Installation Guide

Fig. #1
9”
(22.9cm)
MIN.
27”
(68.6cm)
MIN.
8”
(20.3cm)
MIN.
6”
(15.2cm)
MAX.
ADA CLEARANCE, SELF-RIMMING ONLY
3-1/2”
(8.9cm)
34”
(86.4cm)
24” (61cm)
***10”
(25.4cm)
(T)
3/8” COLD
1-1/4” OUTLET
(S)
C
L OF FITTING*
3/8” HOT
ADA DRAIN OUTLET
***10”
(25.4cm)
17-1/2” (44.5cm) D.
10-3/4”
(27.3cm)
1-1/4” (3.2cm)
**3”
(7.6cm)
6”
(15.2cm)
4” (10.2cm)
1-1/2”
(3.8cm)
4” (10.2cm)
1010430-2-A
Español, Página 9
Français, Page 17

SPUN GLASS VESSELS
SELF-RIMMING AND
ABOVE-COUNTER LAVATORIES
K-2276
BEFORE YOU BEGIN
NOTES
 Use these instructions for both self-rimming, and
above-counter installations. Follow only the
instructions that apply to your installation.
 This lavatory gives you the opportunity to be
creative and flexible with the installation.
 You can choose between a wall-mount or
countertop faucet installation, depending upon the
setting and styling you desire. We recommend a
wall-mount faucet.
 Prior to installation, unpack the new lavatory and
carefully inspect it for damage. Return the lavatory
to its protective carton until you are ready to install
it.
 During installation, store the lavatory in the
protective carton whenever possible.
 Never stand or store the lavatory on the drain
surface.
 To ease forming of the supplied adhesive seal,
install this lavatory when the temperature is
between 70° F (21° C) and 100° F (37° C).
 These instructions contain important care, cleaning,
and warranty information - please leave these
instructions for the consumer.
TOOLS AND MATERIALS REQUIRED
 Safety glasses
 Safety shoes
 Pencil
 Scissors
 Tape measure
 Putty knife
 Hole saw
 Keyhole saw or saber saw
 Drill (1/2” dia. drill bit or larger)
 Clear silicone sealant (optional)
 50/50 mix of isopropyl alcohol and water
 Waterproof sealer (for porous countertops)
PRODUCT INFORMATION
 Approximate weight 18 lbs. (8 Kg.). . . . . . . . . . . . . .
CAUTION: Risk of personal injury or product
damage. This lavatory is made of glass. Always use
the same extreme care appropriate for fine china
when handling to avoid breakage.
ROUGHING-IN DIMENSIONS
Roughing-In Notes
( T ) Pop-up drain 9” (22.9cm).
( S ) 14” (35.6cm) (Based on 12” (30.5cm) riser which may require
cutting.)
* Spout must be 5” (12.7cm) long (min.) for adequate clearance
into lavatory when installed with centerline as shown.
** Spout must be tall enough to clear 3” (7.6cm) rim height and
provide a 1” (2.5cm) air gap per ASME A112.1.2.
*** Based on K-9018, with 1” (2.5cm) of tailpiece exposed.