User's Manual
根据出风口叶片位置调整好出风口顶片和可旋转夹子组件的位置；插入叶片，
根据叶片厚度选择锁紧开关档位；适用于大部分汽车出风口一键锁紧。硅胶
接触汽车，更紧更贴合更好保护汽车不刮伤。
温馨提示：
以上小型圆形款式的出风口,夹子不能适配。
无线充电器 出风口夹子
Type-C充电线 说明书
*1 *1
*1 *1
球头螺帽
出风口夹
磁吸和线圈位置
发光灯
Type-C 充电接口
产品名称：MG6 磁吸无线充车载支架
输入要求：QC3.0车充适配器
输出功率：5W/7.5W/10W/15W(MAX)
充电距离：≤6mm
适用手机：iPhone 12 或 兼容iPhone 12磁圈手机
本产品三包有效期：自购买日起（以寄回的客户回执或购机发票日期为准），提供12
个月保修服务，其它附件（如包装等）不属三包范围，产品外观为人为损坏，附件损
失，不在三包之列。不在三包之内或超过三包期的产品，客户仍享受维修服务，但需
要交纳维修工本费。
1、请勿在车内60摄氏度以上高温条件下使用本产品。
2、请勿在专业赛车或汽车极限越野时使用该产品。
MG6 USER MANUAL
Package
Functional component
Wireless charger Air vent mount
Type-C cable User manual
*1
*1
*1
*1
Specifications
Air vent mount
Adjust the position of the top piece of the air outlet and the rotatable clip
assembly according to the position of the air outlet blade; insert the blade
and select the lock switch position according to the thickness of the blade;
suitable for one-key locking of the air outlet of most cars. Silicone touches
the car, tighter and fits better to protect the car from scratches.
MG6 使用说明书
通过旋转调节夹子开合
上下挡片
深入出风口内部夹片
万向旋转球头
Adjust the clip opening
and closing by rotating.
Upper and lower
support plate
A clip that goes deep into
the air vent.
A ball head that can be
rotated at will.
尊敬的用户：
感谢您购买本产品，为了确保您获得可靠的售后服务，请认真阅读以下说明：
1、把该产品与配件通过球头螺帽装配并旋紧（可兼容其他球头直径17mm配
件），并固定在理想位置。用数据线把产品与QC3.0车充（选配）连接，
并插入点烟器取电。
2、
该产品通电后，指示灯会常亮等待放置手机；放上手机后磁吸力自动吸
住手机，且线圈对准。产品会启动无线充电，指示灯呈呼吸效果；如果
手机不支持无线充电或者检测到金属异物，指示灯闪烁5秒后灯灭。
本
产品最大充电功率为15W，充电效率根据充电环境和手机会有所不同。
3、
无线充的最佳距离是3~5mm以内并不能穿透金属，所以需要避免用金属的
或太厚的（大于3mm）手机保护壳，这样才能保证手机快速的无线充电。
4、从产品上取下手机后，指示灯即刻常亮待机状态。停车熄火，产品停止
供电时，指示灯熄灭，手机依旧被磁力吸附在产品上,可随时取下。
Direction for use
1.Assemble and tighten the product and the accessories through the ball
head nut (compatible with other ball head diameter 17mm accessories),
and fix in the ideal position. Connect the product with a QC3.0 car
charger (optional) with the data cable, and plug in the cigarette lighter to
take power.
2.After the product is powered on, the indicator light will turn on
and wait for the phone to be placed. After placed the phone,
the magnetic suction force automatically absorbs the phone, and the coil
is aligned. The product will start wireless charging, the indicator light is
on for breathing effect; If the phone doesn't support wireless charging
or if it detects a metal foreign object, the light flashes alternately for 5
seconds and then goes off. The maximum charging power of this product
is 15W, and the charging efficiency will vary according to the charging
environment and mobile phone.
3.The best distance of wireless charging is within 3-5mm, and it cannot
penetrate metal, so it is necessary to avoidusing metal or too thick (over
3mm) mobile phone case, so as to ensure fast wireless charging of mobile
phone.
4.After the phone is removed from the product, the indicator will
immediately show the standby status . When the car engined off and the
power supply stops, the indicator light goes off. The mobile phone is still
attached to the product by magnetic force and can be taken off at any
time.
Dear user: Thank you for purchasing this product. In order to ensure that
you get reliable after-sales service, please read the following instructions
carefully.
Screw Cap
Ring Lihgts
Type-c Charging Port
Magnetic suction
and coil position
Air vent mount
Product Name:Magnetic Wireless Car Charger Holder
Model:MG6
Car charger requirements: QC3.0 / 18W+ PD car charger
Input: 5V/2A，9V/2A
Output power: 5W/7.5W/10W/15W(MAX)
Induction distance: ≤6mm
Compatible phones: Please use the original iphone 12/13/14 phone case or
take off the phone case to use or phone case with magnetic ring
-
Precautions
The guarantee
Products three guarantees valid time:From purchasing date (Prevail to
the customer receipt date or invoice date),provide 12 months guarantee.Prod-
uct surface man-made damage,acces sories missed are not include in this
guarantee.We can also provide the service for you for the product is out of
surface or doesn’t include in this charge.guarantee,but you need to pay the
repair charge.
1. Do not use the product in the car at a temperature above 60 degrees.
2.Do not use this product in professional racing or extreme off-road driving.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance between 20cm the radiator your
body.