BTKEYBOARD CASE FOR IPHONE USER’S MANUAL Model: HSIPN4KBCS,HS-IPN5KBCS FCC ID: YH5HSIPN4KBCS
Step I Step II Place Your Iphone into the case Pair (Connect) Your Iphone with the Keyboard Note: This step is only needed when you first use this keyboard case Turn on your Iphone and tap “setting”
Tap “General” And find the “Bluetooth” option
Slide the Bluetooth button to “On” and your Iphone will start to search Bluetooth devices
You should turn the switch in the keyboard to “on” position And active the Bluetooth button with a little stick
Then the Bluetooth signal light on the left top of the keyboard will be on Now, your Iphone will find this Bluetooth keyboard
Then you should tap “ Bluetooth Keyboard” option, then a blue window with a password will come out Enter the password on the Bluetooth keyboard then press the “Enter” key, then
your Iphone is successfully paired(connected) with the Bluetooth keyboard Step III Start to use the keyboard You can write message, notes and email with this keyboard instead of the
touching keyboard on your Iphone However, you can press “fn” + “the key with keyboard symbol” at the same time to get the touching keyboard back.
left top of some keys z Press the “fn” key at the same time if you want to type the blue symbols on the left top of some other keys Technical Specification Of The Product: Bluetooth Specification： Version 2.0 Operation Current： 3mA Standby Current: 0.2mA Operation Voltage： 3.
Battery Type: Charging period： Duration of Charged battery: 500mAh Lithium Battery 4hours （For the first time, please charge for 12 hours） 45 days: Trouble Shooting： If you are unable to connect the keyboard to your Iphone, please try the following: z Check if the battery is low. When the battery is low, some keys will react slowly and even don’t work. Then, you should charge the battery. z Check the power switch, make sure it is on.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
RF Exposure Information: FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for user is 1.549W/kg. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules.
