Dimensions Guide

Features

•

Two 110v GFCI Outlets for powering or charging appliances.

•

On-Off switch on face of unit for easy control.

•

Can be installed in the back of the drawer without reducing

drawer extension

•

Fits all Tailored Vanity Collection drawers (except split-top

drawer).

•

Plug and play design allows unit to be installed as an accessory

in drawer and plugged into GFCI protected outlet - no hardwiring

into the home neccessary.

Codes/Standards

EPA TSCA Title VI

CARB P2

KOHLER

One-Year Limited Warranty

See website for detailed warranty information.

Available Color/Finishes

Color tiles intended for reference only.

DescriptionCodeColor

BlackCA3

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

9-28-2018 15:55

Tailored

Vanity Collection

In-drawer Electrical Outlet

K-99566

PAGE 1
Tailored® Vanity Collection In-drawer Electrical Outlet K-99566 Features • • • • • Two 110v GFCI Outlets for powering or charging appliances. On-Off switch on face of unit for easy control. Can be installed in the back of the drawer without reducing drawer extension Fits all Tailored Vanity Collection drawers (except split-top drawer). Plug and play design allows unit to be installed as an accessory in drawer and plugged into GFCI protected outlet - no hardwiring into the home neccessary.
PAGE 2
Tailored® Vanity Collection In-drawer Electrical Outlet K-99566 5" Required Electrical Service One circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device (RCD). 120 V, 15 A Technical Information All product dimensions are nominal. Notes Install this product according to the installation guide. Power cord is 72" (1829 mm) in length. Provide a grounded electrical outlet within close proximity to the electrical accessory.