Specification Sheet

Proﬁle Clearance

.765" + .02" - .01"

19.4mm + .5mm - .3mm

Heavy-Duty

190 lb. Class

3/4" Side Clearance

Max. Drawer Width: 42"

8815 Heavy-Duty

Over Travel Drawer Slide

The 8815 Heavy-Duty Over Travel Drawer Slide is designed to accommodate wider and

heavier drawers for today’s challenging applications in the commercial, residential and

educational markets.

Applications

• Wood residential, commercial and ofﬁce furniture

• Architectural, laboratory and school casework

• Store ﬁxtures, medical carts

• Residential kitchen cabinetry

Speciﬁcations

Model: 8815 Heavy-Duty Over Travel Drawer Slide

Mounting: Side

Disconnect: Butterﬂy Lever Release

Hole Pattern: 32mm and Traditional

Face Frame Mounting: Slide must be blocked out. See Face Frame diagram. Do not

use rear bracket.

Type: Ball-Bearing, Telescopic

Travel: Over Travel

Finish: Zinc Plated

Length: 12", 14", 16", 18", 20", 22", 24", 26", 28"

Clearance: .765" + .02" - .01" on each side

Height: 2.09" [53mm]

Packaging: Bulk Pack (8815B): all sizes - 4 pair per carton

Slide Conﬁguration: Unhanded

Rating

Load: 190 lb.

Max. Drawer Width: 42"

As with all Knape & Vogt drawer slides, the 8815 is designed to meet or exceed

ANSI performance standards as established by BIFMA, BHMA and KCMA.

Hardware

#8 or #10 x 5/8" Phillips Flathead

Warranty

Limited Lifetime Warranty

.765"

[19.4 mm]

2.09"

[53 mm]

PAGE 1
Heavy-Duty 190 lb. Class 3/4" Side Clearance Max. Drawer Width: 42" 8815 Heavy-Duty Over Travel Drawer Slide The 8815 Heavy-Duty Over Travel Drawer Slide is designed to accommodate wider and heavier drawers for today’s challenging applications in the commercial, residential and educational markets. Applications • • • • Wood residential, commercial and office furniture Architectural, laboratory and school casework Store fixtures, medical carts Residential kitchen cabinetry Specifications Profile .
PAGE 2
Charted Information SLIDE LENGTH Face Frame 1.38 35.0 .35 8.9 82° C'SINK X .05 [1.25] DEEP Ø.195 [5] MTG. HOLES .50 12.7 1.38 35.0 .25 6.4 TYP .50 12.7 .39 9.9 TYP .35 8.9 TYP .50 12.7 .45 11.4 TYP .50 12.7 TYP .50 12.7 G H .20 X .38 [5.0 X 9.5] SLOT TYP J .20 5.0 TYP A .21 5.2 TYP 1.00 25.4 F 1.00 25.4 .21 X .38 [5.2 X 9.5] SLOT TYP ACCESS HOLES IN CENTER MEMBER 82° C'SINK X .05 [1.