LUMA450 Portable Full HD Smart Projector Quick Start Guide
CONTENTS EN INTRODUCTION PRODUCT OVERVIEW USING YOUR PHONE CHARGING THE PROJECTOR POWERING THE PROJECTOR ON/OFF ADJUSTING THE FOCUS ADJUSTING VOLUME CONNECTING TO AN EXTERNAL DEVICE CONNECTING TO A WIRELESS NETWORK CONNECTING TO A BLUETOOTH DEVICE SCREEN MIRRORING (ANDROID/WINDOWS - MIRACAST®) SCREEN MIRRORING (iOS) CUSTOMER SERVICE CONT ACT INFORMATION 5 5-7 8 9 9 9-10 10 10-11 11 12 12-13 14 14 FR INTRODUCTION VUE D'ENSEMBLE DU PRODUIT A L'AIDE DE VOTRE TELEPHONE CHARGERLEPROJECTEUR ALLUMER/ETEINDRE LE
INTRODUCTION Thank you for purchasing the KODAK LUMA 450 Portable Full HD Smart Projector. This User Guide is intended to provide you with guidelines to ensure that operation of this product Is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. This product Is covered by a limited one-year warranty. Coverage is subJect to limits and exclusions. See warranty for details.
B 1. Power 2. Speaker 3. Air Inlet 4. Tripod Dock 5. Rating Label 6. Non-Slip Mat 7. Focus Wheel 8. Speaker CD -- - '- 0000000 000000000 000000000 . 0000000 I - -~ I 1 _/ ! = = = c::, C!5 - V ---0 I . . . _- EN l6 ' -:rl ~ CJ I - I ' ' . . l ~ 0 -e - -o -o , - u.. D- 0 -• 00000000 ~ I I '• I I 0 0 ooonoooo OOOGOOO . ., r- -- -- -' I ! 0 0 c::, 000000000 000000000 Q<'J u,0000 I • 0 ,, -.
Indicator Power On/Off @ • @ Home Confirm Direction Key Mouse Back c:::::::J c:::=, c::::::, @@@ Cl- 'v Cl• ~ Menu Volume Control/ Page Up & Down (see note below) AAA Battery 1. Within two (2) minutes of turning on the projector, press and hold both the Vol+ and Vol - keys for approximately three (3) seconds. 2. The indicator light in the remote will flash quickly during this time and then stop. When the flashing stops, this indicates that the remote has successfully paired with the projector.
USING YOUR PHONE For greater ease of use and a more intuitive experience, you can control the projector with the KODAK LUMA App from the Apple App Store® or the Google Play1 M store. Once installed, you can use your phone as a remote to navigate through menus, mirror your screen, easily input login information for apps, and control media volume. Make sure to try aut the reverse screen mirroring feature, which allows you to view the LUMA interface directly on your phone, and navigate that way! 1.
CHARGING THE PROJECTOR Before using the proiector, connect it to the charger and allow it to fully charge. Always use the original charger that was provided to ensure proper charging. If the red indicator LED light 1s flashing, you see a red battery icon in the upper right corner of the screen, or you receive a Low Battery notification on-screen, this means that the battery is low. While the proiector is charging, the indicator LED will be a solid red light.
NOTE: If a specific image or video remains fuzzy after adjusting the focus wheel, try pressing and holding the confirm button to return to the main menu. If the main menu graphics appear clear and the image is still fuzzy, the problem may be the image or video quality. ADJUSTING VOLUME To adjust the device volume during playback, use the + and - buttons on the remote control. There are also volume controls on the remote app for your phone.
Earphone Speaker CONNECTING TO A WIRELESS NETWORK Connecting to the wireless network will allow you to use any of the pre-loaded apps featured on your projector's home screen, as well as download apps from the app store. This is a necessary step to allow you to take advantage of the Android operating system. 1. From the home screen, select Settings> Wi-Fi. 2. Select the correct network from the list and use the arrows on top of the projector or the remote to navigate the keyboard and enter the password.
CONNECTING A BLUETOOTH DEVICE 1. From the home screen, select Settings. 2. From the Settings menu, select Bluetooth. 3. Turn on the device you want to connect to your projector. 4. Select the device on the Bluetooth list to connect. 5. Wait a few mintues for your projector to connect to your device. SCREEN MIRRORING (ANDROID/WINDOWS - MIRACAST®) 1. From the projector home screen, navigate to the Source page, select Screen Mirroring, and then select Miracast®.
NOTE: Check your device settings for the screen casting/screen mirroring options. The name of the function may vary by device model and service carrier. Other names used may include, Cast, or Screen Mirroring, as well as Smart View. All devices must be running at least Android version 4.1.2. b. To activate screen mirroring on your Windows®10 device: i. From the start menu, select Settings. ii. In the Settings menu, select Devices. iii.
SCREEN MIRRORING (iOS) 1. From the projector home screen, select Source, select Screen Mirroring, and then select AirPlay. The name of the projector will be displayed on the screen so that you can accurately identify it when attempting to connect. 2. Make sure your device is connected to the same network as your projector. 3. Activate the screen mirroring software on your device. a. To activate screen mirroring on your ,os device: 1.
II march10, II logo e l'1mmag1ne commerc,ale di Kodak sono utllizzat, secondo llcenza forn,ta da Eastman Kodak Company Android un march,o commerciale di Google Inc. 10S un march10 commerc,ale d1 Cisco regIstrato negli StatI Unit1 e altn paesI e ut,llzzato secondo hcenza . Apple e un march10 commerc,ale di Apple Inc.• regIstrato negh USA e in altn paes1.