User Manual

ManualsBrandsKodak ManualsCamera & PhotoKodak PIXPRO Astro Zoom AZ901-BK 20MP Digital Camera with 90X Optical Zoom and 3" LCD (Black)

User Manual

KODAK

DIGITAL CAMERA

PIXPRO AZ901

Summary of content (136 pages)

PAGE 1
KODAK PIXPRO AZ901 DIGITAL CAMERA User Manual
PAGE 2
BEFORE YOU START Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA JK Imaging Europe, 71 Clarendon Road, Watford, WD17 1DS, UK Company Website: kodakpixpro.com INDUSTRY CANADA This device complies with Canadian RSS-210. This device complies with Industry Canada license-exempt RSS standard (s).
PAGE 3
For Customers in Europe This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection of electrical waste and electronic equipment in the European countries. Please do not throw the equipment into domestic refuse. Please use the return and collection systems available in your country for proper, safe disposal of this product. “CE” mark indicates that this product complies with the European requirements for safety, health, environment and customer protection.
PAGE 4
- EN 301 489-17 V3.2.0 (2017-03) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems For SAR statement A minimum separation distance of XX cm must be maintained between the user’s body and the device, including the antenna during body-worn operation to comply with the RF exposure requirements in Europe.
PAGE 5
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 6
About this Manual Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual carefully and keep it in a safe place for future reference. JK Imaging Ltd. reserves all rights of this document. No part of this published manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any means, without the prior written permission of JK Imaging Ltd..
PAGE 7
SAFETY NOTES Safety notes for this camera Do not drop the camera or allow it to hit solid objects. Do not attempt to disassemble or repair the camera. Do not use or store the camera in dusty places or on a beach to prevent dust or sand from entering the camera, causing possible damage to it. Do not use or store the camera in a hot environment or under direct sunlight. Do not use or store the camera near a powerful magnetic field, for example near a magnet or transformer.
PAGE 8
Safety notes for battery Please use a battery that is the same type as the one included. Please use the attached charger to charge the battery. If battery fluid leaks inside the camera, contact our customer service department. If battery fluid leaks onto your skin, rinse your skin with clean water and seek immediate medical attention. Disposal of used batteries should be carried out in accordance with the local (national or regional) regulations.
PAGE 9
Safety notes for memory card We suggest buying only well-known, name brand memory cards to ensure peak performance. Format the memory card using the camera before you use it or insert a new one. Do not drop the memory card or allow it to hit solid objects to avoid damaging it. Do not attempt to disassemble or repair the memory card. Do not expose the memory card to water. Always keep it dry. Do not remove the memory card when the camera is turned on. Otherwise, the memory card could be damaged.
PAGE 10
Other Safety Notes Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. Do not hang the neck strap of the camera around the neck of a child. When using your camera on an airplane, observe the relevant rules specified by the airline. Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels.
PAGE 11
CONTENTS BEFORE YOU START �� 1 SAFETY NOTES ��6 CONTENTS �� 10 GETTING READY �� 14 Accessories Included �� 14 Install
PAGE 12
Overview of the Screen Icons in Playback Mode �� 30 How to take pictures �� 31 Using the Mode Dial ��32 BASIC OPERATION �� 51 Using EVF (Electronic View Finder) ��
PAGE 13
PLAYBACK �� 71 Viewing Photos and Videos ��71 Thumbnail View �� 72 Using Zoom Playback (for still pictures only) ��73 Continuous Shot Group Playback ��
PAGE 14
Copy to Card ��106 File Numbering ��106 Reset Settings �� 107 Version �� 107 CONNECTIO
PAGE 15
GETTING READY Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer.(Based on sales in different countries or regions, the shape of the AC adapter will vary. Please subject to the actual product will prevail.
PAGE 16
Install lens cap and neck strap 15 15
PAGE 17
Part Names 4 5 6 7 8 9 10 1. Micro HDMI port 2. Micro USB port 3. Zoom lever 11 3 2 1 4. Shutter button 5. Strap eyelet 6. xposure compensation E button 7. Continuous shot button 8. Power button 9. AF assist beam/Self-timer lamp 10. Flash lamp 11.
PAGE 18
5 12 1314 15 1617 18 19 20 21 24 23 22 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Diopter adjustment knob Microphone Electronic view finder (EVF) EVF / LCD switch button Indicator lamp Mode dial Fast video recording button i button Menu button Jog dial [ ] AF button/Up button [ ] Delete button/Self-timer button/Down button [ ] Macro button/Left button [ ] Flash button/Right button 22. Display button 23. Playback button 24.
PAGE 19
25. 26. 27. 28. 28 2726 Vari-angle LCD Speaker Lens function ring lever Lens function ring 25 29. Battery cover 30.
PAGE 20
Installing Battery and Memory Card 1. Open the battery cover. 1 2 2. Insert the battery into the battery compartment according to the negative and positive directions as illustrated in the picture. Push the battery down until it locks in place.
PAGE 21
3. Insert the memory card into the memory card slot as shown in the diagram. 4. Close the battery cover. 1 2 Write protection buckle The memory card (SD/SDHC) is optional and not included in all camera packaging. It needs to be purchased separately. Please use an original memory card which is Class 4 or higher and has a capacity of 4GB to 32GB. To remove your memory card, open the battery cover, gently press the memory card to eject it and remove it carefully.
PAGE 22
Charging Battery Please insert the battery and charge it under shutdown mode. 1. Connect the camera and the power charger using the supplied Micro USB cable. 2. Insert the plug of the power charger into the power outlet to charge the battery. After the battery is stored for a long period of time, use the supplied power charger to charge the battery prior to use.
PAGE 23
Vari-angle LCD The LCD is housed in the camera’s body. You may follow the directions shown below to move it as needed: 3 2 1 4 1. Turn on the LCD along the direction shown by arrow ①. 2. Available to rotate 180° along the direction shown by arrow ②. 3. Available to rotate 90° along the direction shown by arrow ③. 4. Turn off the LCD along the direction shown by arrow ④. Please don’t rotate the LCD with excessive force to prevent damages.
PAGE 24
Turning Camera On and Off Press the power button to turn the camera on. To turn the camera off, press the power button again. Power button ON/OFF When the power is off, press and hold the playback mode.
PAGE 25
Set your Language, Date/Time Set your Language, Date/Time after the first power-on 1. When you turn the camera on for the first time, the language selection screen appears. 2. Press the [ ]/[ ] button to select your desired language. 3. After you press the button to confirm the selection, the Date/Time settings screen appears. Language Sound Settings য檥И‫ކ‬ Power Saver Powe World Time Home 䚐ạ㛨 Date & Time 2017.04.30 00:00 English B LCD Brightness Français Select Se Set Exit Date & Time H-M 5.
PAGE 26
Resetting your Language After you set your language for the first time, follow the instructions below to reset your language. 1. Press the button, press the [ ]/ [ ] button to select , and press the button to enter the menu. 2. Press the [ select . ]/[ ] button to 3. Press the [ ]/[ ] button to select「Language」and press the button to enter the menu. 4. Press the [ ]/[ ] button to select your desired language and press the button to confirm. 5. Press the button and the shooting screen appears.
PAGE 27
Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. 1. Press the button, press the [ ]/[ ] button to select , and press the button to enter the menu. 2. Press the [ select . ]/[ ] button to 3. Press the [ ]/[ ] button to select「Date & Time」and press the button to enter the menu. Sound Settings Power Saver 6. Press the button and the shooting screen appears. 26 26 English World Time Home Date & Time 2017.04.
PAGE 28
MODE OVERVIEW LCD Display Overview of the Screen Icons in Shooting Mode 1 2 34 5 6 7 8 9 10 11 00:00:00 12 0000 13 14 15 16 x3.0 17 18 EV-0.0 F00.
PAGE 29
00:00:00 32 0000 x3.0 31 30 29 28 27 26 EV-0.0 F00.
PAGE 30
Overview of the Screen Icons in Movie Mode 1 00:00:00 4 3 1 Battery Status 00/15 2 2 Number of Videos Captured 3 Continuous Recording Time 4 Movie Mode 29
PAGE 31
Overview of the Screen Icons in Playback Mode 1 2 3 4 5 6 7 2017/04/30 000-0000 16 15 14 13 8 0000 x2 Thumbnail3x3 1 30 9 10 11 12 Eye-Fi ON (with signal) 9 2 Quality 10 Zoom Magnification Area 3 Capture Date 11 4 File Name 12 Index Prompt 5 Shooting Pixel Ratio 13 Touch-up 6 Image Size 14 HDR 7 Battery Status 15 DPOF File Icon 8 Continuous Shot Group Playback 16 File Protection Icon Image Area Image Zoom Ratio
PAGE 32
How to take pictures 1. Hold the camera with both hands as shown in the figure, not blocking the flash and lens by fingers. 2. Aim the camera at the object and then frame with the LCD. 3. Use the zoom lever to select Tele or Wide positions to zoom in or out on your subject. 4. Press the shutter button half way to focus on the subject. When the focus frame turns green, press the shutter button completely down to take the picture.
PAGE 33
Using the Mode Dial This camera provides a convenient mode dial that allows you to manually switch between different modes with ease. The available modes are listed below: Mode Name 32 Icon Description Auto Mode In this mode, the optimal conditions for taking pictures will be set based on the subject and environment. It is the most commonly used mode for taking pictures.
PAGE 34
Manual Mode This mode is for manually setting the aperture, shutter speed and ISO value. Face Beautifier This mode automatically enhances facial features with skin softening touches and eye brightening capabilities. Wi-Fi Mode Enable image transmission and remote control by connecting smart device with Wi-Fi. Scene Mode Choose from 14 different pre-set scene types and effects for your photos. Movie Mode Record videos.
PAGE 35
1. Turn the mode dial to select the mode you want. Please refer to the table below if any nonadjustable options in mode: (O: Optional X: Not optional) Options Mode Aperture Shutter X X (Display) (Display) X (Display) O O 34 O X (Display) O EV 2. Press the settings. button to configure ISO 3. Press the [ ]/[ ] button to select an adjustment setting. O O 4. Press the [ ]/[ adjust the parameters. O O 5. Press the button to confirm the settings and enter the shooting screen.
PAGE 36
Face Beautifier 1. Turn the mode dial to select face beautifier mode ( 2. Press the button and press the [ ]/[ ). ] button to select . 3. Press the [ ]/[ ] button or rolling the jog dial to select an option and press the button to confirm and enter the shooting screen.
PAGE 37
Wi-Fi Mode Enable image transmission and remote control by connecting smart device with Wi-Fi. Matters needing attention before use: Your smart device operating system version needs to be iOS 8 or higher, or Android 4.2 or higher. If not, please upgrade your smart device before using the App. Please do not use in places having high intensity magnetic field, electrostatic and electric wave interference (for example near a microwave oven), which may cause failure in receiving signals.
PAGE 38
AP Mode 1. Rotate the mode dial to and then enter the Wi-Fi selection interface. 2. Press the [ ]/[ ] button to select and set options. Wi-Fi Mode Settings Station AP mode In AP mode, the camera will act This camera may connect with your smart device through Wi-Fi. Settings of Camera: 1. Select and press the button to enter the setting interface. 2. Press the [ ]/[ ] button to select options to be adjusted, and press the button to enter the option setting interface.
PAGE 39
Station Settings of Smart Device: 1. Enable the Wi-Fi of smart device and then search surrounding wireless devices. 2. Select the name of camera SSID to be connected and then input the eightdigit number password after WPA2-PSK on the camera. 3. Click the icon of the App the APP. to enable Set up completion: Once the App is connected to the camera, functional operations can be enabled on the smart device.
PAGE 40
Press the [ ]/[ ] button to select: Enter Password • Scan: Search again surrounding wireless devices. • : Select the name of device to be connected. A/a #!? • Back: Back to Wi-Fi mode select screen. 4. Press the [ ]/[ ]/ [ ]/ [ ] button or rolling the jog dial to select and then press the button to confirm your selection. Enter the completion of WPA2- PSK after password storage.
PAGE 41
Display of Wi-Fi Connection Status: 5. Connect to network after storing the password. • If connected, the LCD will display as shown below: The Wi-Fi has successfully connected but App is not enabled. Wi-Fi Mode Wi-Fi Mode AP mode AP mode Connected with device Station Connected with device MAC address: xx:xx:xx Disconnect SSID: XXXXXXXX Disconnect • If connect failed, please check Wi-Fi device and try again. 6.
PAGE 42
For interrupting the connection: Wi-Fi Mode Disconnect from device? No Setting The name of this camera can be changed through key stroking. 1. Select the and then press the button to enter the setting interface. 2. Press the [ ]/[ ] button to select options to be adjusted and then press the button to enter the menu. Yes DSC device • No: Keep Wi-Fi connected and back to previous page. PIXPRO AZ901_XXXX MAC address 38:67:93:XX:XX:XX • Yes: Disconnect and back to Wi-Fi connection screen.
PAGE 43
DSC Device App Operating Instructions The default name of DSC device is「PIXPRO AZ901_XXXX」. Change the name of DSC device through key stroking. Refer to the "PIXPRO Remote Viewer User Manual" located on the web: Americas DSC device PIXPRO AZ901_XXXX $ D #!? Name between 1-18 Letters Save Cancel For the method of input, please refer to the introduction on password input on page 39. http://kodakpixpro.com/ Americas/support/downloads.
PAGE 44
Scene Mode You can select an appropriate mode from the 14 scene modes according to the type of environment you are shooting. The camera then configures the most appropriate settings automatically. 1. Rotate the mode dial to , then the LCD will display as below: Auto Scene The camera automatically detects the most suitable shooting scene. 2. Press the [ ]/[ ] button to select a scene, and press the button to confirm. 3.
PAGE 45
Scene Auto Scene Description The camera automatically detects the most suitable shooting scene. Panorama Mode For shooting up to 360-degrees of landscape. Handheld Night Reduce blur when shooting low light/ illuminated scenes. 44 Multi Exposure Take several shots and overlap as a single image. Cat/Dog The camera automatically takes a picture when a dog or cat face is detected. Snow For subjects in the snow. Reduce underexposure. Party For subjects at night without using a tripod.
PAGE 46
Auto Scene (ASCN) In “ASCN” scene mode, the camera can detect different environments intelligently and automatically select the best scene and photo settings for you. “ASCN” can intelligently detect the following scenes: Mode Name Description Auto The camera will automatically adjust the exposure and focus to ensure the best possible pictures. Landscape For landscapes, will automatically adjust the exposure to match the background.
PAGE 47
Panorama Mode This feature allows you to capture a panoramic view that will have significantly more content than a single photograph. Follow the instruction arrow with a smooth and steady movement of the camera to seamlessly shoot an ultra-wide scene of up to 360 degrees. Follow the steps below: 1. Select the panorama mode ( ) and then press the button to confirm. 2. Press the [ ]/[ ]/[ ]/ [ ] button to select a shooting direction.
PAGE 48
During panorama mode shooting, press the button to interrupt shooting and save the current pictures taken. Press the [ ] button to cancel shooting and not to save the previously taken pictures. During panorama mode shooting, when the moving direction of the camera is wrong or the angle deviates from the internal settings, the LCD shows a warning message 「Improper alignment. Please try again.」and the current pictures taken are saved.
PAGE 49
Functions that can be adjusted in each scene are as below: Scene Mode： Adjustable Functions Auto Scene Flash*1/Self-timer Multi Exposure Expo Metering Cat/Dog Auto Shooting/Continuous Shot/ Expo Metering/Macro Snow Continuous Shot/Expo Metering/ Flash/Self-timer Party Continuous Shot/HDR/Expo Metering/Flash/Self-timer/Macro Sport Continuous Shot/Expo Metering Night Portrait HDR/Expo Metering/Self-timer Portrait Continuous Shot/HDR/Expo Metering/Flash/Self-timer/Macro Children Continuous
PAGE 50
Custom Settings The user can store the frequently used shooting modes and parameters and switch to this mode for quick adjustment. Settings under mode (unset state or state after reset): 1. Turn the mode dial to select the mode, and enter the setup screen, as shown in the figure below: Go to setting CS mode Yes Or Rotate the mode dial to skip. Select one capture mode to define CS . For setting under other modes (use this method to select a different custom setting): Auto Mode Confirm Exit 2.
PAGE 51
5. Press the [ ] button select「Custom Settings」and press the button to enter the menu. Date Imprint Off Quick Review Off Cont. AF Off Face Detection Off Custom Settings Normal Function Ring (Smart) Select Set Exit 6. Select「Yes」to save or「No」to cancel. Custom Settings Set camera to user custom mode No Yes 50 50 7. Turn the mode dial to switch to the custom settings ( ). 8. The photo settings you stored the last time are invoked.
PAGE 52
BASIC OPERATION Using EVF (Electronic View Finder) EVF functions as the LCD, which can be used to observe the scene and objects and for playback, preview and menu operations. EVF has the following advantages: It will not be affected by ambient light and may avoid poor composition due to light reflection on the LCD. 3. When the screen display is not clear, rotate the dioptric adjustment knob to adjust the screen sharpness. 4. Press the button again or restart the camera to switch back to the LCD display.
PAGE 53
Using the Zoom Function Your camera is equipped with two types of zoom functions: optical zoom and digital zoom. Toggle the zoom lever of the camera to zoom in or out of the subject while taking pictures. Zoom Indicator x3.0 EV-0.0 F00.0 0/0000 ISO00000 ON/OFF When the optical zoom reaches the threshold as digital zoom, release and turn the zoom lever to T to switch between the optical zoom and digital zoom.
PAGE 54
Display Setting Mode: Press the screens. button to switch among 4 No Message Display Function Message Display 00:00:00 0000 x3.0 EV-0.0 EV-0.0 F00.0 0/0000 ISO00000 Display with Grid and Histogram 00:00:00 F00.0 0/0000 ISO00000 Message Display x00.0 00:00:00 0000 0000 x3.0 EV-0.0 F00.0 0/0000 ISO00000 EV-0.0 F00.
PAGE 55
Mode: Press the 3 screens. button to display the playback screen, press the Function Message Display No Message Display 0000/00/00 000-0000 Thumbnail3x3 Detailed Message Display 0000/00/00 000-0000 EV-0.0 000mm F00.
PAGE 56
AF Area In different photo shooting modes, you can select different focus methods. (Adjustable in mode) 1. Press the [ ] button to display the settings screen. Center-AF Spot Focus Choose the single-point focus position within the scope of focus. Object Tracking Smart tracking of the object in motion under the focusing shooting. 3. Press the button to confirm the settings and enter the shooting screen. After enabling spot focus, rolling the jog dial to adjust the position of focus point in the screen. 2.
PAGE 57
Macro Mode The Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. 1. Press the [ ] button to enter the Marco Menu. Macro On 2. Press the [ ] button to select the following 2 modes: • Macro On Select this option to make focusing on the object closer to the lens (At the W side, the shooting distance should be more than 5 cm). • Macro Off Select this option to disable Macro. 3.
PAGE 58
Self-timer Mode Using this function can take photos at regular time. The camera can be set to shoot after 2 seconds, 10 seconds since pressing the shutter or shoot after smile. 1. Press the [ ] button to enter the self-timer menu. • Self-timer 10sec A single picture is shot 10 seconds after the shutter button is pressed. • Self-timer Smile Press the shutter button and a picture will be taken immediately after a smile is detected. • Self-timer Off Disables the self-timer. Self-timer 2sec 3.
PAGE 59
Flash Mode When enabling the smile detection, pressing the shutter or the button can disable the self-timer and return to the shooting screen while keeping the self-timer smile setting. Self-timer settings will remain after completion of shooting with the self-timer. They can be canceled by switching modes or by turning the camera off and then on again. The flash provides supplemental light for the scene.
PAGE 60
• Fill Flash For fill flash at the moment of taking a picture. • Flash Auto Camera flash goes off automatically based on existing light conditions. • Red-Eye Reduction The camera emits a brief pre-flash before the picture is taken to reduce redeye effects. • Slow Sync. This allows you to take pictures of people at night that clearly show both your subjects and the night time backdrop. The use of a tripod is recommended when shooting with this setting. • Slow Sync.
PAGE 61
WB (White Balance) Mode The white balance function allows adjustment of the color temperature for different light sources. (Adjustable in Mode) • AWB • Daylight • Cloudy Follow the steps below to set white balance of the camera: • Fluorescent • Fluorescent H • Incandescent • Manual WB Set WB according to the current light source, press the button to set. • Color Temp. (1900K~10000K) Press the button to enter and rolling the jog dial to adjust the color temperature value.
PAGE 62
WB Bracketing: Press the button to enter options and then press the [ ]/[ ]/ [ ]/[ ] button to adjust the shift and rolling the jog dial to adjust the BKT value (0, 1 and 2). Rotate clockwise to adjust X axis (B-A). BKT value Rotate counterclockwise to adjust Y axis (G-M). BKT value Press the button to confirm your settings. WB Bracketing : BG±1 Shift B9 G2 BKT 1 Confirm WB bracketing is for setting the bracketing range. Shift to both sides for 3 spaces at most.
PAGE 63
Continuous Shot Mode Functions that can be enabled under each mode may be different. 2. Press the [ ]/[ ] button to select the following 8 modes: Mod: • For setting the single, continuous shot, Time-Lapse, HDR , WDR or AE bracketing functions. Single Capture a single shot only. • Continuous Shot For taking more than one picture continuously. • Cont.Shot-Fast (2M) For continuous shot with 2M pixels. • Cont.Shot-High Speed (VGA) For continuous shot with VGA pixel.
PAGE 64
• HDR (-1EV, 0EV, +1EV) This setting is to control the high dynamic image range in taking still pictures, with vivid effect in highlight and that the effect in dark parts can identify the outline and depth of the object.
PAGE 65
Exposure Compensation Functions Setting The EV function menu of the camera includes functions, such as EV adjustment, ISO, shutter adjustment, aperture adjustment, etc. Using the appropriate function settings can improve your pictures. Please follow the steps below to set: EV Adjustment Set up to adjust the picture brightness. In the case of a very high contrast between the photographed object and the background, the brightness of the picture can be appropriately adjusted. (Adjustable in mode) 1.
PAGE 66
ISO Adjustment Shutter Speed Adjustment ISO allows you to set the sensitivity of the camera sensor. Please use a higher ISO value in darker places and a lower value in brighter conditions. For shutter speed, the camera may automatically set the aperture value corresponding to the manually set shutter speed so as to obtain a most suitable exposure value. The movement of object may be shown by adjusting the shutter speed.
PAGE 67
Using Quick Recording Aperture Adjustment You can adjust the aperture size value. Selecting a large aperture opening will emphasize the point of focus and show a blurry background and foreground. A small aperture opening will keep both the background and main object in clear focus. (Adjustable in mode) In shooting mode, press the begin recording video. 00:00:00 button to 00/15 15 pictures at most can be taken by pressing the shutter when recording. EV-0.0 F00.
PAGE 68
i Button Function Menu Functions that can be enabled are different under each mode. Mode: The image color setting allows you to select different effects. 1. Press the button to select the Image color setting menu. Normal 2. Press the [ ]/[ ] button to select the image color setting options.
PAGE 69
Using the Lens Function Ring There is a lens function ring lever in one side of the lens. Moving it up and down can switch among ZOOM/AF, SMART and MF mode. 2. Rotate the lens function ring to optically zoom the object. Zoom/AF Mode x3.0 Rotate the lens function ring for optical zoom. 1. Switch the lens function ring lever to position . EV-0.0 F00.0 0/0000 ISO00000 Rotating the lens function ring in Zoom/AF mode is only for optical zoom. 00:00:00 68 EV-0.0 F00.
PAGE 70
Function Ring (Smart) Mode Rotate the lens function ring to set parameters of aperture, shutter, ISO, EV, etc. 1. Switch the lens function ring lever to position . 2. Rotate the lens function ring or rolling the jog dial to select options needed. EV-0.7 EV+0.7 EV-0.3 EV-0.0 EV+0.0 F00.0 EV+0.3 0/0000 ISO00000 3. Press the button to complete the setting and enter shooting screen. The selection of functions of Function Ring (Smart) in the menu is needed before using Function Ring (Smart) mode.
PAGE 71
MF(Manual Focus) Mode Rotate the lens function ring for manual focus. 1. Switch the lens function ring lever to position . 2. If the lens function ring is operated or rolling the jog dial , the focus enlargement frame will appear on the LCD. After clear focus is achieved through manual adjustment, press the button to close the focus enlargement frame. The camera will return to the normal shooting screen.
PAGE 72
PLAYBACK Viewing Photos and Videos For viewing taken photos and videos on the LCD: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD. 2. Press the [ ]/[ ] button to scroll through the photos or video clips stored in the built-in memory or on the memory card. 3. To play a selected video clip, press the button to enter the movie playback mode. An operation guide appears on the screen when playing back a video.
PAGE 73
Thumbnail View When in playback mode, rotate the zoom lever counter to the position to display thumbnail images of the photos and videos on the screen. W Zoom Out T Zoom In 2. Press the [ ]/[ ]/[ ]/ [ ] button to select a picture or video clip to view and press the button to restore it to the original size. 3. As shown in the picture, press the button to select index mode. 4 options in [ Index Mode ] : • Single Index • Date Folder • Cont. Group 1.
PAGE 74
Using Zoom Playback (for still pictures only) When playing back photos, you can also use the zoom lever to zoom in on the photos 2 to 8 times. 1. Press the button to switch to playback mode. 2. Press the [ ]/[ ] button to select a picture to be zoomed in. 3. Rotate the zoom lever to position to zoom in. 4. Rolling the jog dial clockwise to zoom in and counterclockwise to zoom out. 5. The bottom right corner of the LCD will display the number of times and area of the photo zooming operation. x2 x2 6.
PAGE 75
Continuous Shot Group Playback High speed (VGA) and fast (2M) can make Continuous Shot for group image playback. 1. Press the button to enter playback screen. 2. Press the [ 3. Press the ]/[ ] button to select continuous group. button to start playback. 0000/00/00 000-0000 0000/00/00 000-0000 0000 00 00 00 00 Thumbnail3x3 Cont.
PAGE 76
Animation panorama play Panoramic animation playing is to play full size image in accordance with the shooting direction. After playing, it will automatically return to the static screen of panoramic image. 1. Press the 2. Press the [ 3. Press the button to enter playback screen. ]/[ ] button to select animated panoramic photos. button to play in selected shooting direction.
PAGE 77
Slideshow This setting allows you to view all the stored images as a slideshow. 1. Press the screen. button to enter playback 2. Rotate the zoom lever counter to the position to display thumbnails 3x3 and then press the button to select the index mode. Slide Show Back 3. Press the [ ]/[ ] button to select slideshow playing and then press the button to enter slide option. 76 4. Press the [ ]/[ ] button to select play effect and then press the button to confirm.
PAGE 78
Photos and Video Deletion In playback mode, press the [ ] button to delete your photos and videos. To delete photos or videos: 1. Press the 2. Press the [ 3. Press the [ button to switch to playback mode. ]/[ ] button to select the photos or videos to be deleted. ] button and the deletion screen is displayed. 4. Press the [ ]/[ button to confirm. ] button to select 「Delete One」or「Exit」and press the Erased photos/video clips cannot be recovered.
PAGE 79
USING THE MENUS Shooting Menu Mode: 1. In shooting mode, press the to enter the shooting menu.
PAGE 80
Expo Metering OIS (Optical Image Stabilization) Use this setting to select the “target” size of the camera’s field of view to be metered. This mode can help reduce photo blur caused by unintentional hand shake, or low light. OIS: On Expo Metering: AiAE • Spot For metering the block displayed in the center of the screen. • Center For metering the object in the center of the screen.
PAGE 81
Beautifier Select Scene Set the effect of the face beautifier mode. Select the scene mode under the SCN mode. Beautifier:Effect 1 Select Scene Skin Soften .
PAGE 82
Shoot Setting1 Mode: 1. Press the button, press the [ [ ] button to select . 2. Press the ]/ button to enter the menu. 3. Press the [ . ]/[ ] button to select 6 options in [ Shoot Settings 1 ]: 4. Press the [ ]/[ ] button to select the item to be set and press the button to enter the menu. 5. Press the [ ]/[ ] button to select an option and press the button to confirm.
PAGE 83
Image Size The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image quality.
PAGE 84
Movie Size Set the image resolution used during video recording. Movie Size Image Size 20M Movie Size 1920x1080 30fps 1920x1080 30fps 1280x720 60fps Quality Qualit JPG G Fine 1280x720 30fps MF Assist As Off AF Assist Beam As Off 640x480 30fps 640x360 120fps Digital Digita Zoom Select Se Off Set Exit Total time of video recorded for each setting: No.
PAGE 85
Quality When recording in higher pixel resolutions for extended periods of time, this can cause the camera to generate heat. This is not a camera malfunction. When the video format is set as 640x360 (120fps), shooting time is 30 seconds, playback time is 2 minutes. The quality setting can be used to adjust the image compression ratio.
PAGE 86
If RAW or RAW+JPG is selected, the settings of Colour Effect, Continuous Shot, Cont.Shot-Fast (2M), Cont.ShotHigh Speed (VGA), HDR and AE Bracketing cannot be adjusted. 00:00:00 0000 The RAW file format provides lossless compression of the image data, which is not processed by the camera. The RAW file may be opened and modified using the image processing software, PhotoStudio Darkroom, that is located on the CD-ROM included with this camera. PhotoStudio Darkroom supports Windows 7/8/10 and Mac OS X (V10.
PAGE 87
AF Assist Beam Digital Zoom In a darker environment, AF assist beam can be turned on for better focus. This setting is for adjusting digital zoom. If this function is disabled, only optical zoom can be used.
PAGE 88
Shoot Setting 2 Mode: 1. Press the [ ]/[ button, press the ] button to select 2. Press the button to enter the menu. 3. Press the [ select . ]/[ ] button to 6 options in [ Shoot Settings 2 ]: . 4. Press the [ ]/[ ] button to select the item to be set and press the button to enter the menu. 5. Press the [ ]/[ ] button to select an option and press the button to confirm. • Date Imprint • Quick Review • Cont.
PAGE 89
Date Imprint Quick Review Include a Date/Time stamp on the photo image. This option enables a brief review of images immediately after capture. Each picture will be displayed on the LCD per the selections below. Date Imprint Date Imprint Off Quick Review Off Cont. AF Off Face Detection On Off Date Date/Time Off Quick Review Off Cont.
PAGE 90
Cont. AF Face Detection Enable the continuous AF to be able to continuously focus automatically when taking pictures. For detecting and focusing on faces to make all faces as clear as possible in photo mode. Face Detection Cont. AF Date Imprint Off Date Imprint Off Quick Review Off Quick Review Off Cont. AF Off Cont.
PAGE 91
Custom Settings 2. Press the shutter button half-way down to focus. The LCD will show a green focus frame when the subject is in focus. Custom Settings stores the current photo shooting mode and its parameters. The stored mode and parameters are directly invoked in Custom Settings mode. Custom Settings Set camera to user custom mode No Yes F2.9 1/50 3. Press the shutter button all the way down to take pictures. The closed eyes detection is usually on.
PAGE 92
Function Ring (Smart) The options listed below can be set as Function Ring (Smart) Custom. Once set, the chosen function can be quickly adjusted with the lens function ring during shooting. Function Ring (Smart) Date Imprint Normal Off Quick Review Aperture priority Off Cont.
PAGE 93
Playback Menu Menu Mode: 1. Press the button to display the playback screen and press the button to enter the menu. 7 options in [ Playback Menu ]: • Menu • Display Mode • Rotate • Color • HDR • Touch-up • Resize 2. Press the [ ]/[ ] button to select the playback to be set and press the button to enter. 3. Press the [ ]/[ ] button to select an option and press the button to confirm. Refer to the following pages for more details about each setting.
PAGE 94
Display Mode Rotate You can use this setting to change the orientation of the picture. Date Folder Date Mode: Arranged by date. Exit Back Normal Mode: Display all images. Date Mode: Arranged by date. : Exit Cont. Photo Mode: Arranged by Cont. Photo Group. : Turn Left Slide Show : Turn Right The Date Folder is displayed in date order based on photo shooting date/ time. If there is no continuous shot image file in memory, continuous photo mode cannot be enabled.
PAGE 95
Color This setting allows you to change the picture color effect. The file is saved as a new photo and stored in memory together with the original photo.
PAGE 96
HDR With the HDR function, pictures that are overexposed may be corrected to optimize the highlights and lowlights captured to more accurately represent the actual scene. Exit : Exit Select with HDR : 0000/00/00 000-0000 Thumbnail3x3 After using the HDR function, the image will be saved as a new file and the original file is still stored in the memory.
PAGE 97
Touch-up The playback beauty feature allows for beautification using three individual effects. Select with touch-up: 0000/00/00 000-0000 Exit Thumbnail3x3 : Exit : Red-Eye Reduction : Skin Soften : Eye Brightening : Eye Enlargement Using the face beautifier mode allows you to select from single, two, or all three effects combined.
PAGE 98
Playback Settings Resize This setting allows you to resize a picture to a particular resolution and saves it as a new picture. Mode: 1. Press the [ ]/[ button, press the ] button to select 2. Press the button to enter the menu. 3. Press the [ select . Exit ]/[ . ] button to 5 options in [ Playback Settings ]: • Protect • Delete • DPOF : Exit : Resize to 1024x768 : Resize to 640X480 Only for adjusting pictures with high resolution to those with low resolution.
PAGE 99
Protect Delete To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. You can delete one or all photo/video files. Protect Protec One Protect Delete Delete Date Folder One Date Folder DPOF Cont. Group DPOF Cont.
PAGE 100
The “ ” indicator means a file is protected. File protection must be removed first before a file can be deleted. Deleting files will cause DPOF settings to be reset. When one photo in the Cont. Group and Date Folders is protected, it will be kept but any other photos will be deleted.
PAGE 101
Trim The Trim setting allows you to crop photos and save them as new pictures. 1. Select「Yes」to confirm trim. Toggle the zoom lever or rolling the jog dial to select the aspect ratio and press the [ ]/[ ]/[ ]/[ ] buttons to adjust the part you want to trim. Play Slide Show This setting allows you to view all the stored images as a slideshow. Play Slide Show Protect Prote Delete All Files Still Captures DPOF Videos Trim Cont. Group Play Slide S Show Select Se Yes Back 2.
PAGE 102
General Settings Mode : 1. Press the [ ]/[ button, press the ] button to select 2. Press the button to enter the menu. 3. Press the [ select . ]/[ ] button to 6 options in [ General Settings ] : • Sound Settings • Power Saver . 4. Press the [ ]/[ ] button to select the item to be set and press the button to enter the menu. 5. Press the [ ]/[ ] button to select an option and press the button to confirm. Refer to the following pages for more details about each setting.
PAGE 103
Sound Settings Power Saver With this setting you may adjust the sound volume. This setting allows you to save power and get the maximum possible running time for your camera's batteries. Turn the LCD and camera off automatically after a consecutive period of inactivity. Press the [ ]/[ ] button to adjust the volume and press the button to confirm our setting.
PAGE 104
Language Date & Time Refer to the “Reset your language” section on page 25. Refer to the “Reset Date/Time” section on page 26. World Time LCD Brightness The World Time setting is a useful function for your overseas trips. This feature enables you to display the local time on the LCD while you are abroad. 1. Press the [ ]/[ ] button to select the departure place ( ) and destination ( ) fields. Use this setting to adjust the brightness of your LCD.
PAGE 105
File Settings Mode : 1. Press the [ ]/[ button, press the ] button to select 2. Press the button to enter the menu. 3. Press the [ select . ]/[ ] button to 5 options in [ File Settings ] : • Format • Copy to Card • File Numbering • Reset Settings • Version 104 . 4. Press the [ ]/[ ] button to select the item to be set and press the button to enter the menu. 5. Press the [ ]/[ ] button to select「Yes」or「No」and press the button to confirm.
PAGE 106
Format Please note: formatting enables you to delete all contents in the memory card or built-in memory, including protected photo and movie files. Format Doing so will clear all data. No Yes If you select「Yes」the camera formats its memory. If there is no memory card in the camera, the built-in memory will be formatted; if there is a memory card, it will be formatted only.
PAGE 107
Copy to Card File Numbering Use this setting to copy the files stored in the built-in memory to a memory card. After you take a picture or video clip, the camera will save it with a sequential number. You can use this to reset the file numbering to 1. Copy to Card Copy files from built-in memory to the memory card. File Numbering Create a new directory and reset the file number. No Yes No Yes If there is no card available in the camera, this function will not be displayed.
PAGE 108
Reset Settings Version Use this setting to restore the camera to its original default settings. Use this setting to view the current camera firmware version. Reset Settings Reset camera settings to
PAGE 109
CONNECTION SETTINGS Connecting to a Computer You can use a Micro USB cable to connect the camera and copy (transmit) photos to a computer, printer or other device. 4. Press the [ ]/[ ] button to select「PC」and press the button to confirm. Setting the USB Mode The camera’s Micro USB port can be set to connect with either a computer or a printer. The following steps will allow you to ensure that the camera is correctly configured to connect with a PC. 1.
PAGE 110
Transferring files to your computer The computer will automatically detect the camera as a removable drive. Doubleclick the my computer icon on the desktop to locate the removable drive and to copy folders and files in the drive to a directory on your PC as you would copy any typical folder or file. Follow the steps below to connect the camera to a computer. 1. Make sure the computer is turned on. 2. Connect one end of the supplied Micro USB cable to the Micro USB port on your camera. 3.
PAGE 111
Connecting to a PictBridge Compatible Printer PictBridge technology allows printing of the photos saved in the memory card by the printer. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the owner's manual for specifications. With the PictBridge function on your camera, you can print the captured photos directly to a PictBridge compatible printer using the supplied Micro USB cable, without the need for a PC. 3.
PAGE 112
Connecting to your Printer 1. Make sure the printer is turned on. 2. Connect one end of the supplied Micro USB cable to the Micro USB port on your camera. If the camera is not connected to a PictBridge compatible printer, the following error message will appear on the LCD. 3. Connect the other end of the cable to the USB port on the printer.
PAGE 113
Using the PictBridge Menu After setting the USB mode to printer, the PictBridge menu will appear. PictBridge Print (with Date) Print (without Date) If you have set the date and time on your camera, the date and time will be recorded and saved with each photo you take. 1. In the PictBridge menu, select「Print (with Date)」and the screen as shown below appears.
PAGE 114
Print (without Date) 3. Press the [ ]/[ ] button to select the number of copies for the currently displayed photo. 4. Press the button and the following screen will appear. Use this setting to print the photos without dates on them. 1. In the PictBridge menu, select「Print (without Date)」and the screen as shown below appears. PictBridge Print (With Date) Yes 01 Cancel Back 5. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing. 2.
PAGE 115
Print Index PictBridge Print (Without Date) Yes Cancel 5. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing. You can print all photos in the camera via this function. 1. In the PictBridge menu, select「Print Index」and the screen as shown below appears. PictBridge Print Index Yes Cancel 2. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing.
PAGE 116
Print DPOF Images Exit To use DPOF printing, you must select your photos for printing using the DPOF settings beforehand. See “DPOF” section on page 99. Select「Exit」to exit the PictBridge menu. At this time, the message「Remove USB Cable!」appears on the screen. 1. In the PictBridge menu, select「Print DPOF Images」and the screen as shown below appears. PictBridge Remove USB Cable! Print DPOF Images Yes Cancel Disconnect the Micro USB cable from the camera and printer. 2.
PAGE 117
Video System You can use the AV cable (which should be purchased separately) to connect the camera and the television for realizing the video output. Connect one end of the AV cable to AV port of the camera, connect the other end to AV-OUT port of the television. Adjust the format of the video output system according to your requirements, and the steps are as follows: 1. Press the button, press the [ ]/[ ] button to select and press the button to enter the menu. 2. Press the [ . ]/[ ] button to select 3.
PAGE 118
Supported HDMI Connections HDMI (High Definition Multimedia Interface), is a fully digital audio/video transmission interface, through which uncompressed audio and video signals are transmitted. Connecting HDMI-Ready TV 1. Use the cable with high resolution output terminal (which should be purchased separately) to connect the camera to the television which meets HDMI standard. 2. The camera will be automatically detected by the TV. 3. After connecting via HDMI, the camera enters Playback Mode.
PAGE 119
HDMI CEC Control After connecting the camera with TVSystem, you may view pictures taken with the camera on the TV screen and operate the camera with your TV remote control to view and edit all images. Introduction on Icons 1. Info Hiding/Display 2. Zoom-in : Zoom in Images HDMI CEC Control USB Mode M Off PC TV-Sy TV-System NTSC On HDMI CEC Control Off : Zoom out Images 3. Rotate Images : Only Turn Left 4.
PAGE 120
8. Videos 9. Movie Length:00:00:00 10. Cont. Group File 11. First Image Mark The following operations are available during HDMI CEC playback: • 1:1 Single Playback • Zoom-in Playback • Rotate 12. 000/000:Current Sorting/Total Number of Images in Group • Index Playback 13. :Confirm Effect • Slide Show Playback 14. :No Change • Video Play • Cont.
PAGE 121
120 1:1 Single Playback: Pressing the left and right arrow buttons can switch among images. Zoom-in Playback: Under the 1:1 single playback mode, press the red button to zoom in images; press the red and green buttons on remote control to zoom out images. Rotate: Under the 1:1 single playback mode, press the blue button to rotate single picture.
PAGE 122
Video Play: Press the down arrow button to delete one picture. Under the 1:1 single playback mode, select a video and then press the Press the left and right arrow buttons central button to start playing. While to edit the color. 12 effects in total for playing, you may use the arrow buttons selection. and the central button to perform The following beautifier touch-up operations such as fast forward/ functions cannot be enabled until a backward, pause, frame forward/ face is detected.
PAGE 123
HDMI CEC Connection Function Full Size Playback Zoom-in Playback Index Playback Video Play Cont.
PAGE 124
Set Eye-Fi Card Connection Mode This camera supports wireless connection for Eye-Fi memory cards. Enable the Eye-Fi connection by following the steps below. 1. Press the button, press the [ ]/[ ] button to select and press the button to enter the menu. 2. Press the [ select . ]/[ ] button to 3. Press the [ ]/[ ] button to select「Eye-Fi」and press the button to enter the menu. 4. Press the [ ]/[ ] button to select「On」or「Off」and press the button to confirm.
PAGE 125
APPENDICES Product Specifications Design and specifications are subject to change without notice. Type Image Effective Pixels Sensor Total Pixels Lens 20.68 Megapixels 21.14 Megapixels Focal Length 3.9mm (Wide) — 351mm (Tele) 35mm film equivalent 22mm (Wide) — 1980mm (Tele) F number F3.1 (Wide) — F6.8 (Tele) Lens Construction 14 groups 18 elements Optical Zoom 90x Focusing Range 124 1/2.
PAGE 126
(4:3) Number of Recording Pixels Still Image Movie Image Compression (3:2) 20MP: 5184×3888 18MP: 5184×3456 10MP: 3648×2736 5MP: 2592×1944 3MP: 2048×1536 0.3MP: 640×480 (16:9) 15MP: 5120×2880 2MP: 1920×1080 1920×1080 (30fps), 1280×720 (60fps), 1280×720 (30fps), 640×480 (30fps), High-Speed Movie: 640×360 (120fps) Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format Still Image JPEG (Best, Fine), RAW, RAW+ JPEG (Best) Movie MOV [Image: H.
PAGE 127
HDR Yes Scan Panorama Up to 360° LCD 126 Display 3.
PAGE 128
White Balance Control Flash AWB, Daylight, Cloudy, Fluorescent, Fluorescent H, Incandescent, Manual WB, Color Temp. (1900K ~ 10000K) Flash Method Pop-up (Auto) Flash Modes Force Off, Fill Flash, Flash Auto, Red-Eye Reduction, Slow Sync., Slow Sync. + Red-Eye Reduction Internal Memory: Approx. 8MB Recording Media SD/SDHC Card (Up to 32GB Support) [MMC Card Not Supported ] Multi-Language Support 27 Languages Jacks AV-OUT/USB 2.
PAGE 129
Prompts and Warning Messages Message 128 Description Action Warning! Battery exhausted. Warning before power off when the camera battery is exhausted. Displaying that it will power off after 2 seconds. Built-in memory error! In the case of built-in memory error. Disappear after 2 seconds and return to shooting. Warning! Do not turn off your camera during update! The message appears during the firmware update process. The message disappears after the camera update and restart.
PAGE 130
Message Description Action Cannot change settings under this mode. Appears during shooting mode if a function can not be set by rotating the function ring. Remove the message after 2 seconds and return to shooting. Improper alignment. Please try again. The offset is too big for panorama shooting. Remove the message after 2 seconds and return to shooting. Connection Failed! In the case of failing to connect to a PC or a printer.
PAGE 131
Message Description Action Write Protect ! In the case that there is lock protection for the card when saving the image. Disappear after 2 seconds and return to the previous image. Card Full ! In the case that the camera detects the card capacity is insufficient when turning on or pressing the shutter. Disappear after 2 seconds and return to the previous image. Memory Full ! In the case that the camera detects the memory capacity is insufficient when turning on or pressing the shutter.
PAGE 132
Message Slow access Description Action When a card lower than Class 4 is recording movie above HD, it may be accessed slowly and the recording cannot be continued. Remove the message after 2 seconds and return to the shooting image. The recording cannot be continued if there are problems which may cause Cannot write to SD Disappear after 2 seconds interruption of the recording during card. and return to shooting. writing to the card or recording in the process of shooting or recording.
PAGE 133
Message 132 Description Action Too many pictures for fast processing. The image may be unable to enter the date playback if the image exceeds the specification in the case of date playback. Remove the message after 2 seconds and return to Thumbnail 3x3 mode. Unable to recognize files. When the format of the file viewed is not supported or the file is damaged and cannot be recognized properly. This image message disappears only after the file is deleted.
PAGE 134
Troubleshooting Problem Camera does not turn on Camera turns off suddenly during operation The picture is blurred Images and video files cannot be saved Images will not print from the connected printer Saving data to memory card is slow Possible causes The battery has been depleted. The battery is not inserted correctly. The batteries have been depleted. Camera shakes while taking a picture. The memory card is full. The memory card is locked. The camera is not connected to the printer correctly.
PAGE 135
Problem Possible Causes Solution Cannot write to the memory card The memory card has been locked. Release the write lock of the memory card or replace with another card. Too many movies to process The number of pictures or folders in the memory card exceed the specifications, so the playback of data folder can not be displayed. Delete unwanted files.
PAGE 136
The Kodak and Kodachrome, Kodacolor and Ektachrome trademarks, logo and trade dress are under license from Kodak. © 2017 JK Imaging Ltd. All Rights Reserved. JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA JK Imaging Europe, 71 Clarendon Road, Watford, WD17 1DS, UK kodakpixpro.com Made in Myanmar Ver.31 Ver.