Manualshelf

Installation Sheet - Wall

ManualsBrandsKOHLER ManualsKitchenGilford Farmhouse Apron Front Wall Mount Vitreous China 30 in. 2-Hole Single Bowl Kitchen Sink in White
12345678
1017834-2-A
Kohler Co.
Español, Página 3
Français, Page 5
BEFORE YOU BEGIN
Observe all local plumbing
and building codes.
Inspect the waste and supply
tubing; replace if necessary.
Provide sufficient wall
reinforcement to support at
least 300 lbs. (136.1 kg).
Prior to installation, unpack the
new sink and inspect it for
damage. Return the sink to its
protective carton until you are
ready to install it.
INSTALL THE NEW SINK
Rough-in the supplies and
drain according to the
roughing-in information
packed with the sink.
Install the wall brackets to the
reinforced wall according to
the roughing-in information
packed with the sink. Level
the wall brackets.
From the underside, install a
toggle bolt, metal washer,
rubber washer, and toggle to
each of the rear bracket
slots.
Position a washer over each
front bracket slot. Position
the tie bar across the front of
the wall bracket sections so it
rests on both washers.
Secure the tie bar in place
from the underside with a
bolt, nut, and washer through
each front bracket slot.
Toggle
Rubber
Washer
Wall
Bracket
Washer
Tie Bar
Washer
Bolt
Nut
Toggle Bolt
Metal
Washer
GILFORD VITREOUS
CHINA SCRUB-UP SINK
INSTALLATION
INSTRUCTIONS

Summary of content (8 pages)