Specifications

• Iconic Mid-Century Modern Styling
• Acoustic Suspension Design – The most accurate and linear
enclosure design available today
• Three-Position Acoustic Balance Control to tailor the loudspeaker’s
output for the most difcult acoustic environments
• Non-Resonant Die-Cast Aluminum Woofer Frame
• Machined Aluminum 1” tweeter faceplate
• KLH cabinetry featuring a structurally reinforced
¾” MDF Enclosure
• Thirteen Component network using high quality iron-core
inductors & Mylar capacitors
• Each speaker includes its own 8˚ slant riser base made of powder
coated 14-gauge steel
• Low-Prole Magnet Attached Grille
• 10-Year Warranty
KLH introduces the Model Three as an innovative, compact system that rivals the
largest of loudspeakers. The mid-century modern Model Three reects the iconic
styling and musical integrity unique to the KLH brand while providing a solution for
music enthusiasts with smaller listening spaces. Built on the acoustic suspension design
principle and advanced technology, the Model Three has very similar characteristics
and performance to the KLH Model Five. Don’t let the size fool you. Music will pour
out of the Model Three’s drivers to command every room, big or small.
Specifications
MODEL THREE
2-way, 8” Acoustic Suspension Loudspeaker
What’s in the Carton
Features
Finish
Genuine West
African Mahogany
Veneer and
Old World
Linen Grille Cloth
Stone Wash Linen
and Basalt Black
Knit Grille Cloth
available through
special order
Optional Accessories
Frequency Response: 46Hz – 20,000Hz +/- 3dB
Low Frequency Extension: -10dB @ 35Hz
In-Room Sensitivity: 88dB @2.83V / 1M
Free-eld Sensitivity: 85dB @ 2.83V / 1M
Power Handling: 150 Watts / 600 Watts Peak
Recommended Amplication: 30 Watts to 150 Watts
In-Room Maximum SPL: 108dB
Maximum Output @45Hz:
1
101dB
Impedance: 6 Ohms (3.7 ohm minimum @320 Hz)
Horizontal Dispersion: 140° Degrees
Features: Three-Position Acoustic Balance Control
Crossover Frequency: 1,600Hz
High Frequency Driver: 1" Aluminum Dome with Soft
Rubber Suspension
Low Frequency Driver: 8" Pulp-Paper Cone with Reverse
Roll Rubber Suspension, 1.5" Diameter
Flat-Wire Voice Coil
Enclosure Material: Structurally Reinforced ¾" Medium
Density Fiberboard
Inputs: Five-Way Gold-Plated Binding Posts
Height: 28.25" (71.8cm) w/ Included Riser Base
19.0" (48.2cm) w/o Riser Base
Width: 12.25" (31.1cm)
Depth: 11.5" (29.2cm) w/ Included Riser Base
10.5" (26.7cm) w/o Riser Base
Weight: 29Ibs. (13.2kg) w/o Riser Base
36Ibs. (16.4kg) w/ Included Riser Base
Included Accessories: 8° Slant Riser Base
1
:
1
/ 2 Space–Voice Coil Limited Excursion
Specications subject to change without notice.
(all specications for a single speaker)
• Model Three Loudspeaker and grille
• Matte Black Slant Riser Base
• Owner’s Manual
Shown in West African Mahogany