Wireless Controller Instruction Manual KMD-NS-1144 Features: 1. This controller is suitable for games in the N-S/Lite，PC, Android system Console; 2. This controller supports wireless connection to the N-S/Lite Console and also supports wired connection to the N-S base. 3. Functional buttons of the controller corresponds to the functional buttons of N-S_pro Controller.
Product instructions: N-S/Lite Wireless connection mode 1. In the N-SL main menu interface, click on 'Controller'→‘Change grip/sequence’,enter the Controller pairing mode; 2. Press and hold the “Y”+HOME button for 4 seconds to enter the pairing state. The LED flashes frequently. The controller is automatically paired with the console. After the connection is successful, the LED been on; 3.
Sensors→Disconnect Controllers） N-S Wired connection mode Before using the wired connection, make sure that the 'wired connection of the Pro Controller' is turned on in the system settings of the N-S console; The Controller is connected to the Switch base through the USB cable, and can be used as a wired Controller, and the corresponding indicator of the Controller is flashed slowly; Unplug the USB cable and the Controller will switch to wireless mode and the console will automatically reconnect.
A, press “A+HOME” button at the same time for 2 seconds to start the controller B, LED1 flash, enter the search mode C, turn on the bluetooth of the Mobile phone, enter the search mode, click the searched handle in the device to connect (the first connection name is a series of Numbers) D. After successful connection, LED1 always on, and the handle can work normally Note: Not all android-based games are compatible with controller.
TURBO Function 1. The action button includes (A/B/X/Y/L/ZL/R/ZR) 8 buttons. All of them can set TURBO function manually; 2. Manual continuous hair setting: Press one or more action keys at will, then press “TTURBO”key to turn on manual continuous hair function; 3. Automatic continuous hair setting: Press the action key with the continuous hair function on again and press the TURBO key again to turn on the automatic continuous hair function; 4.
Programming Setting A. Programming single button steps: 1,Press "M1 or M2" + "-" for 2 seconds, the handle vibrates once, the LED4 flashes slowly, and enters the programming single steps ; 2. At this time, the M1 or M2 key can map handles A, B, X, Y, L, R, ZL, ZR, L3, L4, up, down, left, right, one of 14 key values One. (only one key can be mapped to the M1/M2 key in the programming mode). 3.
B.Programming multiple buttons steps: 1. Press and hold "M1 or M2" + "+" for 2 seconds, the handle vibrates once, and the LED4 flashes slowly, and then enters the multiple mode. 2. At this time, the M1 or M2 key can map the handle A, B, X, Y, L, R, ZL, ZR, L3, L4, up, down, left, and right arrow keys 14 combination keys (In the multiple mode, up to 16 key combinations can be mapped to the back key). 3.
Note: After the product sleeps, shuts down, and restarts, the previously set programming keys remain unchanged To clear the key value of the return key, you can press the "T" + "-" keys at the same time for 3 seconds, and the handle vibrates once to clear the key valuesof M1 and M2 Controller charging / sleep / wake / shutdown function: Controller charging function: a. When the power is low, the LED indicator flashes quickly; b. When charging, the LED indicator flashes slowly; c.
Input voltage / current: DC5V/500mA； Normal operating voltage / current: DC3.7V/20mA； Maximum working current: ≤300mA； Continuous use time: ≥8H； Charging time: About 3 hours Transmission distance: ≤10M； battery capacity: 600mAh Precautions: 1. Please do not store the product in a humid or hot place; 2. Do not knock, beat, puncture or attempt to disassemble the product to avoid unnecessary damage to the product; 3.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Product List: 1. game controller; 2. copy of the instruction; 3.
