KOGAN SMARTERHOME™ 1800W & 2000W ELECTRIC FIREPLACE KASHSFP18BA & KASHMFP20BA
SAFETY & WARNINGS • Read all instructions fully before using the product for the first time and retain for reference. If passing this product on to a new owner, include a copy of this guide. • WARNING: In order to avoid overheating, do not cover the heater. • WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
• Do not run the power cable under carpeting. Do not cover the power cable with rugs, runner or similar coverings. Arrange the power cable away from foot traffic and where it will not be tripped over. • Do not wind the power cable around the unit. • Do not insert or allow foreign objects to enter any ventilation or opening on the heater, as this may result in electric shock, fire or damage to the heater. • Where possible, avoid the use of an extension cable as this may overheat and cause a fire.
PRODUCT OVERVIEW KASHSFP18BA Power Input: 220-240V~50-60Hz Power Consumption: 1800W Control Air Outlet Control Display KASHMFP20BA Power Input: 220-240V~50-60Hz Power Consumption: 2000W Control Air Outlet Control Display
OPERATION CONTROL PANEL Timer Timer Button Heat Flame Flame Button Heat Button Power Power Button Power button • • • Press to turn the appliance On and Off. When the product is in standby, press and hold the Power button for 3 seconds to perform WIFI reset. Use this to place the product in SmarterHome pairing mode. When the product is in operation, press and hold the power button for 5 seconds to change from Celsius (°C) or Fahrenheit (°F).
Open Window Detection • If the room temperature remains below 5°C following a consecutive 3 minutes of use, the heater will assume a window is open and begin monitoring the room temperature. • If the temperature has not risen above 5°C after an additional 7 minutes (10 minutes in total), the heating function will be turned off to conserve energy. • A warning alarm will beep to notify the user, and the error code ‘E4’ will be shown.
REMOTE CONTROL Power button • Press to turn the appliance On and Off. Arrow buttons • • Up and Down buttons to adjust the selected mode. Press any of the following buttons (Flame, Heat, Timer) to select a mode first, then use arrow buttons to adjust. Flame button • • To adjust flame brightness: Press flame button once, then use the arrow buttons to adjust between 5 (High) and 1 (Low) brightness levels.
CONNECT TO SMARTERHOME™ APP Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To register: 1. Tap to enter registration page. 2. The system automatically recognises your country/area. You can also select your country code manually. Enter your email address and tap ‘Next.’ 3.
Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (the Wi-Fi light on the display will be flashing rapidly). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and holding the power button until the Wi-Fi light on the display is flashing. Add device through network 5. Once registered, tap “+” in the upper right corner of the app’s home page to add a new device through the network. 6.
8. Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup. 9. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete. 10. After successfully being added, you will have the option to rename the device and assign it to a location.
SMARTERHOME™ APP FEATURES Flame colour Heating Flame light Set temp. Area temp. Decrease temp. Increase temp. ECO ON/OFF Settings Gear (Heating) Timer Settings Mode (Flame colour) Flame on/off °C/F Flame brightness Schedule Note: • • When device is online, it can be controlled via the app. When device is offline, it displays “Offline” and cannot be remotely powered on.
GOOGLE HOME CONTROL Note: You will need to have set up a Google Home account prior to linking your Kogan SmarterHome™ device. Adding “SmarterHome” to the Google Home app 1. From the home page of the Google Home app, select the “+” icon to access the ‘Add and manage’ page. 2. Select ‘Set up device’, then under the Works with Google banner, select ‘Have something already set up?’ 3. Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service.
4. Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices. 5. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
6. Once connected, the app will display any compatible devices linked to your SmarterHome™ account. From here you can assign them to rooms and set up any routines. 7. Tap on any of the devices to view a list of available commands. Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
AMAZON ALEXA CONTROL Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device. Adding “SmarterHome” to the Alexa app 1. From the home page of the Alexa app, select the “ ” icon in the top-right and select Skills & Games from the sidebar. 2. Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ skill.
3. Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa. 4. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account. 5. Tap ‘Authorise’ to grant Alexa permission to access the SmarterHome™ app and your devices.
6. Once connected, the app will perform a search and display the devices linked to your SmarterHome™ account. 7. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands. Note: Please note that Alexa can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
WALL MOUNT INSTALLATION KASHSFP18BA (1800w model) Note: The heater MUST be installed with the minimum required distance at the four sides of the heater. Drill holes at each side on the wall and insert the plastic expanded plugs within. Attach the bracket to the wall with screws. Place the heater onto the bracket, ensuing that the holes align. Tighten screws on the top of bracket to secure. To remove the heater from the bracket, pull it 5mm outward and then move it 10mm to the left.
KASHMFP20BA (2000w model) This heater is designed to be mounted flat to the wall. Before installation please ensure that the floor and wall are flat, and there is nothing that would prevent the heater fitting flush. 1. 2. 3. 4. 5. 6. 7. The heater is designed to be permanently fixed to a wall with a minimum distance of 300mm between the base of the heater and the floor. A distance of 600mm is recommended for the optimum height on the wall.
NOTES
NOTES
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.
