How to Guide

Product Information
Applicable product:
Bath whirlpool, drop-in, custom pump K-1139-CN
Recommended accessories:
Cable drain with PVC tubing K-7213
Cable drain without PVC tubing K-7214
Trip lever drain K-11677
Fixture*:
Bathing well:
Basin area 46″ (1168 mm) x 15″ (381 mm)
Top area 55″ (1397 mm) x 25″ (635 mm)
To overflow:
Water depth 14″ (356 mm)
Capacity 57 gal (215.8 L)
Weight 55 lbs (24.9 kg)
Drop-in cutout 58-1/2″ (1486 mm) x 34-1/4″ (876 mm)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within
24″ (610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
37 lbs/square foot (181 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
No change in measurements if connected with drain
illustrated. (K-11677)
Fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
7-1/2"
(191 mm)
Max
1-1/2"
(38 mm)
Drop-in Rim
Detail
Pump/Control
Access 20"
(508 mm) W x
15" (381 mm) H
3"
(76 mm)
2-1/2"
(64 mm)
60" (1524 mm)
36" (914 mm)
16-5/8"
(422 mm)
18-1/8"
(460 mm)
3/8" (10 mm)
2-7/8"
(73 mm)
8" (203 mm)
1" (25 mm)
18"
(457 mm)
1-1/2" OD
Roughing-In
K-1139-CN
PROFLEX
®
6036
ACRYLIC CUSTOM BATH WHIRLPOOL
PROFLEX
®
6036 ACRYLIC CUSTOM BATH WHIRLPOOL
1013751-1-
C