ITAP User Manual APP INSTALLATION “PAIRING” OF THE iTAP BASIC NAVIGATION FUNCTION OVERVIEW
>> iTAP User Manual Disclaimer: FCC “Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment”. “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” FCC Interference Statement (Part 15.
>> iTAP User Manual FCC/ISED RF Exposure Guidance Statement: “In order to comply with FCC/ISED RF Exposure requirements, this device must be installed to provide at least 2 cm separation from the human body at all times. Afin de se conformer aux exigences d'exposition RF FCC / ISED, cet appareil doit être installé pour fournir au moins 2 cm de séparation du corps humain en tout temps. “ IC “This device complies with Industry Canada licence-exempt RSS standard(s).
>> iTAP User Manual CONTENTS A. Safety and Environmental Guidelines B. Introduction C. Installing the iTAP ‘App’ on a ‘Smartphone’ D. ‘Paring’ of the iTAP ‘App’ to the iTAP ECU E. Basic Navigation F. Function Overview G.
>> iTAP User Manual SAFETY AND ENVIROMENTAL GUIDELINES Note: The safety advice listed below is applicable to general service and diagnostic work on braking systems. Also observe any recommendations from the axle or vehicle manufacturer concerning towing, jacking-up and securing the vehicle. Also observe the following precautions with specific reference to iTAP: Use of mobile phones If an ‘App’ (application) is being used on a mobile phone to monitor a system on the vehicle while it is motion: 1.
>> iTAP User Manual INTRODUCTION iTAP is a means of providing wireless control of certain features of the Bendix TABS-6 Advanced MC brake system on trailers. The iTAP ECU is mounted on the trailer chassis and connected physically to the TABS-6 Advanced MC Brake Module. The iTAP ECU provides the interface for wireless communication with a device having the iTAP App (application software) installed on it.
>> iTAP User Manual INSTALLING THE iTAP APP ON A SMARTPHONE iPhone/iPad/iPod* Firstly ensure that the device is using the operating system iOS9* or higher and you have an iTunes* account. On the device select “App Store” to access the Apple* applications store. In the search window at the top of the screen enter “iTAP Bendix” then press the Enter button. The Bendix iTAP application should appear with the iTAP icon. Select this. The iTAP page will appear giving basic information about the App.
>> iTAP User Manual INSTALLING THE iTAP APP ON A SMARTPHONE Smartphones/Tablets using the Android* operating system Firstly ensure that the device is a model suitable to use Android Apps (Android OS 4 and above) and you have a Google* account. On the device select “Play Store” to access the Google applications store. In the search window at the top of the screen enter “iTAP Bendix” then press the search icon. The Bendix iTAP application should appear with the iTAP icon. Select this.
* Android and Google are trademarks of Google Inc.