For:ko02585 Printed on:Mon, Feb 1, 1999 11:10:50 Document:085984_2_aa__ Last saved on:Thu, Dec 17, 1998 11:29:51
INSTALLATION INSTRUCTIONS TOILET VENT KIT IMPORTANT SAFEGUARDS When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE DANGER: Risk of electrical shock. To reduce the risk of electrical shock: Connect AC adapter only to a properly-grounded, grounding-type receptacle which is protected by a Ground-Fault Circuit-Interrupter (GFCI).
WARNING: Do not use in-tank cleaners. Products containing chlorine (calcium hypochlorite) can seriously damage this product as well as the other fittings in your toilet. Kohler Company shall not be responsible or liable for any damage caused by the use of cleaners containing chlorine. Electrical service requirements: 120 VAC, 15 A, 60 Hz (circuit protected by a Class A GFCI). The power requirement for this vented toilet kit is ? W at 12 VDC. The kit has an 8’ electrical cord and AC adapter.
Remove and discard the existing refill tube from the float valve. Position the snorkel assembly over the overflow tube, and hang the snorkel assembly on the back wall of the tank. Adjust the snorkel assembly from side-to-side and front-to-back to prevent interference with the trip lever linkage and float mechanism. Insert the replacement refill tube into the hole at the end of the snorkel assembly. Connect the refill tube to the float valve and to the overflow tube.
85984-2-AA (-) 4 Kohler Co.