Rough-In Guide

Product Information
Applicable product:
Integral apron, left drain K-1113-LA shown
Integral apron, right drain K-1113-RA not shown
Fixture*: basin area top area weight
Bathing well 43″ (109.2
cm) x 20-1/2″
(52.1 cm)
53-1/2″ (135.9
cm) x 32-1/8″
(81.6 cm)
80 lbs
(36 kg)
water depth capacity
To overflow 15″ (38.1 cm) 57 gal (215.9 L)
* Approximate measurements for comparison only.
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
33 lbs/square foot (162 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no
interference with the drain overflow before drilling any holes.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Fixtures conforms to ANSI Standard Z124.1. All dimensions
are nominal.
1-1/4"
(3.2 cm)
Tile Flange
Detail
3-1/8"
(7.9 cm)
1-1/2" OD
10-13/16" (27.5 cm)
60" (152.4 cm)
42" (106.7 cm)
21"
(53.3 cm)
Recommended faucet area
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
3-1/2"
(8.9 cm)
1-1/4"
(3.2 cm)
21" (53.3 cm)
1-1/4" (3.2 cm)
Roughing-In
K-1113-LA, K-1113-RA
WINDWARD
TM
BATH WITH INTEGRAL APRON
WINDWARDTM BATH WITH INTEGRAL APRON
1047217-1-
D