IC-400-T, IC-525-T & IC-650-T IN-CEILING LOUDSPEAKERS
t l I,' ' 'r t i J rY\ ~A~t~ ~ , ..~lillil:1!l' . IC-400-T, .~ i·~ H 1 . :! . ! IC-525-T t , • ' & j IC-650-T Thank you for purchasing your Klipsch IC-400-T, IC-525-T or IC-650-T in-ceiling speakers. The IC-400-liC-525-T and IC-650-T in-ceiling speakers have been designed for music reinforcement applications. Unobtrusive, these loudspeakers are engineered for easy, versatile installation. 3.
5. Insert the speaker into the cutout hole. With a #2 Phillips screwdriver, tighten the four dog clamps until they are seated securely against the ceiling surface. Do not overtighten. Seismic Tab A seismic tab, located on the back of the speaker, is used as a secondary security point. Some construction codes may require its use. To utilize the seismic tab, run a support wire from a secure point in the ceiling and attach it to the tab. Be sure to consult the construction codes in your area.
IC-400-T FREQUENCY RESPONSE CONT. POWER HAND. 70-20k Hz +/- 4 dB 50 watts ( 14.5V) CALC MAX CONT. OUTPUT @ 1M SENSITIVITY 2 . 83 V/1 M 100 dB 86dB COVERAGE Dl 80 degrees 8 dB Q NOMINAL IMPEDANCE 6.3 8 ohms, min 4.2 ohms when switch is set to 8 ohm position DIAMETER CUTOUT DIAMETER 9.125" -------------------__..J 9" OVERALL DEPTH MOUNTING DEPTH 8.313" 8" 6 . 25 lbs. Terminal Strip 70V: 15W, 7.5W, 3.8W, 1.9W 100V: 15W, 7.5W, 3.
IC-650-T FREQUENCY RESPONSE CONT . POW ER HAND . CALC MAX CONT. OUTPUT _@_ 1 _M _ __ SENSIT I VITY 2. 83 V/ 1 M COVERAGE Dl Q NOMINAL IMPEDANC E 50-20k Hz + / - 4 d;;;.;B '----------------------' 80 watts ( 18.8 V) 106 dB 90dB 105 degre~e~s------~-~·--~-----~~-------~ 6 . 5 dB 4.5 8 ohms, min 4.4 ohms; switch set in 8 ohm position 10" DIAMETER CUTOUT DIAM ETER .___ _ _ _ _....;O;;...VERALL DEPTH 10.938" MOUNTING DEPTH 10.625" WE I GHT INPUT CO N N ECTORS 11 .25 lbs .
3502 Woodview Trace Indianapolis, Indiana 46268 USA 1· 800 · KLIPSCH • www.klipsch.
