Replacement Part List
POLARIS SADDLE STORAGE GEN 2
Installation Instructions
Stock No.:
4413
Please read and understand these instructions completely before installation to avoid injury to yourself or damage to the
vehic
le
or
accessory
.
Dealer:
These instructions contain important information
for
future reference and must be given
to
the customer
at
time
of
purchase
or
upon completion
of installation.
Parts List:
ITEM
PART
NAME
DESCRIPTION
QT
Y
.
1
Saddle
Box
UTV Saddle Storage
Box
1
2
KXP Plunger
KXP UTV Plunger
2
A
Image
B
Image C
1) Turn Saddle Storage box upside down and locate two
dimples as shown in Image A. Drill dimples with 5/16” drill
bit.
2) Assemble KXP plungers into Saddle Storage box as
shown in Image B. Only snug handles tight, if compressed
too much the plunger will not fit in the bed rail.
3) Place saddle storage into desired location on bed rail as
shown in Image C. Tighten plunger handle to secure. Do
Not Over Tighten – secure fastening is possible without
over stressing components!
Failure to follow these installation instructions completely may void any warrantable components and result
in
property damage or personal injury. NEVER operate or transport UTV with unsecured cargo. NEVER
use this product
or any part of
it
for pulling or
towing.
For additional assistance, please contact our customer service department at:
Kolpin Outdoors,
Inc. | 2 0 5
N. Depot
Street | F o x
Lake,
WI
53933
| 1. 8 7 7 . 9 5 6 . 5 7 4 6
| customerservice@kolpin.com
Image A
Image B
Saddle Storage
Wall
Image C