Specification Sheet

Features

•

For use with steam generators between 18 and 30 kilowatts.

•

Allows steam generator to be controlled with DTV+ controller.

•

Adjustable time and temperature settings between 90 and 125

degrees Fahrenheit.

•

Includes two steam heads, temperature sensor, and adapter.

•

20-minute safety shutoff.

•

Aromatherapy reservoir on steam heads.

•

Requires DTV+ shower components (sold separately).

Material

•

KOHLER finishes resist corrosion and tarnish.

Loose component/s: Terminator, Dual Connector, Thermistor

Harness, DTV harness, 16" crossover cable, 10" Straight Cable,

6' Straight Cable, and Steamhead assembly (2).

Codes/Standards

None Applicable

KOHLER

Electronic Faucets, Valves,

and Controls - Five-Year Limited

Warranty

See website for detailed warranty information.

Available Color/Finishes

Color tiles intended for reference only.

DescriptionCodeColor

Polished ChromeCP

Vibrant® Polished NickelSN

Vibrant® Brushed NickelBN

Vibrant® Brushed BronzeBV

Oil-Rubbed Bronze2BZ

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

12-20-2016 06:05

Invigoration

™

DTV+ Tandem Steam Adapter Kit

K-5549-K1

PAGE 1
Invigoration™ DTV+ Tandem Steam Adapter Kit K-5549-K1 Features • • • • • • • For use with steam generators between 18 and 30 kilowatts. Allows steam generator to be controlled with DTV+ controller. Adjustable time and temperature settings between 90 and 125 degrees Fahrenheit. Includes two steam heads, temperature sensor, and adapter. 20-minute safety shutoff. Aromatherapy reservoir on steam heads. Requires DTV+ shower components (sold separately).
PAGE 2
Invigoration™ DTV+ Tandem Steam Adapter Kit K-5549-K1 Ø 3" (76 mm) Technical Information All product dimensions are nominal. Notes Install this product according to the installation guide. CAUTION: Risk of scalding. Do not locate the steam head near a seat or bench, as the steam head is hot during operation and may scald the user if touched. The temperature sensor should be mounted on the wall opposite the steam head. The steam head should be located as far from the seating area as possible.