Contents Safety & wakings Overview Assembly Operation Warming up before use Cleaning & core Motes iE Ww
SAFETY & WARNINGS Read all of the instructions in this guide before using this product. Retain this guide for future reference, Do not skip, substitute or modify any steps or procedures In this guide, os doing so could result in personal Injury or product damage. = Before starting any exercise program, consul your physician to determine if you hove ary premedical or physical conditions that could put your health and safety at risk or prevent you from using the equipment proper.
EARNING — KEEP BATTERIES OUT OF REACH OF CHILDREN Always use the equipment as intended. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, cease use immediately and contact help kegon.com for assistance. Do not use until resolved. Dio not place fingers or any other objects into moving parts of the exercise equipment.
He. Ascription ory He. Ascription ony 1 | Console ly 7% | Seat ol 3 | Handlebars x1} 82 Lower assembly wiring «0 7 | Handlebar cover (upper) Loft foot pedal a) 8 | Handlebar cover lower) [2] #9 | Right foot pedal [£3] 10 | Handlebar post fl #1 13-15 Spanner [5] 18 | Adjuster (Mi) 8) Fz | Allen key 0 17 | Frame base x} 83 Allen key Front stabilizer [50] 94 Upper assertively wiring Rear stabilizer bey Hardware: Gam MBXIZL. (x4) 8 Spring washer & Washer ofl 9 STALINIST.
Step 1 Attach the fort and rear stabilizers (29 and 68) using the screws, washers and spring washers (34, 35, 36) and Allen key (92) shown below.
83 NE, Button function: MODE To switch window of TIME / DISTANCE / CALORIES / PULSE. 2. To confirm selection when setting. f. Pressie clear the set value. RESET 2. Hold for 3 seconds to restart the console. 1. Valueless of TIME / DISTANCE / CALORIES / PULSE. up 2. Prepossessing selection & Long press to quickly increase settings. To To set value of TIME / DISTANCE / CALORIES / PULSE. DOWN | 2 Press to decreases selection 3. Long press to quickly decrease settings.
Operation Function Power on Install the battery, the console will display Tull serene for two seconds, accompanied with a two second beep, Tum the power on, Press MODE button to set TIME / DISTANCE / CALORIES / PULSE, then press SET to confirm the value. Press MODE again to begin exercising. 4, During exercise, TIME / DISTANCE / CALORIES / PULSE will start counting. Po Newt rote sensing / “PULSE” reading Te show the PULSE reading on the display, simply use a 5.
WARMING UP BEFORE USE FH Bes seconds for each 20 seconds 20 seconds seconds 20 seconds 20 seconds seconds 25 seconds for such lag 30 seconds wid swoons Rerecords x 3 times 20 seconds seconds for such ley Times 15 seconds
CLEANING & CARE Earring the presentiment periodically in order to detect any dorm age or wear which may have been produced, Lubricate moving parts with light oil periodically to prevent premature wear, Inspect and tighten oll parts before using the equipment, replace any defective parts immediately and do not use the equipment again until it is In perfect working radar. The equipment can be cleaned using a damp cloth ond mild non-abrasive detergent. Do not use solvents.
Mead more Information? We hope that this user guide has given you the assistance needed for 0 simple set-up, Fon the roost up-to-date guide for your product, as well as any additional assistance you may require, head online to help. kogurn.oonm kbgan.