PIM Spec Sheet

ManualsBrandsKohler ManualsGenerator AccessoryProgrammable Interface Module (PIM)

Residential/Light Commercial Generator Accessories

Standard Features

D The Programmable Interface Module (PIM) provides 2 input connections and 6

outputs to increase the versatility of your generator set.

D NEMA 3R aluminum enclosure allows indoor or outdoor installation.

D Run, Common Fault, and Not In Auto outputs can be used to provide alerts.

D An authorized Kohler distributor or dealer can use SiteTecht software to reassign

other faults to outputs.

D Relays have Normally Open (N.O.) or Normally Closed (N.C.) connections.

D Outputs allow easy connection to existing systems.

D UL listed.

D CSA certification is available.

D The Programmable Interface Module (PIM) can be used with Kohlerr generator

sets equipped with the following controllers:

d RDC2

d DC2

d VSC

Programmable

Interface Module (PIM)

Remote Power Management with OnCuer Plus

D Using Kohler’s OnCuer Plus Generator Management System (sold separately),

the customer can control those items connected to the PIM.

D Customers can prepare the property prior to arrival or protect it when away. The

remote cabin could be lit and heated, or the c oastalhome’s storm shutters couldbe

closed before a storm hits.

D The customer can remotely turn power outputs on or off by navigating in OnCue

Plus to the Controls page. Some examples:

d Building heating or cooling

d Outdoor lighting

d Lawn irrigation systems

d Security gates or cameras

d Well or sump pumps

d Hot tub or water heater

d Storm shutters

d Holiday lighting

d Horn or siren

D The customer can remotely monitor or receive email alerts for changes to inputs.

Some examples:

d Security system

d Fire or gas alarms

d Water level alarms

d Low fuel level

d Temperature switch

d Motion sensors

d Panic switch

D The customer can customize PIM output names by going to the Settings page in

OnCue Plus.

D OnCue Plus can be used to view and control your generator no matter where you

are in the world (internet access required).

D The PIM can be used directly up to 10 amps or drive higher current relays for an

easy power management system.

G6-121 (PIM) 9/14c

Summary of content (2 pages)

PAGE 1
Residential/Light Commercial Generator Accessories Programmable Interface Module (PIM) Standard Features D The Programmable Interface Module (PIM) provides 2 input connections and 6 outputs to increase the versatility of your generator set. D NEMA 3R aluminum enclosure allows indoor or outdoor installation. D Run, Common Fault, and Not In Auto outputs can be used to provide alerts. D An authorized Kohler distributor or dealer can use SiteTecht software to reassign other faults to outputs.
PAGE 2
Kohler Power Systems Asia Pacific Headquarters 7 Jurong Pier Road Singapore 619159 Phone (65) 6264-6422, Fax (65) 6264-6455 KOHLER CO., Kohler, Wisconsin 53044 USA Phone 920-457-4441, Fax 920-459-1646 For the nearest sales and service outlet in the US and Canada, phone 1-800-544-2444 KOHLERPower.com Specifications Connections Rating Wire Size Inputs (qty.2) 10 mA @ 12VDC dry contact 12--24 AWG Outputs (qty.