Installation Guide

1473500-2
Record your model number:
Noter le numéro de modèle:
Anote su número de modelo:
CAUTION: Risk of personal injury
. Do not install where the product
might be used as a grab bar or support bar.
IMPORTANT! When possible, secure the product to a wall stud.
1A. Drill Bits: 1/8", 1/4", 5/16"
2A. Recommended Tissue Holder Location: H = 8" (203 mm) to 12" (305 mm),
W = 6" (152 mm)
3A. Some Models: Loosen the setscrew and remove the wall plate.
4A. Two-Post Accessory: Verify that “X” on the template matches your
product dimension.
6A. For installation to a stud, drill 1/8" holes. For installation to drywall, drill
5/16" holes. For installation to ceramic tile, drill 1/4" holes.
7A. Installation Between Studs: Use the provided pin to install the drywall
anchors.
8A. Installation to Concrete or Tile: Install ceramic anchors.
Need help? Contact our Customer Care Center.
• USA/Canada: 1-800-4KOHLER (1-800-456-4537), Mexico: 001-800-456-4537
• For service parts, visit
kohler.com/serviceparts.
• For care and cleaning, visit kohler.com/clean.
This product is cov
ered under the KOHLER
®
Faucet Lifetime Limited
Warranty, found at
kohler.com/warranty. For a hardcopy of w
arranty terms,
contact the Customer Care Center.
ATTENTION : Risque de blessures. Ne pas installer ce produit aux
emplacements où il pourrait être utilisé comme barre d'appui ou barre
de support.
IMPORTANT! Lorsque possible, xer le produit sur un poteau mural.
1A. Mèches : 1/8 po, 1/4 po, 5/16 po
2A. Emplacement recommandé pour le distributeur de papier : H = 8 po
(203 mm) à 12 po (305 mm), l = 6 po (152 mm)
3A. Certains modèles : Desserrer la vis d'arrêt et retirer la plaque murale.
4A. Accessoire pour deux montants : Vérier que le « X » sur le modèle
correspond à la dimension du produit en question.
1
A
2
W
A
H
3
A
4
X
A
X
5 6
A
1473500-2-B
1 Kohler Co.