User's Manual

ManualsBrandsKlik ManualsElectronicsTag V2

Table Of Contents

Tag 2 - User Manual

Note: The Tag 2 devices must be installed to provide a separation distance of at least

20 cm from all persons.

Deploying Tag 2

Required Equipment: iPad and Tag 2

1. Log in the SafeLink app using the provided credentials.

2. In the menu at the top right corner select “Deployment”. A corresponding map of the

event location should be displayed.

3. In the dropdown menu select “Deploy Tag”.

4. Turn the power switch of the Tag 2 on.

5. Select the approximate location of the Tag 2 in the map while pressing and holding

the tag’s button.

6. A pairing process should follow. Please hold the tag’s button until the pairing process

is complete.

7. Install the Tag 2 as instructed in the installation part.

Note: The deployed Tag may easily be relocated, but its new location should be manually

updated on the map.

Modified:

By: VGR <vgr@pixmob.com>

page 1/2

Summary of content (4 pages)

PAGE 1
Tag 2 - User Manual Note: The Tag 2 devices must be installed to provide a separation distance of at least 20 cm from all persons. Deploying Tag 2 Required Equipment: iPad and Tag 2 1. Log in the SafeLink app using the provided credentials. 2. In the menu at the top right corner select “Deployment”. A corresponding map of the event location should be displayed. 3. In the dropdown menu select “Deploy Tag”. 4. Turn the power switch of the Tag 2 on. 5.
PAGE 2
Installation Required Equipment: Double-sided tape and Tag 2 1. Make sure that the deployed Tag 2 remains ON. 2. Use double-sided tape to attach the deployed Tag 2 to a wall at a desired location. 3. Make sure it is firmly attached to the wall. Monitoring Required Equipment: iPad 1. Monitor the deployed Tag 2 devices using the SafeLink app. Active devices should appear in green on the event map. Modified: By: VGR
PAGE 3
IC Caution: -English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. -French: Le présentappareilestconf orme aux CNR d' Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 4
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.