Datasheet

Precision Circlip Pliers
to assemble internal circlips into bores
DIN 5256
48
With inserted tips for reliable work
*GCX[FWV[KPEQPVKPWQWUQRGTCVKQPWRVQVKOGU
NQPIGTUGTXKEGNKHGEQORCTGFVQVWTPGFVKRU
> bolted joint: precise, zero backlash operation of pliers
> nonslip plastic coating on the handles
> pliers body: chrome vanadium electric steel, forged, oilhardened
> inserted tips: spring steel wire, drawn
Style 1
DIN 5256 C; straight tips
Style 2
DIN 5256 D; 90° angled tips
Easy and reliable assembly: form-fitting inserted and pressed-in tips
OCFGQHJKIJFGPUKV[URTKPIUVGGNQHHGTCJKIJNGXGNQHRTQVGEVKQP
CICKPUVGZEGUUKXGUVTGUUCPFUVTCKPGIYJGPTGOQXKPIUVWEMTKPIU
The large supporting surfaces and the position of the tips make it
more difficult for the rings to bounce off.
High precision quality
Article No
EAN
003773 mm Style Pliers Handles
Size of bore
Ø mm
Tips
Ø mm
g
48 11 J0 08510 10
1 grey atramentized with nonslip plastic coating
8  13 09 105
48 11 J1 08527 10 12  25 13 105
48 11 J2 0853 180 19  60 18 175
48 11 J3 0851 225 0  100 23 266
48 11 J4 08558 320 85  1032 580
48 21 J01 08619 130
90°
2 grey atramentized with nonslip plastic coating
8  13 09 105
48 21 J11 08633 130 12  25 13 105
48 21 J21 0860 165 19  60 18 175
48 21 J31 08657 210 0  100 23 265
48 21 J41 0866 305 85  10 32 576
Precision and durability
Highdensity spring steel with a scorefree surface is used for the tips
This increases the tips‘ resistance to dynamic and static strain The tips
are 30 % more stable than conventional pliers when subjected to oneoff
overloading while still allowing good accessibility during assembly
Subjected to dynamic strain, the tips‘ resistance capacity is up to 10 times
greater The tips on the precision circlip pliers are nondetachable
Sturdy, inserted tips:
made from highdensity spring steel
Tight fit through compression
48 11 J2
48 21 J21
90°
74
CIRCLIP PLIERS