User's Manual
5. Ways to take off the mobile phone: The 1st way: when the
power is on, press the mechanical side buttons, the clamp
arms will open automatically, remove the mobile phone, and
the arms stay open; The 2nd way: press the side buttons when
the power is off, with a built-in supercapacitor, the clamp arms
open automatically, then remove the mobile phone, the clamp
arms remain open.
*1
*1
*1
*1
FCC Warning
FCC WPT exposure statement:
Precautions
The guarantee
Products three guarantees valid time:From purchasing date (Prevail to
the customer receipt date or invoice date),provide 12 months guarantee.Prod-
uct surface man-made damage,acces sories missed are not include in this
guarantee.We can also provide the service for you for the product is out of
surface or doesn’t include in this charge.guarantee,but you need to pay the
repair charge.
1. Do not use the product in the car at a temperature above 60 degrees.
2.Do not use this product in professional racing or extreme off-road driving.
Air vent mount
Package
Specifications
Direction for use
1. Assemble the product and any accessory through a ball head
nut and tighten it (compatible with other ball head diameter
17mm accessories), and fix it in an ideal position. Connect the
product to the QC3.0 car charger (optional) with the data cable,
and insert to the cigarette lighter to get electricity.
2.After the product is powered on, the indicator on the both
side will light, and the left and right telescopic arms will
automatically open after 5 seconds to wait for the mobile phone
to be placed; if the product does not turn on red after power on
(not turn on, or flash ) All indicate that there is a problem with
the product, please stop using it and return it to the seller for
processing.
3. In order to ensure the efficiency and stability of charging,
adjust the bottom bracket to the lowest position before putting
on the Samsung Galaxy Z Flip phone, so that the coil of the
phone can be perfectly aligned with the lower charging coil of
the holder; Other mobile phones with wireless charging function
can also use this stand to charge, try to make the back center
position be aligned with the circle of the bracket panel as much
as possible. Mobile phones of different sizes should correspond
to different bracket gears. The best distance for wireless
charging is within 3~5mm and cannot penetrate metal, so avoid
using metallic or too thick (more than 3mm) mobile phone
cases, so as to ensure the fast wireless charging.
4. After placing the phone, the left and right clamping arms will
automatically clamp the phone. If the phone supports QI wireless
charging protocol, the product will start wireless charging at the
same time, and the indicator light will flash slowly when the
product wireless charging starts; if the phone does not support
wireless charging, the indicator light will flash quickly for 5
seconds and then the light goes out. The maximum charging
power of this product is 15W, and the charging efficiency will
vary according to the charging environment and mobile phone.
Functional component
Wireless charger Air vent mount
Type-C cable User manual
Product name: Wireless car charger holder
Model name:X1PRO
Input: 5V/2A MAX，9V/2A MAX
Output: 15W(compatible with 10W,7.5W,5W)
Induction distance:≤6mm
Applicable mobile phone size: 4.7-6.9 inch mobile phone
Adjust the position of the top piece of the air outlet and
the rotatable clip assembly according to the position of the air
outlet blade; insert the blade and select the lock switch
position according to the thickness of the blade; suitable for
one-key locking of the air outlet of most cars. Silicone touches
the car, tighter and fits better to protect the car from
scratches.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
The equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance between 20cm
the radiator your body.
X1PRO
Dual Coil Version