Brochure

The IC-525-T packs proven materials and
wide dispersion horn technology into an
installer-friendly, UL-2043 and 1480 certi-
fied loudspeaker with an integrated back
can and multi-tap transformer. IC-T Series
speakers have been included in a num-
ber of major installations nationally, from
Bloomingdales in New York City to the
Ron Jon Surf Shop in Orlando.
The two-way IC-525-T features a
5.25-inch woofer, and a titanium dia-
phragm compression driver on a 3.5-inch
round modified XT Tractrix
®
Horn for
smooth response with constant directiv-
ity. A Tractrix port design helps to provide
deeper, fuller bass with less compression
and distortion, while a new, more
compact design simplifies low ceiling
mounting.
For distributed line applications, the
IC-525-T features a 70/100 volt multi-tap
transformer. A single rotary switch for the
8-ohm bypass and multi-tap setting is
conveniently located under the speaker
grille. The IC-525-T is shipped complete
with a tile bridge for installation in a
suspended ceiling or wherever additional
reinforcement of the ceiling material is
required.
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
In-Ceiling Loudspeaker
• Wider, shorter design to t low ceilings; multi-tap transformer
• 70-volt, 100-volt, or 8-ohm operation selectable via front
baffle switch
• Tractrix Port design for deep bass with less compression
• Wide dispersion Tractrix
®
Horn tweeter with XT technology for
clear sound in any location
• Designed to mix and match with Klipsch CA-T speakers
IC-525-T
Frequency response 65-20k Hz +/- 4 dB
Power handling 65 watts (16.5V) cont.
Q 4.5
Sensitivity 89dB 2.83 V/1M
Nominal impedance 8 ohms, min 4.2 ohms when switch is
set to 8 ohm position
Transformer taps 70V: 30W, 15W, 7.5W, 3.8W
100V: 30W, 15W, 7.5W
Maximum acoustic output 104 dB @ 1M
Coverage angle 105 degrees
Directivity index 6.5 dB
Transducers 5.25” woofer and 1” titanium
diaphragm compression driver on a
3.5” round XT modified Tractrix Horn
Enclosure tuning Vented via a Tractrix port
Input connections Terminal Strip
Thru hole width 9” diameter
Overall width 10.75” diameter
Overall depth 8.313”
Mounting depth 8”
Cutout dimensions 9.125” diameter
Weight 8.25 lbs.
Finishes Black and White
SpecificationS