ITEM #0623439 80 V STRING TRIMMER MODEL #KST 140XB-06 Français p. 22 KOBALT® and the K Design® are registered trademarks of LF, LLC. All Rights Reserved. Español p. 43 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Friday. kobalttools.
TABLE OF CONTENTS Product Specifications........................................................................................................... 2 Package Contents................................................................................................................. 3 Hardware Contents............................................................................................................... 4 Symbols............................................................................................
PACKAGE CONTENTS A C I B J P D F U T Q E R L M N O H K G S PART A B C D E F G H I J K L DESCRIPTION Battery Trigger switch Side lock button Power button Front/Auxiliary handle Coupler Cut-off blade Guard Charger Tube Lower tube Spool cover (preassembled to spool housing) QUANTITY 1 1 1 1 1 1 1 1 1 1 1 1 PART DESCRIPTION M Spool (preassembled to spool housing) N Spool cap (preassembled to spool housing) O Spool housing P Speed control button Q Release button R Positioning hole S Trimmer line T
HARDWARE CONTENTS (not shown actual size) AA Screw (preassembled to the Guard (H)) BB CC Fastening knob Bolt Qty. 1 Qty. 1 Qty. 4 kobalttools.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. SYMBOLS V A Hz W min no /min DESIGNATION EXPLANATION Volts Amperes Hertz Watts Minutes Alternating Current Direct Current Voltage Current Frequency (cycles per second) Power Time Type of current Type or a characteristic of current Class II Construction Double-insulated construction No Load Speed Rational speed, at no load Revolutions, strokes, surface speed, orbits, etc., per minute.
SYMBOLS Save these Instructions The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING an imminently hazardous situation, which, if not avoided, will DANGER Indicates result in death or serious injury. a potentially hazardous situation, which, if not avoided, could WARNING Indicates result in death or serious injury.
SAFETY INFORMATION WARNING Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite the dust or fumes. • Do not allow children or untrained individuals to use this unit. • Don’t expose power tools to rain or wet conditions.
SAFETY INFORMATION • When not in use, the string trimmer should be stored indoors in a dry, locked place out of the reach of children. • Do not dispose of the batteries in a fire. The cell may explode. Check with local codes for possible special disposal instructions. Do not open or damage the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. Do not place battery tools or their batteries near fire or heat.
SAFETY INFORMATION Child safety Tragic accidents can occur if the operator is not aware of the presence of children. • Keep children out of the working area and under the watchful care of a responsible adult. • Do not allow children under the age of 14 to operate this trimmer. Children who are 14 years of age or older must read and understand the operating instructions and safety rules in this manual and must be trained and supervised by a parent.
ASSEMBLY INSTRUCTIONS WARNING To avoid injury and to reduce the risk of electrical shock or fire: • Replace the battery or charger immediately if the battery case or charger cord is damaged. • Always make sure the string trimmer switch is OFF before inserting or removing the battery. • Always make sure the battery is removed and the switch turned OFF before inspecting, adjusting, or maintaining any other part of the string trimmer. • Read, understand, and follow the Battery Charger instructions. 1.
ASSEMBLY INSTRUCTIONS WARNING To avoid injury, adjust the auxiliary handle for optimum control and balance. Do not overreach when operating string trimmer. Keep proper balance at all times for better control of the tool in unexpected situations. 2. Front handle a. Position the front/auxiliary handle (E) onto the upper portion of the trimmer section by sliding over the rubber sleeve (J). 2 BB b.
Attachment compatibilities This 80-volt powerhead is compatible with universal gas attachments. WARNING This string trimmer is not meant to be used with brush cutter attachments. Use of a brush cutter attachment could cause serious personal injuries or property damage. 4. 4 Cutting line on the string trimmer. When the cutting line needs replacing, rewind the spool (M) with 0.080 in. trimmer line (not included).
ASSEMBLY INSTRUCTIONS 5. Replacing the line a. If necessary, remove any old trimmer line from the cutting head. See the Removing old trimmer line section on Page 14. b. Turn the spool cap (N) until the slots on the spool cap and spool cover (L) are aligned. 5 L Slots N c. Cut 15 ft. of new 0.080 in. monofilament trimmer line. d. Insert the trimmer line into the eyelet. Push the trimmer line until a few inches protrude from the other eyelet. e.
ASSEMBLY INSTRUCTIONS 6. Removing old trimmer line a. Firmly press in the tabs on each side of the spool cover (L). b. Remove the spool cover from the spool housing (O). 6 L Tabs c. Remove any excess trimmer line (S) or obstructions from the spool (M). d. Use a clean cloth to wipe away any debris from the spool (M), spool cover (L), or spool housing (O). O L e. Tabs N Align the tabs of the spool cover (L) with the posts on the spool housing (O).
ASSEMBLY INSTRUCTIONS 7. Removing the spool from the trimmer a. 8. Turn the spool head, while looking through the hole next to the gear box. Line up the hole and the slot inside the gear box. b. Insert a small screwdriver or metal rod (not included) into the hole next to the gear box. c. Rotate the spool clockwise until the spool is removed. Adjusting the cutting swath The trimmer is currently set at a 14 in. cutting swath. To adjust to a cutting swath of 16 in.: a.
ASSEMBLY INSTRUCTIONS 9b. To remove: a. Press the battery release button (Q) on the string trimmer. This will cause the battery to raise out of the tool slightly. b. Grasp the trimmer firmly and pull the battery out of the handle. Note: The battery fits into the handle snugly in order to prevent accidental dislodging. WARNING: Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire: • Replace the battery immediately if the battery case is damaged.
OPERATING INSTRUCTIONS 1. To turn on/off: a. Press the power button (D) located on the trimmer handle. b. Press the side lock button (C). This will make the trigger switch (B) operational. c. Press and hold the trigger switch (B) for continued operation. To stop the string trimmer: a. Release the trigger switch (B). 1 D B C CAUTION: Always allow 5 seconds or more for the cutting line spool to stop rotating after releasing the trigger switch.
OPERATING INSTRUCTIONS During use: • Trim only when the grass and weeds are dry. • Do not trim grass at night. Always make sure you have adequate lighting. • Hold the string trimmer by both the switch handle and the auxiliary handle for best control and balance. • Stand with the cutting head tipped down at an angle in front, guiding the string trimmer in a semicircular motion around you. • If possible, guide the string trimmer to the left to cut.
CARE AND MAINTENANCE 2. Clean line cutter blades by using a wire brush and spraying with an appropriate degreaser. 3. Inspect spool and line to ensure that there is an adequate amount of line and that no damage is present to the spool. Storage tips: • Do not store the string trimmer in sunlight, in an excessively warm place, or near a furnace. The battery life will be shortened.
WARRANTY 5-YEAR HASSLE-FREE WARRANTY This 80 V String Trimmer is warranted to the original purchaser from the original purchase date for five (5) years subject to the warranty coverage described herein. This 80 V String Trimmer is warranted for the original user to be free from defects in material and workmanship.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Friday. BB CC PART BB CC E H T E DESCRIPTION Fastening knob Bolt Auxiliary handle Guard Attachment knob H T PART # 34113877-1 322051410 341081410 341041410 341061410 Printed in China KOBALT® and the K Design® are registered trademarks of LF, LLC. All Rights Reserved. kobalttools.