Contents Important Safety Instructions Unpacking Product Overview Set up the Soundbar Place the Soundbar Troubleshooting Specification Compliance Customer Service Page 1
Important Safety Instructions « A strong impact may cause damage to the internal parts of the product. Use caution to avoid impact. « This product contains small parts which may be a choking hazard. Not suitable for children under age 3. » This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device. « To reduce the risk of fire or electrical shock, do not expose this product train, liquids, or moisture.
Unpacking Carefully unpack the carton and confirm the following parts are included: Package Contents 1. SOUK Soundbar a 2. Remote Control Optical Cal User Guide 6.3.5mm Audio Cable 7. Wall Mount Screws (2) 8.RCA to 3.5mm Audio Cable 9. AAA Battery (2) 10.
Product Overview Front Panel @ Indicator Light #5 & Sound Mode Light Top Panel () Power Button The soundbar will automatically power on when plugged in. Press and hold for 1.5 seconds to power off. Source Button Press twice to adjust the audio input.
Top Panel == Volume Down Press once briefly to decrease the volume by one stop, and the indicator light flashes accordingly once. At minimum volume, the indicator light flashes 3 times in rapid succession. =f Volume Up Press once briefly to increase the volume by one stop, and the indicator light flashes accordingly once. At maximum volume, the indicator light flashes 3 times in rapid succession.
Back Panel & Power Jack ® ® Optical Input eB WB & AUX Input hil & Hanging Holes Bottom Panel Silicone Feet Attention: The film on the silicone pad must be removed at first use. Otherwise, it will affect the stability of the soundbar. Also, the noise will be generated when playing music.
Remote Control Fy © 1. Power Button B® @=8. 2. Bluetooth Mode — 3. Optical Input AUX Input ao ri 5. Prairie Track 6. Play / Pause Next Track mE @m 8. Music Mode Lm 9. Game Mode 10. TV/Movie Mode 11. Volume 12. Volume + 13.
Remote Functions Icon Button Description © Power Button Power on ® Bluetooth Mode @® Optical Input Input Audio Setting AUX AUX Input 4 Previous Track [ Play / Pause Media Playback ow Next Track A Music Mode "0 Game Mode Sound Mode Setting = TV/ Movie Mode © Volume Volume down @ Volume + Volume up © Mute Turn off the Music Attention: « The previous song / next song / play / pause function can only be used in the Bluetooth connection. It cannot be used in optical and AUX input.
Setup Soundbar Connect the Soundbar Before using the product, you need to make sure that the product is properly connected to the power supply. Ste pl: Plug one end of the power cord into the power connector on the back of the SOUK Soundbar. — { A Step: Plug the other end of the power cord into the DC {mains} outlet.
Power On / Off Steppingstone batteries before using the remote control(AAA batteries x 2). Steeplejack the power button on the remote control or top. When you hear the tone [Hi MOUSSAKA, the product enters the power-on state. When the power button is clicked for about 1.5 seconds in the power-on state, a [Goodbye SOUK] tone will be heard to indicate that the power is off.
Bluetooth Connection Stepladder connecting the power, double click the Bluetooth button on the remote control. When you hear the tone [Pairing], enter Bluetooth pairing mode. Step: On your Bluetooth device, tum on the Bluetooth feature. The Bluetooth feature is usually found in settings. Step: Select the device with the name [SOUK HSB0O1] [2] from the device list. When the pairing is successful, a Ho [Connected] tone will be heard. 600; 0) .
Optical Connection Ste pl: Remove the protective covers on both ends of the supplied optical cable. Step: Connect the digital audio in the optical jack on the soundbar to the optical out jack of the device with a digital optical cable. Step: Press the source button on the top panel of the soundbar or the optical button on the remote control to select the optical input.
AUX Connection Step: Connect AUX IN(audio) on the soundbar unit to theaudiooutjackofthe decreasing 3m audio cal Stop: Press the source button on the top panel of the soundbar or the AUX button on the the remote control to select the Aux input. Note:Some devices require manual setting of the ‘source output signal to SOUK Soundbar. RCA Connection Step: Connect AUX IN (audio) on the soundbar unit audiotape out jack of the device using an RCA to audiometer cable. Step: Insert the end of the RCA plugging the TV.
Sound Mode settings The SOUK soundbar has 3 built-in equalizers. You can select your favorite sound effects by using the function keys on the remote control. We have three types of sound effects: [Music], [Games] and [Movies]. You can switch between the sound effects using the corresponding graphic buttons on the remote control. A corresponding indicator light is displayed on the front panel of the product.
Place the Soundbar Put the Soundbar on the Table You can use the product on the desk of your TV or computer. Mount the Soundbar on the Wall Use the wall-mounted paper guide to measure the position of the hook part on the back of the product and mark it on the wall. Screw the attachment into the wall with the help of a drill or a screwdriver and hang it on the wall.
Troubleshooting Q: Why is the unit not muting on? A: Please check and make sure the power cord is correctly connected to a power source. Q: Why is there no sound or the sound is distorted? A: Please go over the following: » Check to make sure the audio cable is correctly connected. » Tum up the volume slowly. «Press the mute button to switch on the sound. + Press the play/pause button. = Set the audio output mode on your TV {if applicable) accordingly with the mode setting on the soundbar.
Specification Application 330" TV Bluetooth 50 Auxin Support RCA in Support Optical Connection Support Remote Control Support Driver 2X2.25" + Passive Radiator Wall-mounting Support Output Power 125WX2=25W Peak Power 50W Dimension W16.14XD3.84XH2.
Compliance Warming: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Attention: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Customer Service 12-month Warranty Period Within one year from the date of purchase, we will repair or replace the product for free if it does not work properly due to the quality of the product itself. Contact Us Mail: Manufacturer Name: Sheen Safety E-Commerce Co., Ltd Address: 102, 23 Bali Road, Kantian Street, Long gang District, Sheen, China.
TBE ® o AX (AF) == o BHI EEE Sy k CHE: PEMERRHCIR, SU O—>y MCDOWELL TWAT LASER TRESS D #7 o F3THBLWCREMICHEIHTE RY. $i.