Load Shed Kit Spec Sheet

ManualsBrandsKohler ManualsGenerator AccessoryLoad Shed Kit for RXT/RDT Automatic Transfer Switch (w/o Load Center)

Transfer Switch Accessories

Standard Features

D Automatically manages up to six residential loads:

d Four customer-provided normally closed power

relays can be connected for management of

non-essential secondary loads. Kohlerr Power

Relay Modules are recommended.

d Two HVAC relays to control two independent air

conditioner loads are included.

D Ships with a 400 Amp current transformer.

D An optional 400amp current transformer with a larger inner

diameter is available for large cables.

D Order the 500 amp current transformer when used with a

Model 60RCL generator set.

D The load shed kit mounts inside the enclosure on Kohlerr

Model RXT and RDT automatic transfer switches.

Load Management

D The load shed kit disconnects non-critical loads to

prevent generator overload, in compliance with NEC

2008.

D The load shed kit monitors generator current and

frequency to determine when to shed loads. This

monitoring prevents frequency drops that can damage

valuable electronics like computers and televisions.

D Load management with the load shed kit allows the use

of a smaller generator set.

Priority Setting

D Loads are added and shed according to their priority.

Load 1 is the top priority,which is added firstand shed last.

Load 6 is the lowest priority.

D Less critical loads can be turned off automatically when

essential appliances are running.

D Load priorities are hard-wired at installation.

Optional Power Relay Modules

D 50 amp DPST normally closed power relay mounted in a

NEMA type 3R enclosure

D Use up to four power relay modules with the load shed kit

D UL/cUL listed

D Dimensions: 172 x 233 x 92 mm (6.8 x 9.2 x 3.6 in.)

D For more information, see specification sheet G6-143

Load Shed Kit

Load Shed Assembly

Applicable Mo dels

D RXT Automatic Transfer Switch (without loadcenter)

D RDT Automatic Transfer Switch (without load

center)

D RDT 200 amp service entrance rated transfer switch

with 42-circuit load center

D A Kohlerr single-phase generator set equipped

with the RDC2 or DC2 controller is required.

G11-124 (Load Shed Kit for RXT/RDT) 10/15c

Summary of content (2 pages)

PAGE 1
Transfer Switch Accessories Load Shed Kit Standard Features D Automatically manages up to six residential loads: d d Four customer-provided normally closed power relays can be connected for management of non-essential secondary loads. Kohlerr Power Relay Modules are recommended. Two HVAC relays to control two independent air conditioner loads are included. D Ships with a 400 Amp current transformer. D An optional 400amp current transformer with a larger inner diameter is available for large cables.
PAGE 2
KOHLER CO., Kohler, Wisconsin 53044 USA Phone 920-457-4441, Fax 920-459-1646 For the nearest sales and service outlet in the US and Canada, phone 1-800-544-2444 KOHLERPower.com Operation D Loads are automatically added or disconnected based on generator capacity. D The Kohler-patented load control system uses dynamic logic to prevent shedding important loads unnecessarily when air conditioning, refrigerator, or water pump motors start.