Coding Technical Manual 2020/04 Technical Manual Consumables Control Module (CCM10404715) Revision 1.
Coding Technical Manual 2020/04 Contents 1. Introduction ..........................................................................................................................................3 2. System Overview .................................................................................................................................4 3. Installation ............................................................................................................................................
Coding Technical Manual 2020/04 1. Introduction This document is the user manual for the Koenig & Bauer Coding GmbH Consumables Control Module (short: CCM 10404715). This module is only used in the alphaJET 5 continuous inkjet printer (short AJ5; host product). This module reads the RFID Tags on the consumables to ensure the correct types are used. Read data is provided to the AJ5 printer.
Coding Technical Manual 2020/04 2. System Overview The CCM10404715 reads data from the RFID Tags on the consumable bottles of the AJ5 printer. The consumable bottles are filled with ink or solvent. Not each solvent can be used with each ink. So the read data prevents the printer from using incorrect ink / solvent combinations. In addition the data read by CCM10404715 provide the operation parameters of the consumables to AJ5 printer. The module is designed for use in the AJ5 printer only.
Coding Technical Manual 2020/04 3. Installation The CCM10404715 is installed following these steps: - Insert CCM10404715 in the bottle cage on the front door. - Use two screws to fix CCM10404715 in the bottle cage - Connect the CCM10404715’s cable to the AJ5 printer Figure 2 CCM10404715installed in bottle cage. After installation you can power up the AJ5 printer See AJ5 user manual for more information.
Coding Technical Manual 2020/04 4. Operation The CCM10404715 reads the data from the tags on the consumables cyclic. It also recognizes when a tag is missing. With each add of a consumable, the AJ5 printer increments a counter on the RFID tag. So the printer recognizes when a consumable is empty and generates a message for the user to change the consumable.
Coding Technical Manual 2020/04 5. Compliance Statements USA The CCM10404715 has been tested to FCC 15.209 radiated limits for a class A digital device. The CCM10404715 will be installed within the printer which is tested as a Class A digital device. This device complies with Part 15 of the FCC Rules. Operating is subject to the following two conditions: 1. This device may not cause interference, and 2.
Coding Technical Manual 2020/04 In accordance with FCC CFR47 §15.212, the printer (host product) label shall contain the following statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Coding Technical Manual 2020/04 1. Technical Specification Mechanical Dimensions RFID modul typical dimensions L 110mm, W 75mm, H 12mm Cable length 520mm Material Antenna and PCB Plated copper on FR4 PCB Electrical Cable Screened cable with 10 wires Connector 16 pin WR-MPC3 Connector Voltage 5V DC Current 120mA typ.
Coding Technical Manual 2020/04 2.