CD-R/CD-RW with MP3 or WMA files Stopping playback (Pause) Ending playback (Stop) ... with Resume function ... without Resume function Jumping to the beginning of a title (Skip) Direct title selection Entering the title with the numeral buttons Selecting a title by way of the search function (Search) Repeating sequences (A – B) Select Play mode Programmed playback (Program) 40 42 42 42 42 42 42 42 42 42 43 43 44 16.
1. Technical Data Mains: Input: TV standard: Operating temperature: Moisture: Weight: Dimensions: alternating current 230 V ~50 Hz 25 watt PAL/NTSC +5 ~ +35°C 5 ~ 90 % (no condensation) < 3.
4. Controls, displays and connections ... .. ... on the DVD player 1 2 3 4 5 6 7 8 9 10 11 12 13 Disc drawer Display “Power“ button Headphones socket 1 Headphones socket 2 Volume control for headphones socket 1 Volume control for headphones socket 2 “Open/Close“ button “Play“ button “Pause“ button “Stop“ button “Skip back“ button “Skip forward“ button 1 3 7 6 5 4 2 8 9 10 11 12 13 ..
.. ...
5. Setting up the DVD Player/Safety instructions Warning! Overheating can cause irreparable damage to the DVD Player, and there is the risk of firel 1 Carefully remove the DVD Player and the supplied accessories from the packaging. Please note: 2 Peel off the protection foils on the front mirror panel and DVD drawer panel. No liability/warranty is accepted for damage to theDVD Player as a result of the following … 3 Place the DVD Player on a level, non-slip base.
.. Exchanging batteries Proceed as follows to connect the DVD Player to a television with a SCART cable … The batteries must be exchanged when remote controlled operation of the DVD Player is disrupted or does not function at all. Always exchange both batteries together to re-establish full power. Please note: 2 Spent batteries must not be disposed of in the domestic waste. Hand in spent batteries at collecting or special waste-disposal points, or return them to the place where they were purchased.
… then the DVD Player can be connected to the television via the video input (the so-called “Composite Video“ connection). Proceed as follows for this purpose … 2 4 6 2 1 4 6 3 5 1 Insert the S-Video cable into the “S-Video” socket at the back of the DVD Player. 2 Insert the S-Video cable in the S-Video socket on the television. 1 3 5 3 Insert the white plug of the supplied audio/video chinch cable in the “FL” chinch socket at the back of the DVD Player.
• so-called “YUV“ signals (half frame) and as • so-called “YPbPr“ signals (full frame/Progressive Scan). 2 Insert the red plug at the other end of the audio/video chinch cable in the corresponding Component Video INsocket “Pr/Cr” on the television. 3 Insert the white plug of the audio/video cable in the “Pb/Cb” chinch socket at the back of the DVD Player.
1 Insert the jack plug of the headphones in the “1” headphones socket on the front panel of the DVD Player. 2 Set the required volume with the “1” inscribed volume control alongside the headphones sockets. 2 4 3 If required, a second pair of headphones can be connected to the “2” inscribed headphones socket. The volume of the second headphones is variable independent of the first headphones with the “2” inscribed headphones socket to the right of the headphones sockets. 10.
The necessary cables for the subsequently described connection method are available from your local dealer. Check the operating instructions for the given audio component whether it can be connected to a DVD Player … 2 • • with a coaxial cable, or with an optical cable. If both are possible then you are free to choose which connecting method you prefer.
1 First insert the power cable plug of the DVD Player into a mains socket. 2 To switch on the DVD Player press the “Power” button on the front of the DVD Player. If the DVD Player has already been switch on and is in standby mode, then press the “Standby” button on the remote control once to turn on the DVD Player. 2 “Load” will then start to flash on the display on the front of the DVD Player, which is then followed by “NoDisc”.
6 Sub-items can be selected in the sub-menu with the control buttons and , and called by pressing the “OK” button. The selectable options available in the selected menu sub-item are then displayed. 7 It is now possible to run through the different selectable options of a menu sub-item by repeatedly pressing the “OK” button on the remote control. The available options relating to the current menu item or menu sub-item will be displayed with each depression of the “OK” button.
• • If you select the “Auto” option, then the sub-titles (if they exist) will be displayed on the screen in the first available language on the DVD/VCD/S-VCD when the film is played. If the “Off” option is selected, then subtitles will not be displayed, other than you press the “Subtitle” button while the film is being played. ➧ For this subject please refer to the Chapter 13.1. “Subtitle fade-in/fade-out” ..
instructions for the given television, or turn to the Glossary in the instructions to find the explanation under the headword “Television Standard”. 13 Press the control button OSD menu bar. three times to return to the .. Audio settings ➧ For this subject please refer to Chapter 19. “Glossary/ 1 Press the control button menu item. Index”. Setting Video Output 9 Press the control button item “Video Output” once to select the menu sub- 10 Conform by pressing the “OK” button once.
confirm. The options available for the sub-item “Digital Output” will be displayed on the television screen: Setting speaker sizes Before changing the speaker settings: Raw Stereo-Downmix Set “Raw“ if a multi-channel, digital audio component – e.g. a Dolby Digital or DTS receiver, or a 5.1-channel surround-sound system – is connected to the DVD Player via an optical or coaxial cable.
Language Video Audio More Aud Parental 8 Select the “Center“ option for the center speaker channel of the audio component by pressing the control button once. 9 Press the “OK” button to select from the available settings: • Please note: 3 First select the “Language” menu item. Then select the “Audio” menu item by pressing the control button on the remote control twice. 4 Confirm the choice by pressing the “OK” button on the remote control once.
• “On“ if a subwoofer is connected to the audio component. • “Off“ to turn off the audio channel for the subwoofer or when no subwoofer has been connected to the audio component. Please note: If you have selected the “Small” setting in the “Front” option, then the “Off” setting cannot be selected for the subwoofer. If you have selected the “Off” setting for the subwoofer, then “Large” is automatically selected in the “Center” option.
If the “OK” button is depressed once again at –6 dB, then the maximum selectable sound level of 6 dB will once again be displayed. 12.
Playing DVDs, VCDs or S-VCDs KH 6777 IB_KH6777_EN 23 23.09.
13. Playing DVDs, VCDs or S-VCDs DVD/VCD/S-VCD If no country code is printed on the sleeve of a DVD/ VCD/S-VCD … Proceed in the following manner to play a DVD/VCD/S-VCD on the DVD Player … • but rather the symbol , then the DVD/VCD/SVCD can be played on the DVD Player, or 1 Switch on the television to which the DVD Player is connected. • the given DVD/VCD/S-VCD cannot by played on the DVD Player. To check, simply by trying to play the DVD.
Calling DVD-Menu (Menu) and for the play mode 3 The number of the currently playing title Please note: 4 The time hitherto played of the current DVD/VCD/S-VCD in hours, minutes and seconds This function may not be available on all DVDs! The symbol is shown in the television screen when an attempt is made to carry out a function that is not available. 5 The current audio playback setting – in this example: Dolby Digital-Symbol (depending on the loaded DVD) ..
DVD/VCD/S-VCD If the VCD/S-VCD loaded in the DVD-Player features PBC, then it must be activated so that the menu can be faded in. Enter the chapter number with the numeral buttons Proceed in the following manner to activate PBC … Please note: 1 Press during playback, or when playback has been stopped, the “Mode” button on the remote control once.
• Three times for four-fold search speed; “ x4” is displayed on the television screen. Example: To start playback 1 hour, 5 minutes and 30 seconds after the beginning of the film, press one after the other the numeral keys … • Four times for eight-fold search speed; “ x8” is displayedon the television screen. • Five times for twenty-fold search speed; “ played on the television screen. • • • „0“, „1“ for 1 hours; „0“, „5“ for 5 minutes; „3“, „0“ for 30 seconds 2 For Fast Search Rewind press the “F.
DVD/VCD/S-VCD • Once for half the playback speed; “ 1/2” is displayed on the television screen. • Twice for the second enlargement stage: “ 2” is displayed on the television screen. • Twice for one-fourth of the playback speed; “ 1/4” is displayed on the television screen. • Three times for the third enlargement stage; “ 3” is displayed on the television screen. • Three times for one sixth of the playback speed; “ 1/6” is displayed on the television screen.
• Please note: This function may not be available on all DVDs/VCDs/ S-VCDs! If you try to carry out a function that is not available, then the symbol is displayed on the television screen. With some films on a DVD/VCD/S-VCD it is possible to select another playback language by depressing the “Audio” button on the remote control. The first available playback language is turned on when the “Audio” button is depressed for the first time.
DVD/VCD/S-VCD 1 In the program menu the first entry field under storage place 1 is automatically marked. Press, one after the other, the “0” button and “1” button to enter the title number 01. • The remaining time until the end of the currently playing chapter in hours, seconds and minutes • The type of loaded disc (DVD, VCD/S-VCD) 2 Press the control button once to change to the second entry field under program storage place 1.
Repeating sequences (A – B) Repeat play Any sequence within a chapter of the currently loaded DVD/ VCD/S-VCD can be repeatedly played with this function. The “Repeat Playback” function … Proceed in the following manner … ... with DVDs either titles or chapters of the loaded DVD can be repeated. 1 Press during playback the “A-B” key on the remote control as soon as the desired beginning of the sequence is played; “Rep A –“ will be displayed on the television screen. ...
6 Select the desired bookmark with the control keys and . DVD/VCD/S-VCD 7 Confirm the choice by pressing the “OK” key once. Playback of the selected chapter now commences automatically. IB_KH6777_EN KH 6777 32 23.09.
Playing audio-CDs KH 6777 IB_KH6777_EN 33 23.09.
14. Playing audio-CDs Proceed in the following manner to play audio-CDs on the DVD Player … 1 Switch on the television to which the DVD Player is connected. 6 The contents of the audio-CD will then be loaded; this will take several seconds. “Load” will flash on the display on the front of the DVD Player, and “Loading” will be displayed on the television screen. 2 Ensure that the DVD Player has been switched on and is ready for operation.
To terminate playback of a title on the loaded audio-CD, press the “Stop” button on the front of the DVD Player or on the remote control once. ... with Resume function If playback of a title on the loaded audio-CD has been terminated by pressing the “Stop” button once, then the DVD Player will automatically store the point at which playback was terminated (“Resume” function”). The television screen will display “Stop [Play to Continue]”.
Selecting titles by their time position • Four times for the eight-fold search speed; “ played on the television screen. Proceed in the following manner to select titles on the audio-CD by entering its time position … • Five times for the twenty-fold search speed; “ displayed on the television screen. x20” is For fast search in rewind press the “F.Rwd” during playback … button 1 Press the “Search” button on the remote control twice during playback or stopped playback.
3 To clear an entry in one of the input fields, select the corresponding input field with the control buttons and press the “CLR” button once. The display returns to “– –“. To clear the entries in all input fields, select the “Clear all” option underneath the input fields with the control but, and then press the “OK” button once. tons 4 Having programmed all the required titles, select the “Play program” option under the input fields with the control , and then press the “OK” button once.
• Select “All” to continue repeating the entire CD until repeat play is switched off, or playback is terminated by pressing the “Stop” button twice. 4 To switch off repeat play, press the “Mode” button during playback, and select in “Play Mode” the “Off” option in the “Repeat” menu item by pressing the “OK” button. Repeat playback is switched off when the “Mode” button is pressed once again. Repeating sequences (A – B) Any sequence of the currently played title can be repeated with this function.
Playing CD-Rs/CD-RWs with MP3 or WMA Files KH 6777 IB_KH6777_EN 39 23.09.
15. Playing CD-Rs/CD-RWs with MP3 or WMA Files Proceed in the following manner to play a CD-R/CD-RW with MP3 or WMA files on the DVD Player … 1 Switch on the television to which the DVD Player is connected. 6 The contents of the CD-R/CD-RW is then being loaded; this can take several seconds. “Load” will flash on the display on the front of the DVD Player, and “Loading” will be displayed on the television screen. 2 Ensure that the DVD Player has been switched on and is operational.
Please continue reading directly at Step 10. • When there are folders: Detailed information concerning the currently played title is faded in to the left, underneath the CD-R menu, e.g. the name of the “Artist”, the name of the “Album”, the “Year” of the recording, etc.
.. Functions when playing a CD-R/CD-RW with MP or WMA files The following functions of the DVD Player can be used while a CD-R/CD-RW with MP3 or WMA files is being played … Stopping playback (Pause) Proceed in the following manner to stop a title on the loaded CD-R/ CD-RW … 1 Press once the “Pause/Step” button on the front of the DVD Player or on the remote control while the title is being played.
If there are folders: By entering the title number via the search function it is possible to select the title within the currently selected sub-folder for playback. Repeating sequences (A – B) Any sequence of the currently played title can be repeated with this function. Proceed in the following manner … Disc Scan This play mode is ideal for gaining a rapid survey of all titles on a newly loaded CD-R/CD-RW. If there are no folders: The titles on the CD-R/CD-RW are played consecutively for a few seconds.
within the current sub-folder for playback. You can decide the sequence in which the titles are played. located in the list of the titles of the previously selected sub-folder. ➧ To operate the “Programmed Playback” function please 4 Proceed as follows to playback titles in the set mode … refer to Chapter “Programmed Playback (Program)”. Single Track • If there are no folders: The currently selected title is played once again.
8 Within the programmed titles it is then possible to jump to the beginning of the next title or back to the previous title by pressing the “Skip” or “Skip” buttons on the front of the DVD Player or on the remote control. 6 To clear programmed playback, press during playback the “Stop” button on the front of the DVD Player or on the remote control twice. 9 To clear programmed playback press twice during playback, the “Stop” button on the front of the DVD Player or on the remote control.
IB_KH6777_EN KH 6777 46 23.09.
Playback JPEG-CDs KH 6777 IB_KH6777_EN 47 23.09.
16. Playback JPEG-CDs Proceed as follows to playback CD-Rs/CD-RWs with pictures in JPEG format with the DVD Player … 1 Switch on the television to which the DVD Player is connected. 2 Ensure that the DVD Player has been switched on and is operational. If the television, the DVD Player and any other units that may be connected (e.g.
• On the left-hand side the main folder (“Root”) on the loaded CD-R/CD-RW; this is also shown if pictures are not stored in folders on the loaded CD-R/CD-RW. • On the right-hand side all pictures of the loaded CD-R/ CD-RW (here referred to as “Picture 1” and “Picture 2”). 11 Press the control buttons and on the remote control to change between the individual pictures of the list; press the “OK” button once to select a picture for display. The selected picture will then be immediately displayed.
Please note: the display on the front of the DVD Player, while “ “ will be displayed on the television screen. Picture turning does not function when picture display is in Pause mode. Terminating picture display (Stop) To terminate the display of a picture, press the “Stop” button on the front of the DVD Player, or on the remote control, once. ...
The following Play Modes can be selected to display JPEG pictures on CD-Rs/CD-RWs: Folder Normal If there are no folders: All pictures are shown consecutively. Picture display ends with the last picture on the CD-R/CD-RW. If there are folders: All pictures in the current sub-folder are shown consecutively. Picture display ends with the last picture of the current sub-folder. Folder Wiederholung If there are no folders: All pictures on the CD-R/CD-RW are shown consecutively.
If there are folders: preset “Folder Normal” mode has then been selected (see fit 2). • If there are no folders: or CD-R MENU ROOT Press the “Play” button once to start picture display with the first picture in the current sub-folder ROOT 0 Picture 1 1 Picture 2 2 • Press the “OK” button once to start picture display with the currently selected picture in the current sub-folder.
General Functions of the DVD Player KH 6777 IB_KH6777_EN 53 23.09.
17. General Functions of the DVD Player Setting the sound volume Press the “Vol+” button on the remote control to increase the sound volume during playback of DVDs, VCDs/S-VCDs, audio CDs and CD-Rs/CD-RWs with MP3 or WMA files, or the “Vol -” button to diminish the volume. The change in volume between the “0” (sound OFF) and “16” (maximum volume) is indicated on the television screen.
• … on some DVDs/VCDs/S-VCDs with a printed parent guidance rating, the child lock will not indicate any function in connection with the set age release rating. Selecting your own password You can replace the works set password “8888” with your own four-digit password composed of the numerals 0 to 9. For this purpose proceed in the following manner … 1 Stop a disc that may be currently playing in the DVD Player by pressing the “Stop” button on the front of the DVD Player, or on the remote control, once.
tings. In this case the previous speaker settings for Stereo Downmix in the OSD menu, “Audio” menu item, “Size” sub-item, must be returned to the previous settings: • • • • Front: LARGE Center: Off Rear: Off Subwoofer: Off ➧ For this subject please refer to chapter 11.
Faults and how they can be remedied KH 6777 IB_KH6777_EN 57 23.09.
18. Faults and how they can be remedied Fault Possible cause/Remedy ➔ The display is blank/ DVD Player does not indicate any function even though it has been switched on A Check that the power cable has been correctly plugged into a mains socket. B Check whether the mains socket is conducting power by connecting another electrical appliance to the same mains socket. C Switch off the DVD Player by pressing the “Power” button on the front panel, and wait for ten seconds.
A Check whether the television and/or the DVD Player have been switched to mute mode. ➔ No sound B Check whether all connecting cables between the DVD Player and connected audio components have been firmly inserted into the correct sockets. C Check whether the settings on the OSD menu match the manner of connection of the audio components with the DVD Player. ➧ For this subject please refer to Chapter 10. “Connecting Audio Components to the DVD Player”.
Contact our service partner in your vicinity if … • When the listed functional faults cannot be remedied in the described manner! • When faults other than those listed arise! Warning! NEVER open the case of the DVD Player! It does not contain any parts that can be repaired by the user. The warranty becomes null and void if the case has been opened.
Glossary/Index KH 6777 IB_KH6777_EN 61 23.09.
19. Glossary/Index What are DVDs, VCDs and S-VCDs? What are SCART, S-Video, Composite-Video Progressive Scan and YUV? Scart DVD stands for “Digital Versatile Disc”. They are used to store audio and video data. They are available in the formats 8 cm and 12 cm (diameter) DVDs offer a significantly higher storage capacity than CD-Rs/CD-RWs – a playback duration of the stored audio and video data of up to eight hours.
This contrasts with the “Progressive Scan” format where all lines are shown each time, i.e. 60 frames or full pictures per second. This increases the over-all quality of the picture so that still pictures and text appear to be significantly sharper. Decoder The sound on DVDs featuring home cinema surround sound is stored in a coded form on the DVD. There are different coding formats for different purposes, e.g. AC-3 to reproduce Dolby Digital surround sound. To reproduce coded sound the playback units (e.
MP3-CD IB_KH6777_EN Folder MP3 file KH 6777 64 23.09.
IB_KH6777_EN 65 23.09.2003, 0:57 Uhr Rocketpeople Manipulative Kommunikation www.rocketpeople.
Kompernaß Handelsgesellschaft mbH • Burgstraße • D- Bochum, Germany www.kompernass.com IB_KH6777_EN 66 23.09.