Kathryn Toilet Seat Installation Instructions

ManualsBrandsKohler ManualsBathroom Remodel & Bathroom FixturesRevival Elongated Toilet Seat

kohler.com 1 1007299-2-J

Care and Cleaning

Nut

Bolts

Caps

Toilet Seat

Mounting Holes

Wrench

Seat

Gasket

Metal Nut

Gasket

Metal Washer

Tools Needed:

INSTALLATION GUIDE

TOILET SEAT

K-4615, K-4617, K-4622, K-4665,

K-4701, K-4755, K-4756

 Snap open the two hinged lids, or caps, that cover the seat bolt holes.

Slip the metal washers on the bolts, and fit the bolts through the hinges

from the top. Fit the rubber or foam gaskets on the bolts.

 Position the seat on the toilet so the bolts fit through the toilet seat-mount

holes.

Install the Toilet Seat

Clean the outside surface of your toilet seat with mild soap, such as liquid

dish soap and warm water. Wipe the entire surface completely dry with a

clean soft cloth. Do not use any abrasive cleaners, as they will scratch and

dull the surface. Avoid any detergents, disinfectants, or cleaning products

in aerosol cans. Avoid contact with abrasive chemicals and cosmetics,

such as fingernail polish and aftershave, as they may damage the finish of

your toilet seat.

 If the toilet seat-mount holes do not have pre-installed metal nuts,

loosely thread the nuts on the bolts.

 Tighten the bolts from the top, holding the nuts if necessary. Center

the seat as needed.

 Snap the hinged lids, or caps, closed.

CAUT ION: Risk of product damage. Do not overtighten the bolts.

Hand tighten the bolts if the toilet is equipped with pre-installed

metal nuts.

Summary of content (8 pages)

PAGE 1
TOILET SEAT K-4615, K-4617, K-4622, K-4665, K-4701, K-4755, K-4756 INSTALLATION GUIDE Caps Bolts Tools Needed: Seat Metal Washer Gasket Wrench Gasket Metal Nut Nut Toilet Seat Mounting Holes Install the Toilet Seat Snap open the two hinged lids, or caps, that cover the seat bolt holes. Slip the metal washers on the bolts, and fit the bolts through the hinges from the top. Fit the rubber or foam gaskets on the bolts.
PAGE 2
One-Year Limited Warranty — USA and Canada KOHLER® plumbing fixtures, faucets and fittings are warranted to be free of defects in material and workmanship for one year from date of installation. Kohler Co. will, at its election, repair, replace or make appropriate adjustment where Kohler Co. inspection discloses any such defects occurring in normal usage within one year after installation. Kohler Co. is not responsible for removal or installation costs. To obtain warranty service, contact Kohler Co.
PAGE 3
One-Year Warranty — Mexico KOHLER CO. It is recommended that at the time of purchase, you verify that all accessories and components are complete in this package. This Kohler product is warranted to be free of defects in material and workmanship for one (1) year from the date of purchase as shown on the invoice or receipt. 1. Kohler Co. will only service its commercialized products through its authorized distributors. 2. To obtain warranty service, please present the invoice and corresponding warranty. 3.
PAGE 4
SIÈGE DE W.C. K-4615, K-4617, K-4622, K-4665, K-4701, K-4755, K-4756 GUIDE D’INSTALLATION Capuchons Boulons Outils nécessaires: Siège Rondelle métallique Joint Clé Joint Écrou métallique Écrou Orifices de fixation du siège du W.C. Installer le siège du W.C. Soulever pour ouvrir les deux couvercles à charnières qui couvrent les orifices des boulons du siège. Enfiler les rondelles métalliques sur les boulons et insérer les boulons à travers les trous des charnières.
PAGE 5
désinfectants, ou produits nettoyants en aérosol. Éviter le contact avec des produits chimiques abrasifs et cosmétiques, tels que vernis à ongles, lotions après rasage, car ils pourraient endommager la finition du siège de toilette. Garantie limitée d’un an — pour les É.-U. et le Canada Les robinets, appareils sanitaires et accessoires Kohler® sont garantis contre tout défaut matériel et de fabrication pour un an à partir de la date d’installation. Kohler Co.
PAGE 6
ASIENTO DE INODORO K-4615, K-4617, K-4622, K-4665, K-4701, K-4755, K-4756 GUÍA DE INSTALACIÓN Tapas Pernos Herramientas necesarias: Asiento Arandela de metal Empaque Llave Empaque Tuerca de metal Tuerca Orificios de fijación del asiento de inodoro Instale el asiento del inodoro Abra de golpe las dos cubiertas o tapas abisagradas que cubren los orificios de los pernos del asiento. Deslice las arandelas de metal en los pernos y, por arriba, encaje los pernos en las bisagras.
PAGE 7
productos de limpieza en botes de aerosol. Evite el contacto con productos químicos y cosméticos abrasivos, tales como el esmalte de uñas o la loción para después del afeitado, pues pueden dañar el acabado de su asiento de inodoro. Garantía limitada de un año — Estados Unidos y Canadá Se garantiza que los productos de plomería, accesorios y la grifería de KOHLER® están libres de defectos de material y mano de obra por un año a partir de la fecha de instalación. Kohler Co.
PAGE 8
Garantía de un año — México KOHLER CO. Al adquirir el producto, se recomienda verificar que todos los accesorios y componentes contenidos en la caja estén completos. Kohler Co. garantiza que el material y la mano de obra de este producto está libre de defectos, por un (1) año, a partir de la fecha de compra que aparece en la factura o recibo. 1. Kohler Co. prestará servicio únicamente a los productos comercializados a través de sus distribuidores autorizados. 2.