CV_KH1191_E4905_LB6.qxd 11.07.2008 9:30 Uhr Seite 1 6 ELECTRIC PASTRY PRESS KH 1191 ELECTRIC PASTRY PRESS Operating instructions KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.
CV_KH1191_E4905_LB6.qxd 11.07.
IB_KH1191_E4905_LB6 07.07.
IB_KH1191_E4905_LB6 07.07.2008 14:48 Uhr Seite 2 ELECTRIC PASTRY PRESS KH 1191 Tips for safety: • In cases of danger, immediately remove the electrical plug from the socket. • Never use the appliance for purposes other than those for which it was designed. • Do not use the appliance outdoors. • Always be attentive! Always pay attention to what you are doing and act with common sense. Never use the appliance when you are distracted or don’t feel well.
IB_KH1191_E4905_LB6 07.07.2008 14:48 Uhr Seite 3 CO Time The CO Time (Continuous Operation Time) details how long an appliance can be operated without the motor overheat-ing and becoming damaged. After the appliance has run for this period it must be switched off until the motor has cooled itself down. Inserting the threaded rod with pusher 1. Place the end of the threaded rod t in the motor unit r. Ensure that the pins inside the motor unit r engage with the guide rails on the threaded rod t. 2.
IB_KH1191_E4905_LB6 07.07.2008 14:48 Uhr Seite 4 Note: Assembling the nozzles When the pusher y and container u are Fill the container u at the most to the MAX marking. Process the pastry straight away. assembled: 1. Place the nozzle adaptor i into the lock ring s. The thread must point outwards. 2. Place the lock ring s with the nozzle adaptor i onto the container u. 3. Turn the lock ring s in the direction of the arrow until it engages . 4. Select a nozzle o. 5.
IB_KH1191_E4905_LB6 07.07.2008 14:48 Uhr Seite 5 Adding decorations Refilling with pastry or decorative mixture Tips: 1. Place the direction switch q onto the arrow pointing downwards . 2. Press and hold the start button w until the pusher y has returned itself to the MAX marking. • Use the nozzles o exclusively for shaping fluid-like substances, such as whipped cream. • The decoration substance must have a soft and creamy consistency, otherwise it will block the nozzle o.
IB_KH1191_E4905_LB6 07.07.2008 14:48 Uhr Seite 6 Disassembly of the Biscuit Shaper • With some pastries and motif discs it is better to work quickly, with others, better to work slowly. • Simply use trial and error until you can produce biscuits that match your expectations. • If you want to use various motif discs and nozzles, first of all use all of the currently filled pastry or decorative substance. Change the motif discs and nozzles when you refill the Biscuit Shaper. 1.
IB_KH1191_E4905_LB6 07.07.2008 14:48 Uhr Seite 7 Disposal DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel.: 0870/787-6177 Fax: 0870/787-6168 e-mail: support.uk@kompernass.com Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations.
IB_KH1191_E4905_LB6 07.07.2008 14:48 Uhr Seite 8 Recipes Biscuits 2 You can process commercially available readymade pastry with the Biscuit Shaper.