IB_KH5001_UK 09.07.2007 15:37 Uhr Seite 1 UK KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.
IB_KH5001_UK 09.07.
IB_KH5001_UK 09.07.
IB_KH5001_UK 09.07.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 3 e-bench KH 5001 Analogue Comfort Telephone with hands-free function e-bench KH 5001 Table of contents 1. Intended Use 4 2. Technical Data 4 3. Package contents 4 4. Safety Instructions 4 5. Operating elements 5 6. Connecting 6 a) b) c) d) 6 6 6 6 Connecting the receiver Connecting to the PSTN line Inserting the batteries Changing the batteries 7. Wall Mounting 6 8.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 4 e-bench KH 5001 Telephone KH5001 Memory 1. Intended Use Target dialling memory: 10 Phone book: 32 entries Incoming call list: 65 entries Dialled list: 8 entries Single button emergency call: 1 number Power requirement for memory preservation: 3 x 1,5 V (UM4/AAA) The product is intended: • for connecting to PABX phone lines and for directly connecting to the analogue Public Switching Telephone Network (PSTN) lines. • private use.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 5 e-bench KH 5001 • • – Do not allow individuals (including children) to use the appliance whose physical, sensorial or mental abilities or lack of experience and knowledge hinder their safe usage of it if they have not previously been supervised or instructed in its correct usage. Tell children about the appliance and its potential dangers so that they do not play with it. Disconnect the appliance from the TAE socket in the event of a thunderstorm.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 6 e-bench KH 5001 2^ 2& 2* 2( Calling Phone Book / Saving settings TAE connecting cord Battery compartment Adjusting Ring tone volume Used batteries should not be disposed of in the household waste. Return these to your retailer or to an appropriate collection site for disposal. 6. Connecting 7.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 7 e-bench KH 5001 t Press the button, till the desired language appears in the display window. button, to save 2^ Press the the selected setting. If this function is not presented automatically – or, if you wish to once again call this function at a later point of time: This can be done through the programming mode as described under Section 8. Setting the Phone Book size alone is enough to achieve this.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 8 e-bench KH 5001 2@ b) Adjusting the display contrast If you have called the programming mode, ... t 2@ t 2@ press the button repeatedly till the text "SET LCD CONTRAST" is displayed. press the button to change set value according to your personal preference. press the button again to confirm your choice and move on to another setting option.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 9 e-bench KH 5001 e) Setting the dial tone code Is your telephone connected to a PABX? If not, you can skip this item. Ask your service provider or refer to the user manual for the PABX as to how long the Flash pulse should be. The factory setting is 100 ms and for most of the appliances this is sufficient. button repeatedly till 2@ Press the the text "FLASH TIME" is displayed: to change the setting.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 10 e-bench KH 5001 a i For saving the changes and to terminate the function, press the button twice. When you press the button once the text "LINE IN USE" is displayed: If you press it again, the phone is again ready for operation. Using the switch "RING L/H" 2( additionally the ringer volume can be set to 1 (L) and the previously set volume (H). – i Release the , button if the desired dialling mode is displayed.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 11 e-bench KH 5001 c) Adjusting the receiver volume 1* Using the slider on the receiver, you can adjust the receiver volume. There are two levels (MIN / MAX) available here. y With the receiver on the hook press the button , to set the ringing volume to one of four levels. d) Call waiting and transferring You can put your incoming or out-going calls on call waiting mode, for example, for enquiries or transferring a call to other users of PABX.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 12 e-bench KH 5001 In the case of the function described above, the phone will dial immediately. You need not pick up the receiver first or press the button. The Local Code can be prefixed from the memory functions (Phone Book, Dialled list and Target dial memory).
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 13 e-bench KH 5001 t use the button to select the function "EDIT ". • When the text "PLS INPUT NAME" is displayed, you can use the key pad to enter letters: – Press the required digit button repeatedly till the letter under the digit is displayed in the display window (e.g. press the button 8 three-times for the letter "V"). – If you do not enter anything for more than 1 second, the display moves on the next digit.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 14 e-bench KH 5001 2! o) Deleting Phone Book entry If you see the Phone Book entry in the display window as described under m), .... 2# hold the button pressed till the text "ERASED" is displayed. t You can change the Phone Book entries by deleting them as described above and by saving a new entry. 11.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 15 e-bench KH 5001 s t s t s Hold the button pressed when the receiver is on hook, till the text "SET ALARM TIME" is displayed and the digit for hours starts blinking. press the buttons to change the set digit. press the button again till the digit for minutes starts blinking. press the buttons to change the set digit. Finally, press the button again to confirm your settings.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 16 e-bench KH 5001 To delete a single entry in the display... 2# 2# If malfunctions do occur in spite of previously fault free operation, you may consider using the "Reset" function which, however, would mean making the settings all over again. If this still does not solve the problem, contact the customer service and get the telephone set checked. Press the button briefly To delete the entire list... Hold the button pressed for more than 3 seconds.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 17 e-bench KH 5001 Battery disposal! Batteries may not be disposed of with normal domestic waste. All consumers are statutorily obliged to dispose of batteries at the collection point in their community/district or with the original supplier. The purpose of this obligation is to ensure that batteries can be disposed of in an environmentally-friendly manner. Only dispose of batteries when they are fully discharged. 15.
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 18 e-bench KH 5001 18.