User’s Guide Hereby, Kodak Alaris Inc., declares that this Digital Photo Printer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
INFORMATION This Class A digital apparatus complies with Canadian ICES-003. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: NOTE: WARNING: TROUBLESHOOTING In the USA or Canada, use the AC power cord according to the recommendations as below, in order to comply with UL60950-1 and CAN/CSA C22.2 No. 60950-1-03. Connect to the 120 V receptacle of the room or the host equipment. The AC power cord should be UL or CSA approved and consist of type SVT, size 16 or 18AWG, length 2 m or shorter cord with IEC60320-1/C13 type, 125 V 10 A or higher rating connector and NEMA 5-15 type, 125 V 10 A or higher rating plug.
CONTENTS PRECAUTIONS CONTENTS FEATURES Contents..................................................................................................1 Safety precautions...................................................................................2-4 Special features.......................................................................................5 Unpacking...............................................................................................6 Features and functions.......................
SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT PRECAUTIONS The Kodak 305 Photo Printer is designed to operate on 120 V AC 50/60 Hz in the U.S.A. and Canada, and 220 V - 240 V AC 50/60 Hz in Europe. Never connect to any outlet or power supply having a different voltage or frequency. WARNING : THIS APPARATUS MUST BE EARTHED. PROTECTIVE MEASURES IF ABNORMALITIES ARISE, .....
SAFETY PRECAUTIONS DO NOT LEAVE THE PRINTING UNIT OPEN When the printer is moved with the printing unit open, it may cause injury or damage. PRECAUTIONS CLOSE THE PRINTING UNIT FIRMLY Take care not to pinch your hand when closing the printing unit. When the printing unit is not closed firmly, it may open during transportation and it may cause injury or damage.
SAFETY PRECAUTIONS OTHER CAUTIONS PRECAUTIONS Do not pull out nor touch the print paper until printing is completed. It may degrade the print quality or cause an error. • Dust or other foreign matter adhering to the print paper or the ribbon cassette, or deformation resulting from exposure to extremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images.
SPECIAL FEATURES SPECIAL FEATURES PRECAUTIONS AVAILABLE 2 PRINT SIZES 2 printing sizes, 10x15 (4x6”) (max. 102 x 152 mm) and 15x20 (6x8”) (max. 152 x 203 mm) are selectable. 300 DPI HIGH RESOLUTION The Kodak 305 Photo Printer has a high resolution of 300 dpi for precise illustrations and sharp photographic images. LARGE CAPACITY PRINTING HIGH QUALITY PRINTS The Kodak 305 Photo Printer is a dye sublimation thermal transfer color printer, which produces superior high quality images.
UNPACKING UNPACKING Open the printer box from the top and remove the top cushion containing the accessories out of the box. Protective cardboard Accessories FEATURES Remove the protective cardboard and then take the accessories out of the cushion. Carefully pull the printer up and out of the box. Pull the printer straight up as shown in the figure. PREPARATION NOTE Printer weighs about 12 kg. Handle it with care. Unwrap the packing.
FEATURES AND FUNCTIONS FRONT PANEL PRECAUTIONS 6 5 4 3 FEATURES 2 7 1 8 PREPARATION 9 8 Holds the paper strips generated by margin cut. Empty the tray frequently to prevent jamming the strips at the print outlet. OPEN BUTTON ( ) Press to release the printing unit out. PRINTING UNIT CONNECTOR COVER Open to load print paper or ribbon. Press the button to release the printing unit. Do not open the cover during normal use. ALARM INDICATOR ( ) OPEN DOOR Open the door to mount print paper.
FEATURES AND FUNCTIONS TRIM TRAY PAPER TRAY 1 Engage the upper hooks of the tray on the protrusions on the top of the margin cut box (1). Then, secure the tray by engaging the lower hooks in the holes on both sides of the box (2). 2 PRECAUTIONS Hook and pull up the trim tray to attach it firmly. Hold and pull the handle on the lower part of trim tray to remove. 1 FEATURES 2 REAR PANEL PREPARATION 5 4 TROUBLESHOOTING 3 2 1 POWER SOCKET (AC LINE) Use to connect the provided power cord.
BEFORE OPERATION PRINTER SETUP PROCEDURE PRECAUTIONS Before printing, follow the printer setup listed below. (See pages 10 to 11.) Install the ribbon to this printer. (See pages 12 to 13.) (See page 15.) PREPARATION Connect the printer to a personal computer. FEATURES Install the print paper to this printer. Make sure to close the printing unit when the setup procedure is completed.
BEFORE OPERATION PRINT PAPER INSTALLATION PRECAUTIONS Attach the supplied paper flanges to both sides of the print paper. When you pinch the latches on the paper flange, the stoppers retract into the shaft. Attach the flanges to the print paper with the stoppers retracted. Make sure that the flanges are attached to the print paper securely, and release the latches. • CAUTION When placing the print paper, keep the print paper upright. When you put the print paper sideways, it may roll and fall.